Used Cox & Plant Hs6434.2 for sale (3,116)

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit Gedpjw Uvdgjfx Ap Dokc

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Gsdpfx Apexc Ni Rj Dskc

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material Gedpfxow N Rv Tj Ap Dekc - Warranty available upon request! - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: used, Debarking plant with drum debarker and disc chipper. Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Gkedpfxew N Rxbs Ap Dsc Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Gkjdpfewgc Udox Ap Doc Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® VS COMPACT vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical specifications: Gkedowhkuuspfx Ap Djc - System capacity: 18-23 t/h - Maximum bucket width: 1.6 m - Screening area: 1.5 m² - Drive power: 230 V / 2 x 0.35 kW - Weight: 557 kg - Width: 1.88 m - Length: 1.31 m - Height: 2 m - Loading height: 1.63 m Options: - Poles - Hopper - Support feet

Condition: used, Field of application: Mining Plant Model PTK156 Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4 Top Deck Size 5,000 x 1,500 mm Bottom Deck Size 5000 x 1,400 mm Weight: 34,500 kg Transport Dimensions (mm) 16,500 x 3,250 x 3,400 Operation Dimensions (mm) 17,400 x 14,400 x 4,450 Godpfjyf Utnjx Ap Dokc

Condition: used, power: 160 kW (217.54 HP), Field of application: Mining Experience the pinnacle of versatile crushing with Polygonmach Machinery’s Tertiary Impact Crusher (HSI). Engineered to deliver exceptional performance in a wide range of applications, this advanced crusher takes your aggregate production to new heights. The Tertiary Impact Crusher (HSI) is specifically designed for fine crushing and shaping of hard and medium-hard materials. It stands as the ultimate solution for producing high-quality aggregates with precise particle shape and consistent gradation. The Tertiary Impact Crusher (HSI) utilizes a high-speed rotating rotor that generates a powerful impact force. This force efficiently reduces the material size, resulting in finely crushed particles ideal for a variety of applications. When it comes to stone types, the Tertiary Impact Crusher (HSI) proves its versatility. It can effectively handle various types of stones, including limestone, granite, basalt, and more. The crusher's robust design and specialized components ensure optimal performance, regardless of the stone type, making it suitable for a wide range of aggregate production needs. Let's delve into the key components of the Tertiary Impact Crusher: Rotor: The high-speed rotor delivers powerful impacts to the incoming material, ensuring efficient reduction and shaping. Blow Bars: Robust blow bars withstand high impact forces and ensure efficient crushing of the stones. Godpfjygqw Sox Ap Djkc Adjustable Curtains: The adjustable curtains regulate the product size by controlling the gap between the rotor and curtains, allowing precise customization. Feed Hopper: The feed hopper efficiently directs the material into the crushing chamber, ensuring a steady and continuous flow. Technology: impact Mobility: stationary Other characteristics: fine, tertiary, stone, limostone Capacity: Max.: 350 t/h(214 lb/s)Min.: 80 t/h(49 lb/s) Motor power: Max.: 500 kW(679.81 hp)Min.: 160 kW(217.54 hp) Opening height: 1,100 mm, 1,300 mm, 1,400 mm(43.3 in, 51.2 in, 55.1 in) Opening lenght: Max.: 1,800 mm(70.9 in)Min.: 500 mm(19.7 in) net weight: Max.: 33,000 kg(72,752.55 lb)Min.: 10,000 kg(22,046.23 lb)

Condition: used, mileage: 5,70,000 km, power: 300 kW (407.89 HP), gearing type: mechanical, fuel type: diesel, color: red, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 03/2010, emission class: euro4, brakes: engine braking, suspension: steel, driver cabin: day cab, wheelbase: 4,200 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, Kz. Haus, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, leaf suspension, aluminum tank, low-noise G1, U-protection, sunroof, green environmental badge. Wheelbase: 4200 mm, Body: interchangeable system consisting of a Stetter concrete mixer body, approx. 9 m³, and a three-sided tipper body, surcharge of €6,000, 7.5t front axle, H7 13t rear axle, bevel gear 233, ABS can be switched off, Telligent braking system with ABS and ASR, disc brakes on front and rear axles, stabilizer on rear axle, steel bumper, PSM, preparation for toll collection, distributor cockpit, Telligent gear shifting II, construction site filter, on-board diagnostics 1.0, transmission oil cooler, double PTO MB 124-11B/1C flange + MPA M-speed, engine output to the rear 600 Nm. VIN: WDB9333041L296831! All information is subject to change as the vehicle is in transit! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Kroatien Gjdpfx Asyniw Hep Dokc ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit... Gsdpfx Apex D Df Ne Dskc

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Gkedpjx I Rqvofx Ap Dsc

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Gkodjyyzv Tjpfx Ap Dsc

Condition: used, Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks. Capacity: 202 m3/h Operating pressure: 10 bar Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks. Gksdpfxsyzhz Ss Ap Dsc

Condition: used, Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings Additional title: 3-vessel plant Volume and dimension per tank: 20 hl Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm Gkodpfx Apjyzh Dgo Doc Length: 4500 mm Width: 1700 mm Height: 2100 mm Operation / Control: electrical box with buttons, switches and temperature controls Material: stainless steel Position: free standing Base construction: standing tanks with lids, on pipe feet Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Godpsy E Huxefx Ap Dskc

Condition: new, functionality: fully functional, power: 340 kW (462.27 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-90 is a middle model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-90 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. TECHNICAL SPECIFICATIONS: - Bunker: 20 m3 - Plant Dimensions (1st chassis): 11500x4600x4200 mm - Second chassis: 15500x4650x4400 mm - Production Capacity: 100-180 Tons Per Hour - 1st Crusher: Jaw Crusher – 900x650 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1250 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks - Total Motor Power: 340 Kw - Generator (optional): 450 kvA MCK-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Gedey Db T Tspfx Ap Dekc • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, power: 90 kW (122.37 HP), color: grey, Year of construction: 2026, 950 It is a fully mobile body, new stone crushing and screening plant Gedpfx Apewfnquo Djkc GNR 950 Mobile Crushing and Screening Plant has a capacity of 160/240 TPH. It can easily break stones of different hardness. Complies with international shipping standards. Installation and commissioning is done in a short time. Local workers (staff) are taught how to control. Lifetime spare parts support is provided. OPTIONAL - By-pass system - Magnetic magnet - Generator System - Dust Removal System - Frequency Control System is used instead of soft starter - Control cabin and air conditioning Please call us for our other crushing plants and customized solutions.

Condition: new, power: 90 kW (122.37 HP), fuel type: electric, color: orange, Year of construction: 2026, Equipment: air conditioning, cabin, Diamond 60 Mobile Concrete Batching Plant - 60 m3 / h Capacity Gedjwfqxnspfx Ap Djkc General Makina has a wide variety of manufacturing capacities in 30m3/hour, 60m³/hour, 90m³/hour, 100m³/hour, 120m³/hour and 150m³/hour; with which you can produce ready-made concrete according to your needs. The fully automatic PLC control cabinet for the power plant operator is included in the mobile platform. 1 Year warranty excluding wearing parts and use errors. Local delivery with the necessary operation, maintenance training, and spare parts support for a minimum of 10 years. You can contact us for the right mobile concrete batching plant solutions for your needs.

Condition: new, power: 132 kW (179.47 HP), Year of construction: 2026, MCK 110 Mobile Jaw Crusher system, it breaks, sifts and washes stones. Godpfx Apewfr N Us Dskc This special design facility consists of two groups. The first group crushes the stones to the desired size with a mobile jaw crusher. The second group crushes them smaller. Also, the second group doing screening and washing stones. You can contact us for our customized solutions.

Condition: used, functionality: fully functional, Infeed: 1,000 x 350 mm, max. workpiece size: 320 x 320 mm, 45 kW electric motor 4-stage vibrating feeder HERWEG, approx. 800 x 4,000 mm, 2 x 4 kW drive with infeed and outfeed hoppers semi-mobile steel structure with platform, railings, and access stairs. Gjdpfswb Dfgex Ap Dokc

Condition: used, Complete primary and secondary crushing plant, consisting of the following components: Primary crusher: LOKOMO K-140 single-toggle jaw crusher 1,400 x 1,200 mm, feed hopper, vibrating feeder and discharge chute. Secondary crusher: LOKOMO G4214 cone crusher, cone diameter: 1,350 mm, feed and discharge box, electrical and hydraulic installation. Screening plant: LOKOMO B 256T, screen area: 4,000 x 1,300 mm, with steel structure. Secondary crusher: LOKOMO S21-14 cone crusher, cone diameter: 2,100 mm, hydraulic installation; optionally with steel structure. Conveyor belts: LOKOMO 800mm x 10m, 1200mm x 6m, 1000mm x 31m, and 1400mm x 32m. Gjdpfxewcyh Ho Ap Dekc

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS BIG vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Gkedpfx Aswhmlvop Dec Technical Specifications: - System capacity: 40-150 t/h - Maximum bucket width: 3 m - Screening area: 12.8 m² - Drive power: 400 V / 2 x 1.5 kW - Weight: 2457 kg - Width: 3.62 m - Length: 2.41 m - Height: 2.85 m - Loading height: 2.46 m Options: - Bars - Hopper - Support feet - Separator plate

Condition: new, functionality: fully functional, power: 315 kW (428.28 HP), fuel type: electric, color: grey, Year of construction: 2026, Mobile impact crusher marble recycling crusher ( High Capacity ) Another practical stone crushing machine from our company that meets the different needs of our valued customers, Gkedpfewhnbrsx Ap Dec Mobile primary impact crusher. It is possible to reach a capacity of 250 / 500 tph in non-hard mines and minerals. You can easily increase the capacity of your quarry or recycling area in your new projects or already working. You can call us for our practical and innovative solutions for you.

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) Gkjdpfx Apoyh Hnge Doc One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: refurbished (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products Godpfxoyidu He Ap Dekc new drum and pistons SKG54-AKG75 weight range 25-160 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2026 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg