Used Compact Pump / Trailer-Mounted Pump for sale (32,503)

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, compact rotators, oil-hydraulic drive -Manufacturer: Thumm, oil hydraulic drive Type 211 -Mounting holes: Ø 30 mm -Dimension: Ø 175 x 320 mm Itedpjfz Rdmjfx Ahhjk -Weight: 23 kg

Condition: used, axle configuration: 1 axle, first registration: 10/2016, color: red, power: 15 kW (20.39 HP), gearing type: other, driver cabin: other, * German trailer * 1st owner * Condition – see photos * TRILO VANMAC SU60 leaf vacuum * The SU60 suction units are specifically designed for the rapid collection of leaves, debris, grass, wood chips, etc. * The TRILO® SU60 suction unit is mounted on a roadworthy chassis suitable for high-speed transport (up to 80 km/h) and can easily be coupled to your vehicle, allowing you to transport and start using it anywhere. * The SU60 comes standard with a 5-meter-long hand hose equipped with a robust end tube and handle. * The SU60 is powered by a reliable Honda 2-cylinder, 20 HP petrol engine with electric start. * The 600 mm diameter radial fan is enclosed in a wear-resistant double-walled housing and driven by a V-belt. * 5-meter-long hand hose * Adjustable, 360-degree rotatable discharge spout * Ø 600 mm turbine fan * Replaceable wear plates * Statically and dynamically balanced * Easy cleaning via dirt water drain cap * Unladen weight: 440 kg If you require a new technical inspection (TÜV), we will gladly obtain an offer from our partner workshops. Our offer is generally WITHOUT new TÜV, without new DGUV, without new SP, and without new UVV inspections. Ijdexu Nn Dspfx Ahhotk You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid misunderstandings about its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to verify the condition and features of the item/vehicle independently. Subject to alterations, prior sale, and errors.

Condition: new, Year of construction: 2025, Cryogenic centrifugal pump unit CRYOBASE CPD 160, year 2025 Itedpsznv Azjfx Ahhok For sale is a like‑new cryogenic centrifugal pump unit CRYOBASE model CPD 160 with horizontal electric drive motor for liquid nitrogen / oxygen / air (LIN / LOX / LAR). The pump has never been in service, was stored dry, and only mounted for test fitting; all original nameplates and safety stickers are in place. Key technical data Type: centrifugal pump CPD 160 for cryogenic liquid gases Flow rate: approx. 300 l/min Differential pressure / head: 22 bar / 160 m Motor speed: 6,750 rpm Motor power: 22 kW, IE3 efficiency Fluid: LIN / LOX / LAR, temperature down to about −176 °C Design: horizontal execution, axial suction flange, side discharge flange Required NPSH: 0.5 m This unit is perfect for industrial gas plants, storage and distribution systems, or upgrading existing cryogenic tank stations. Machine location: Cologne, Germany; inspection by appointment, worldwide shipping on request.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 726 kg, maximum load weight: 1,974 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper with electric tipping system NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping system 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tension lock Itodpfxezu Sgvj Ahhsk Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backward Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -35cm side panels -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bars -High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Pictures are examples and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come directly to us!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, Itodozd Uvlspfx Ahhok EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: new, empty load weight: 556 kg, maximum load weight: 2,160 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 900 mm, total length: 4,160 mm, total width: 1,640 mm, total height: 1,560 mm, Year of construction: 2026, Humbaur rear tipper HUK 272715 with 60 cm lattice extension and Flex-E pump, which enables easier tipping with a cordless screwdriver. Our price: €5,650 including 19% VAT, 6.4% delivery fee, and vehicle documents! Description: The HUK rear tippers are available as single-axle or tandem-axle models. Iodjzbkhtjpfx Ahhjtk These trailers are particularly distinguished by the galvanized platform with a V-groove outer frame and recessed lashing eyes. The tipping angle is 45 degrees. All models can be equipped with an electric pump and a lattice extension or aluminum side walls. Technical data: Trailer type: Two-axle Construction type: Aluminum Rear tipper 45° Weight: 556 kg Gross weight: 2,700 kg Payload: 2,160 kg Internal length: 2,680 mm Overall length: 4,160 mm Internal width: 1,500 mm Overall width: 1,640 mm Internal height: 300 mm, with lattice extension 900 mm Overall height: 950 mm, with lattice extension 1,560 mm Loading height: 670 mm Tires: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized Galvanized platform with V-groove outer frame and recessed lashing eyes, tensile force 400 kg per lashing ring Galvanized platform floor (3 mm) Side walls 300 mm, foldable all around Tow bar locks Conical corner posts Automatic support wheel Lighting protected in the underrun protection 3-stage telescopic cylinder Double-acting hand pump

Condition: used, This listing is for the Gram Vio Compact 610 Refrigerator The unit is in full working condition and is ready for immediate use although sins of wear include scratches to sides The Gram Vio Compact 610 is a professional-grade refrigerator designed for laboratory and medical applications. It offers reliable temperature control and energy efficiency, making it suitable for storing temperature-sensitive materials. Design & Features Exterior Finish: Available in white lacquered steel or stainless steel. Interior: ABS lining with stainless steel wall rails for mounting fittings. Itedpsxhf T Aofx Ahhsk Cooling System: Equipped with a finned tube evaporator and forced air distribution for uniform cooling. Defrost System: Automatic smart defrost with re-evaporation of defrost water. Control Unit: Gram Control Unit with voltage-free contact, alarms, and offset function. Alarms: Acoustic and visual high/low temperature alarms and door alarm. Applications The Gram Vio Compact 610 is ideal for: Laboratories requiring precise temperature control. Medical facilities storing biological samples. Pharmaceutical companies handling temperature-sensitive products The unit is moved easily on its lockable heavy duty castors

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 1,515 h, Wacker Neuson DT15 Compact Dumper / Tipping Dumper, Kubota Diesel, 2014 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. Itodpfxezqf A Ao Ahhok All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Itjdpfjzd Eynex Ahhjk Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Iedpfxezcv Sto Ahhjtk Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: used, empty load weight: 5,350 kg, maximum load weight: 13,650 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 10/2018, loading space length: 6,800 mm, loading space width: 2,450 mm, loading space height: 2,950 mm, total length: 10,020 mm, suspension: air, color: white, Year of construction: 2018, gearing type: other, driver cabin: other, construction height: 40,00,000 mm, Equipment: ABS, * German Tandem Trailer * Rare lift axle + forklift mounting, Edscha roof + sliding curtain * One owner * Premium manufacturer: RUFA * Tandem curtain side trailer with drop sides * Lift axle * Internal dimensions: Length 6.80 m x 2.45 m x 2.95 m * Edscha sliding curtain left/right & roof * Mounting for truck-mounted forklift * 270° swing doors * Central locking stakes * SAF axles * DIN lashing rings * Adjustable underrun protection * Manual support legs Iodpfx Ahew Eydmjhjtk * DIN-compliant load securing tarpaulin * Air suspension with raise/lower function * Storage compartments * Space for 17 Euro pallets * Disc brakes * LED interior lighting * Spare wheel * Reversing camera * Water tank * Gross vehicle weight: 19,000 kg * Payload: 13,650 kg * Unladen weight: 5,350 kg * Truck-mounted forklift Moffett available at extra cost If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, no new DGUV certificate, no new SP, and no new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misunderstandings regarding condition or suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Operating Instructions Itedpfezd D Scex Ahhsk The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: new, functionality: fully functional, empty load weight: 794 kg, maximum load weight: 2,706 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,685 mm, loading space width: 2,090 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Tilting Trailer 480/3 P 3.5T NEW VEHICLE NEW SERIES Internal dimensions: 468.5cm x 209cm Total weight: 3500Kg Payload: 2700Kg Braked tridem trailer Overrun brake and parking brake by AL-KO 3x 1350Kg axles and brake with automatic reversing function Low chassis Fully welded, hot-dip galvanized steel frame Loading platform hydraulically tiltable 11-degree approach angle No ramps required 15mm thick, robust and non-slip screen-printed wooden floor Automatic jockey wheel with 400Kg support load Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors Lights and license plate holder are foldable Winch with brake and mounting bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Full aluminum floor made of Alupanel panels -Aluminum floor with wooden support -Anti-sway coupling -2 wheel stops for perforated steel track -Wheel stops across the entire width Itodpfx Ahexp U S Rehsk Further accessories on request! Plus freight to Gera and vehicle registration document €400 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open from 8:00 AM to 5:00 PM on weekdays for all kinds of repairs. Specialist in axle repair, also for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. With us, you will also find a variety of rental trailers. Visit us online or come by directly.

Condition: new, maximum load weight: 1,078 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 300 mm, total length: 3,765 mm, total width: 1,310 mm, total height: 830 mm, Year of construction: 2026, Humbaur Startrailer with cover and supports LH1500 Price - 2350 EUR incl. 19% VAT, cover and supports included, incl. 6.4% delivery fee and vehicle documents Technical data: * Trailer type - Single-axle * Construction - Aluminum * Weight - 231 kg * Total weight - 1,300 kg * Payload - 1,078 kg * Internal length - 2,510 mm * Overall length - 3,765 mm * Internal width - 1,310 mm * Overall width - 1,800 mm * Internal height - 300 mm incl. cover 1,600 mm * Overall height - 830 mm incl. cover 2,150 mm * Loading height - 530 mm Itodpezphqmjfx Ahhok * Tires - 14 inches Standard equipment: 13-pin connector * Side walls made of anodized, double-walled aluminum profiles * Fixed front wall and flap with sturdy latches * Lashing eyes integrated into the side walls, tensile force 400 kg per lashing eye, Dekra tested * Multifunction lighting integrated into the underride guard * Corner posts with slots for attachments * Pre-assembled mounting buttons for cover attachment to the side walls Description: Do you need to transport garden waste, small bulky items or larger purchases? Then the low-loader Startrailer will inspire you. It is particularly light, versatile and looks good. Note, for example, the attractively designed, discreet latches of the rear flap.

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Itsdpfxjzt Imij Ahhjk Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Iodpfx Ahoyablmjhotk Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Itedpfxoy Ai Hls Ahhok

Condition: new, maximum load weight: 1,590 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 4,064 mm, loading space width: 1,774 mm, loading space height: 2,000 mm, total width: 2,292 mm, total height: 2,634 mm, Year of construction: 2026, Box trailer - HK 254018-20P FlexxZurr Additional models, sizes, and versions are available, or can be ordered and configured individually according to your requirements. Please feel free to contact us – we will provide you with personal advice! Our price: €7080 incl. 19% VAT, incl. 6.4% delivery fee, and vehicle documents! Description: This tandem plywood box trailer impresses with its well-thought-out details and versatile applications. The frame and chassis are made of hot-dip galvanized steel, giving the plywood box trailer series a long service life. The body is completely made of 15 mm multi-layer wood with a special plastic coating, and can be fitted with your company’s advertising on request for an additional charge. A light is installed in the interior for better visibility. All plywood box trailers are equipped with hinges and a lockable twist-lock closure made of galvanized steel. Seals made of plastic are mounted on the doors, allowing for water-protected transport of your goods. The aluminum reinforcements in the roof area and on the lower front panel give the Humbaur plywood box trailers extreme stability. The floor of the plywood box trailers consists of special wood that is multiple times glued for water resistance, with a non-slip phenolic resin coating and 15 mm thickness. The integrated side lashing system is mounted in the anodized side frame profiles. We provide a tensile force of 400 kg per lashing point, and it is Dekra-approved. This system can be expanded on request and provides the transporter with sufficient options to secure the cargo. Edge profiles, a torsion-resistant rear portal, and rain gutters are made of anodized aluminum and offer the highest level of protection against corrosion. The Humbaur tandem plywood box trailer – the ideal partner for transporting your goods. Technical data: * Trailer type: Two-axle * Design type: Plywood * Weight: 890 kg * Total weight: 2,500 kg * Payload: 1,610 kg * Internal length: 4,064 mm * Overall length: 5,546 mm * Internal width: 1,774 mm * Overall width: 2,292 mm * Internal height: 2,000 mm * Overall height: 2,634 mm * Loading height: 560 mm * Tires: 15 inches Standard equipment: V-drawbar, hot-dip galvanized Iodjzdcn Rjpfx Ahhjtk * 13-pole plug and reversing light * Floor panel 15 mm thick * Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating * Interior light installed * Double-wing rear door * Twist-lock closure and hinges galvanized * Lashing points in the frame profile, flexibly adjustable, tensile force 400 kg per lashing point, Dekra-approved * Automatic jockey wheel

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations Ijdpfjytgvwsx Ahhetk - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: new, incl. tiltable – perforated tracks + phenolic plywood & checker plate in the centre / hand winch Technical Specifications: • Brand: Martz • Model: GT KIPPBAR 400 • Vehicle type: Car transporter • Vehicle condition: New • First registration: Unregistered • MOT/General inspection: 2 years from first registration • Internal dimensions (LxWxH): 405 x 210 x 0 cm • External dimensions (LxWxH): 556 x 215 x 77 cm • Perm. gross weight: 2,700 kg • Unladen weight: 667 kg • Payload: 2,033 kg • Chassis: Platform trailer (wheels underneath) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable Itedpfjx Tbi Tex Ahhek DESCRIPTION • Perforated steel tracks, ideal for secure lashing • Between tracks: phenolic plywood deck with central aluminium checker plate, anti-slip and water-resistant • incl. steel loading ramps • tiltable loading platform • very low chassis for minimal loading angle • tiltable loading platform (8° approach angle) • very lightweight trailer with robust construction • additional 8 lashing rings in the side floor • braked KNOTT rubber torsion axles • automatic reverse feature • KNOTT overrun device and parking brake • very robust, bolted and reinforced V-drawbar • 13-pin plug • reversing light • high-quality safety lighting • integrated rear fog light • recessed lighting in rear frame • rear positioning lights mounted • jockey wheel mounted Optional accessories – feel free to inquire: • 100 km/h approval with shock absorbers • anti-theft device • spare wheel • storage box • reversing light • lashing straps • and more. New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration papers can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialised dealers & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions, and prior sale -

