Used Chauvin Vibro Sieve for sale (420)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Itjdpfx Aszb Ikfocrjh Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. PLEASE NOTE THAT THE LARGE WINKWORTH MIXER IS NO LONGER AVAILABLE. ALL OTHER ITEMS ARE STILL HERE. Iodpfx Aew Nivlocrjth

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Itodpfxedzqn Do Acreh Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Sieving bucket / bucket / OQ65 / 1,170 mm For inquiries regarding attachments, Mr. Herden is available to assist you (please call ). Sieving bucket / bucket / OQ65 / 1,170 mm / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Cutting width (mm): 1,170 - Weight (kg): 830 Equipment: - Incl. OQ65 mount In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! Internal ID: 1U330 = Further information = Iedszckpyspfx Acreth Intended use: Construction Unladen weight: 830 kg Please contact Marius Herden for further information.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Isdpfx Acjv Rpnmoroth Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. Ijdpfxev Rmvze Acrsth General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: used, mileage: 1,22,506 km, power: 175 kW (237.93 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 6,380 kg, maximum load weight: 4,120 kg, overall weight: 10,500 kg, axle configuration: 4x4, wheelbase: 3,300 mm, brakes: engine braking, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,460 mm, loading space height: 1,760 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 122,506 kilometers * 4 x 4 all-wheel drive with drop-in tires * Ideal for conversion into a motorhome/expedition vehicle * Can be unloaded to 7,490 kg * Complete documentation and test books available * Aluminum body 4.30 m with standing height * Sortimo shelving system * Workshop equipment * Sieve pressure floor * DIN lashing eyes * Sockets * Interior lighting * Interior dimensions 4.30 m x 2.46 m x 1.76 m * Staircase can be slid underneath * Accessible box roof * Restraint system for superstructures on the roof * Trailer coupling * Trailer load: 13,500 kg * Additional ball head trailer coupling 3,500 kg * Leaf suspension front and rear * Driver's cab with 3 seats * Auxiliary heating * Air-sprung driver's comfort seat * 6-speed manual gearbox * Differential lock * Hill start assist * Multifunction steering wheel * Engine brake * Stereo CD * CB radio * Wheelbase 3.30 m * 10,500 kg gross vehicle weight * Unladen weight 6,380 kg. * Payload 4,120 kg. Ijdpfx Acevhp Uuerjth * the total weight is 10,500 kg, - the buyer can reduce the weight to 7,490 kg If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1,22,506 km, power: 175 kW (237.93 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 6,380 kg, maximum load weight: 4,120 kg, overall weight: 10,500 kg, axle configuration: 4x4, wheelbase: 3,300 mm, brakes: engine braking, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,460 mm, loading space height: 1,760 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 122,506 kilometers * 4 x 4 all-wheel drive with drop-in tires * Ideal for conversion into a motorhome/expedition vehicle * Can be unloaded to 7,490 kg. * Complete documentation and test books available * Aluminum body 4.30 m with standing height * Sortimo shelving system * Workshop equipment * Sieve pressure floor * DIN lashing eyes * Sockets * Interior lighting * Interior dimensions 4.30 m x 2.46 m x 1.76 m * Staircase can be slid underneath * Accessible box roof Iodpfevhp Uhex Acroth * Restraint system for superstructures on the roof * Trailer coupling * Trailer load: 13,500 kg * Additional ball head trailer coupling 3,500 kg * Leaf suspension front and rear * Driver's cab with 3 seats * Auxiliary heating * Air-sprung driver's comfort seat * 6-speed manual gearbox * Differential lock * Hill start assist * Multifunction steering wheel * Engine brake * Stereo CD * CB radio * Wheelbase 3.30 m * 10,500 kg gross vehicle weight * Unladen weight 6,380 kg * Payload 4,120 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net Isdpfx Aegmh H Tecrjth - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, Iodpfx Acsh S H T Ujreth hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Isdpfx Ajff Sbiecreth Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Itsdpfx Aod N Dn Decrjh Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) Itjdpfxsdv Eu Hs Acrjh - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm Itsdpjx Rq Sljfx Acreh 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grain steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with Load-Lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation, door lock on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: free support leg angle or free rear pivoting radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, bolted design, loading height reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, operation of 3 brakes (with starting assist up to max. 25 km/h). Floor: Sieve plate approximately 30 mm thick, cross members with omega insert, on longitudinal stringers for high point load capacity for forklift axle load up to max. 7100 kg. Ijdpfx Acekyrmiorsth Front wall/corner posts: 2,480 mm high, corner posts steel in full-volume design, release device for side tarpaulin on front wall, at the bottom inside at approx. 140 mm height with steel impact protection. Roof: Sliding tarpaulin, rear end lift that folds up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white, lifting roof hydraulically with hand pump at each corner post, can be raised by 400 mm. Can be driven with the roof raised, adjustable by 4 x 50 mm upwards. Note the overall height! Includes tarpaulin extension by 200 mm, only in conjunction with the tarpaulin.

