Used Compounding-Extrusion-Pelletizing Line for sale (10,736)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm Isdpszxr Uuefx Ab Ijbb - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. Isdpfx Ajzw Apgjb Ijbb The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM Iodpjy Splgefx Ab Ijbb • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: used, Year of construction: 2023, functionality: fully functional, power: 1.1 kW (1.50 HP), Aluminum Angle Conveyor | Year of Construction 2023 | Manufacturer Sale High-quality aluminum angle conveyor for industrial applications. For sale is a used angle conveyor from a customer's facility. We are the manufacturer of the system. The conveyor was replaced with a larger system as part of a new investment and is now being sold on behalf of the customer. The system is in technically perfect condition and can be inspected by appointment. Technical data • Year of construction: 2023 • Manufacturer: die magnetprofis • Conveyor type: Aluminum angle conveyor • Belt width: 500 mm • Usable width: 300 mm Iodpjzxumtsfx Ab Ijbb • Horizontal section: 4,500 mm • Rising section: 2,200 mm • Total length: 6,100 mm • Inclination angle: 45° • Discharge height: 1,800 mm • Height of horizontal section: 200 mm Drive • Gearbox motor • Power: 1.1 kW • Conveyor speed: 0.3 m/s • Connection: 230/400 V, 50 Hz • Protection class: IP54 Conveyor belt • PU cleat belt • Belt width: 500 mm • Wavy edge 50 mm • T50 cleats spaced approximately 400 mm apart • Cross-stable, 2-ply belt • Guiding in the bend area via bottom idler rollers Areas of application • Wood industry • Biomass • Recycling • Bulk goods • Packaging • Production plants Condition ✔ Year of construction 2023 ✔ Fully functional ✔ Very well-maintained condition ✔ Immediately available upon agreement An inspection under power is possible after scheduling an appointment. Loading can be assisted. Net price plus VAT. Conveyor, belt conveyor, inclined conveyor, angle conveyor, bend conveyor, discharge conveyor, discharge system, conveying technology, conveying system, material conveyor, transport belt, cleat belt, cleat conveyor, wavy edge conveyor, inclined conveyor, elevating conveyor, industrial conveyor, aluminum conveyor, aluminum conveying system, conveyor belt, used conveying technology, used conveying system, used machine, industrial machine, mechanical engineering, production, automation, conveying line, material transport, bulk goods conveyor, bulk goods technology, wood conveyor, wood industry, biomass, pellets, wood chips, firewood, roundwood, wood waste, wood processing, sawmill, carpentry, joinery, recycling, recycling technology, plastic recycling, metal recycling, disposal technology, packaging technology, sorting system, production plant, industrial plant, conveyor belt 500 mm, conveyor belt 500 mm, PU conveyor belt, cleat belt.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Ibodpeztu Dbefx Ab Ieb Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute Isdpfx Abex Ezuyj Ijbb

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, warranty duration: 6 months, total width: 970 mm, total length: 1,270 mm, total height: 1,565 mm, empty load weight: 365 kg, year of last overhaul: 2026, input voltage: 400 V, WP Haton CR59 AT Ibjdett Ap Ejpfx Ab Ieb

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Ibodpfx Abjxu E E Sj Ieb Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Ibjdpfxozuk Irj Ab Ieb Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 It is supplied without a screw and is in very good condition; the machine was never used in production.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Ibedeyzxyxjpfx Ab Isb Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Ijdpfey Aad Ijx Ab Iobb

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Isdpfezza Axex Ab Isbb - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Condition: used, - 3-layer blown film line on rotary platform - Product-specific modifications and adjustments are possible (subject to charge) - Spare screw, spare cylinder and various spare parts are additionally available for this line Ibjdpfx Aoxq Hcdjb Ieb Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). Ibjdpfx Absy R I Uqo Ijb • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Ibjdpfxjw Ry U Io Ab Iob

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine Ijdpfjzmd Uijx Ab Iebb AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 1993, operating hours: 1,04,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Iodsvl Hzgspfx Ab Iobb Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2021, condition: used, The Matho Cuttobag CB-100 is a compact, mobile cutting and extraction system for production waste such as edge trimmings and die-cut grids. It is designed as an all-in-one, stand-alone solution for production lines in the printing, label processing, packaging, and film extrusion industries. The Cuttobag reduces downtime and minimizes the manual effort required for waste disposal, as the material is directly shredded and collected. The CB-100 bag version has an integrated big bag with a capacity of approximately 300 liters. Ibjdpfezzkcpex Ab Ijb

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: Ibedpfx Aex Dkmgjb Iob • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. Ibsdpfxoycfw Es Ab Ieb A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Stainless steel cooling tank Sheer dryer Ibedpfx Aboxzfdbj Ijb Sheer granulator

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: Iodpfx Abetzmifj Iobb -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Iodpfxjtiy Nts Ab Ijbb Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Ibodpfxszuk Hbe Ab Isb Type: DS 8.7 Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Year of construction: 2006, condition: excellent (used), Name: Used twin-screw extruder Plama number: DE27676 Manufacturer: Leistritz Ijdpeqqh Unsfx Ab Iebb Type: ZSE 130 GL Year of manufacture: 2006 Screw diameter: 2 x 130 mm Length L/D ratio 35 D Motor: 500 KW Material: PE, PP, PS, ABS + fillers Capacity: 1000 - 2000 kg - (depending on material) Control system: Currently without control cabinet, but can be offered separately Details: Co-rotating, degassing, segmented screws and barrels Options: Screen changer, dosing, granulation, control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.