Condition: new, maximum load weight: 323 kg, overall weight: 450 kg, total width: 1,880 mm, total height: 860 mm, Year of construction: 2026, SMART BIKER 1 The new, practical, and low-maintenance motorcycle lowering trailer Simple lowering and lifting mechanism: From now on, you can easily and conveniently load and unload your motorcycle by yourself Lowerable - user-friendly - space-saving Important Safety Notice Dear Customers, We must inform you that fraudsters are copying our vehicle advertisements on and eBay Classifieds and offering them on other, fake websites at a significantly lower price. Please note: Our advertisements are only valid on the official platforms of and eBay Classifieds. Any forwarding or posting on other portals is fake and for fraudulent purposes. To protect our vehicles from such misuse, we do not publish all detailed information in our ads. Full information is only available when you contact us directly. If you are seriously interested, please contact us directly by email or phone. Thank you for your understanding. 450 kg gross vehicle weight, payload up to 327 kg 100 km/h approval for Germany Load and unload your motorcycle on your own, no ramps required. Lowerable: quick, simple, and convenient loading. Upright storage: space-saving due to vertical positioning. Please request current stock status. If your desired color is not available, we typically deliver the requested trailer within 4-5 weeks. Upon ordering, you may choose: Paint finish - our standard colors are: deep black - anthracite - white - red - orange - blue For a small additional charge, you can also choose a custom paint finish from the entire RAL color palette. Please note: mounted parts such as mudguards, lamp carriers, etc. are always painted black. Aluminum wheels - two variants available: two-tone silver/black or solid black Delivery options 1. Collect yourself in 53919 Weilerswist, with handover briefing – free of charge 2. Delivery on its own axle with handover briefing – pricing on request 3. Forwarding shipment on pallet to curbside (without briefing) – pricing on request Standard equipment Welded steel frame Ijdpfevm Iwlex Ahhjtk Galvanized frame parts with powder coating Lowering and lifting mechanism with additional lock and bolt safety Space-saving upright storage Adjustable front wheel chock Foldable rear boarding plate 10 lashing points for tie-down straps SPP rubber spring axles 195/55 R10C tires on aluminum rims Painted steel mudguards Folding license plate holder for two-line plate 12V lighting system, 13-pin connector LED taillights LED marker lights + lane marker lights Plastic wheel chocks Technical data Gross vehicle weight: 450 kg Unladen weight: 127 kg Payload: up to 323 kg Tires: 195/55 R10C on aluminum rims Dimensions in drive position: 248 x 188 x 86 cm (LxWxH) Storage height in upright position: 200 cm Max. motorcycle wheelbase: 1650 mm Offer price incl. 19% VAT. Financing available, e.g., monthly payment of EUR 90.00 for 24 months, or monthly payment of EUR 175.00 for 12 months. Contact us for details. Subject to credit approval. Visit us or contact us in writing. Viewing Mon-Fri 09:00–17:00, Saturdays 09:00–12:00. Offer and further information on request: Office tel. Technical changes, delivery with equivalent components, errors, and omissions excepted.

Condition: used, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 10/2023, Year of construction: 2023, Baos M353616 Full-Aluminum Construction Machinery Trailer / Machinery Transporter Car Trailer 3,500 kg Condition: as new (Year of manufacture: 2023) Demonstration unit TÜV inspection: new Immediately available Technical specifications: Permissible total weight: 3,500 kg Unladen weight: approx. 660 kg Payload: approx. 2,840 kg Number of axles: 2 Loading area length: 3,550 mm Loading area width: 1,650 mm Brake type: braked, overrun brake Chassis: low-loader (wheels next to body), rubber torsion axles Electrics: 12V, 13-pin connector Tire size: 195 R14C Equipment: Heavy-duty automatic jockey wheel with strut Bucket holder Phenolic resin coated anti-slip floor plate 2x lashing points 2000 daN at the rear of the loading area 8x floor anchors 800 daN mounted laterally in the loading area 4x aluminum tie-down rings on the outer frame Automatic jockey wheel Foldable aluminum loading ramps incl. support stands Ijdpfxezq Hcdj Ahhjtk Aluminum plug-in panel between aluminum loading ramps Aluminum mudguards Welded frame V-drawbar AL-KO or Knott axles and brake system 100 km/h speed approval Despite the utmost care, errors in this advertisement cannot be excluded. Subject to prior sale and errors!

Condition: used, axle configuration: 3 axles, first registration: 06/2002, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2002, Axle configuration Tire size: 385/65 R22.5 Axle brand: Fruehauf Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Ijdpfx Ajzgmh Ejhhjtk Rear axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 5,980 kg Payload: 32,020 kg GVW: 38,000 kg Condition Damage: None

Condition: new, incl. ramp recess with ramps / closed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 400 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU (inspection): 2 years from first registration • Interior dimensions (LxWxH): 405 x 199 x 0 cm • Exterior dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Flatbed trailer (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axles • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • incl. manual cable winch with brake • Ramp storage compartment under the loading platform • 2x steel loading ramps • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • 8x lashing rings recessed in the side frame (600daN/kg) • Side panels can be retrofitted at any time • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin connector • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Tail lights recessed in the rear frame • Automatic jockey wheel mounted Retrofittable accessories – feel free to enquire: Itsdsx S Rm Espfx Ahhsk • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance, or export license plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available on site! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Itedpfx Aheyn Uhwjhsk • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.