Condition: refurbished (used), Year of construction: 2007, functionality: not functional, UNTHA RS30 SB-460 Year of manufacture: 2007 Used - Damaged Number of rotors: 4 Grinding chamber: 460 x 500 mm New blades: 1Z-66, 8Z-66 Motor power: 2 x 11 kW, 380 V, 50 Hz New sieve holes: Ø 30 mm Length/Width/Height: 1340/1250/1970 mm Iedpfxjxn Iwks Acrjth Weight: approx. 1100 kg

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Itodpfx Aexb D Swecrjh Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm Iedpfx Asy Nz Arocrsth - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Seydelmann Grinder -Type: AE130 Itedeyip Etjpfx Acroh -Power: 14/18 kW -Throat diameter: 130 mm -Dimensions: 1220 x 1050 x 1300 mm -Two-speeds for the working screw -Two-speeds for the feeder screw -Hopper capacity: 130 L -Weight: 800 kg -Set of knives and sieves -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

Condition: used, Year of construction: 2024, operating hours: 435 h, power: 175 kW (237.93 HP), empty load weight: 15,000 kg, Operating hours: 435, First registration: 24.10.2024_____ Two-engine version with JCB 55 kW / Stage 5. Dual-sided dirt pickup, towed. Basic equipment sweeper. Controls: The main control panel is mounted in the center of the cab with a JVM for displaying information on a wide range of sweeper functions, plus download capability for recorded data. Additionally, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for main sweeping functions is mounted on the door side. Suction fan: Variable suction speed from 1,800 rpm to 3,500 rpm, adjustable for different applications. V65t: Higher gear ratio: 1.79:1. Disc brush (gutter brush): Quick-change brush system with variable sweeping speed up to 160 rpm (adjustable from cab). Highly visible signal-yellow brush disc and hose routing. Suction mouth: Aluminum suction mouth with 250 mm inlet diameter and tool-free adjustment. Dust suppression system: Spray heads for dust control located at suction nozzles, disc brushes, and along the vehicle front. "Pressadrain" water reclamation system. EUnited 4-star PM10 certificate. Electrical system: 24 V. All external wiring harness connectors meet IP67 protection standards. External noise / Sound power level: LWA 108 dB(A) for engines with standard power, measured to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured to EC directive 2000/14/EC. Debris container: The superstructure comprises debris container and integrated water tank, made from high-strength Inox steel. Waterproof rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water strainer allows the debris container to be used as a large water tank for street washing. Standard equipment includes rear dump hatch, automatic multi-stage debris container support, two protected rear beacons, and LED work lights. Container volume: 6.5 m³. Tipping angle: 54° (nominal). Door opening angle: 125° (nominal). Water tank: The baffled water tank can be filled by a Type 'A' hydrant. The double-membrane pump is suitable for continuous duty and even dry run operation. Water volume: 1,545 l (optional 2,000 l). Exhaust hood: The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush: Roller brush Ø 406 mm. Roller brush width: 1,275 mm. Suction mouth width: 750 mm. Disc brush: 500 mm (opt. Ø 650 mm). Special equipment sweeper: Auxiliary engine: JCB 55 kW turbocharged, low emission to Stage 5, REQUIRES EN590 (or similar) LOW SULPHUR FUELS. Sweeping units configured for right-hand operation. Final assembly on customer-supplied MB Atego 1324. Pneumatic raising and lowering of the air guide sieve in the dirt container. Pneumatic shaker device for air guide sieve. Chain curtain in dirt container ahead of air guide sieve. Water tank connection coupling Type A, Storz 2 1/2 inch. Dirty water drain screen with graduated perforation mounted on rear door enables efficient... Itjdpjwxn Uajfx Acrsh

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights. Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly. Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly. Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front. Ijdofy Am Uopfx Acrjth Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Isdpfoxmt Eqjx Acrjth

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202038273, empty load weight: 5,680 kg, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 2,680 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: silver, Chassis, semi-trailer, logistics company Fine-grained steel welded construction in reinforced Scandic design, kingpin plate with replaceable 2" kingpin Outer frame in low-bed design: 7 pairs of lashing points embedded in the top and side of the outer frame, each with a capacity of 10 tons 10 pairs of combination pocket lashing points with ring lashing eyes (bolted) embedded in the outer frame, each with a capacity of 5 tons, approx. 72 x 42 mm internal dimensions Outer frame with "Load-Lock profile" for securing lashing straps, with a hole approximately every 400 mm 24 ton, 2-speed landing gear, single-side operation Free swivel radius to the support foot approx. 2500 mm, support foot dimension approx. 2600 mm, extendable ladder at the rear 2 chock blocks with holder Aluminum side impact protection Steel under-run protection, galvanized Spray guard at the rear, covering the entire width Quarter panel fenders in front of and behind the axle assembly with anti-spray splash guards, only on the last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of the axles, 1x on the left and 1x on the right 1 storage box across the entire width, closed, below the loading area, approx. w=450 mm/h=400 mm/d=2460 mm mounted directly in front of the axles 3 lashing/stanchion rails with 4 pairs of locking cutouts embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 1782 mm), approx. 80 mm high. With cutouts at the top and bottom for lashing and inserting stanchions 80 x 80 mm. At the bottom, an angled sheet is used as a stop, open to halfway down. Combined design for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters 10 combination stanchions with cutouts at the bottom, w=80/ d=50/ l=1200 mm 6 stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front 24 Volt EBS, electronic brake system with EBS socket at the front Caution: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab Wheels and tires 385/65 R22.5" Steel rims "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS Isdpfx Ajzbbpuocrsth Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side yellow LED lighting on the side, linked to the turn signal "flashing side marker lights" 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 2 additional LED work lights at the rear 1 LED roof marker light with holder 2 pairs of warning signs, LED illuminated and extendable to 3,000 mm 2 additional LED work lights at the top of the front panel additional 7-pin socket in the under-run protection at the rear Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 7,900 kg "Premium floor sealing" Floor sealed around the entire perimeter F

Condition: new, Year of construction: 2025, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of Iedpoy S D H Sjfx Acrjth the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, Year of construction: 2018, total length: 2,400 mm, total height: 1,000 mm, total width: 1,200 mm, Colour: Red Empty weight: 1.000 kg Itodpfoy Tmu Usx Acreh - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 600-797 - Main motor power [kW]: 22,2 - Rotation speed [rpm]: 1770 - Rotor width [mm]: 400 - Number of shafts [pcs.]: 2 - Opening width [mm]: 385 - Opening length [mm]: 93 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 18 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels