Used Ct 4 Servo for sale (62,385)

Condition: ready for operation (used), Indramat CLM 01.3-X-0-4-0 servo controller without display and hardware module, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Guedoi Ebbqopfx Akasg

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. Godpfx Akozl Uzwsasug The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Gedpfx Akjylaqljasug Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Condition: used, TERMIK Range Gas or diesel-powered 5 decks, 15 openings Usable area: 23.10 m² With integrated loading elevator Maximum power: 128,000 kcal/h, equivalent to 149 kW Forced hot air circulation 2 fans on the 180 series High-efficiency heat exchanger Heat distributed between ceiling and floor Independent steam generator per chamber Steamers located near the combustion cylinder Steamers’ power consumption: 1.5 to 2 kW Standard steam generator: 4 kW Stainless steel and tempered glass doors Removable doors for cleaning Overpressure valves on each chamber Electrical panel with IP55 protection Steamers accessible from the front Internal dimensions: 1850 x 2500 mm External dimensions: 2485 x 3650 mm Loading clearance: 3060 mm Used Tagliavini CT 185/L cyclothermic oven – 23.10 m² baking area General Overview The Tagliavini TERMIK CT 185/L is a professional, multi-deck cyclothermic oven designed for bakery operations that require a large baking area and even heat distribution. This configuration features 5 baking chambers for a total usable area of 23.10 m², with internal dimensions of 1850 x 2500 mm. Gusdpszyaktofx Akajg The cyclothermic principle is based on the forced circulation of heat from the combustion chamber. In the 180 series, two fans direct the heat flow through the ducts surrounding the chambers, achieving a balanced temperature from the bottom to the doors. The CT 185/L can operate on gas or fuel oil/diesel.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Godpjyzf E Uofx Akaoug Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Condition: new, Year of construction: 2022, functionality: fully functional, Extruder for protein, TVP, and high-moisture analogues. 110 kW. This equipment has never been used and is complete. Pre-conditioner Extruder Polycool 500 and one Polycool 1000 6 cooling and heating regulators, Thermoplas. Gedpfozh I Dqsx Akasug Dosing system, Bühler (loose weight) for protein Stainless steel control panel Venting system for the extruder Dosing system for liquids (Netsch)

Condition: used, mileage: 4,69,300 km, power: 300 kW (407.89 HP), first registration: 08/2003, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, loading space volume: 9 m³, Year of construction: 2003, Equipment: ABS, air conditioning, electronic stability program (ESP), * MB 3241 B * Liebherr HTM 904 * 500L water tank * leaf-sprung suspension * medium-length cab * differential lock (rear axle) * sun visor * electric windows and mirrors * air-suspended driver's seat * AP axles (rear axle) * Telligent II transmission * wheelbase 4200 mm * transmission oil cooler * reinforced clutch * and more. Godpjzk Sfdsfx Akajug

Condition: good (used), Year of construction: 1992, operating hours: 14,148 h, Linde H16T Triplo 470 Freelift / 3rd function on the mast / VW 1992 / 14,050 hours, LPG powered. Dutch registration. A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for an inspection and/or test drive. Please call beforehand as we are not always on site. Gjdpfxozxq Slj Akaoug Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Gjdpfxjyhgnie Akasug

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. Godpjxcupcjfx Akajug _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR Gedpou Aardjfx Akasug - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Guodoyxm Tnspfx Akaog Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Year of construction: 2025, condition: new, This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 4; capacity: according to customers samples, containers and filling quantity; working range: adjustable from 2-9999 per container; product sizes: min. Ø 10mm, max. Ø 60mm; large infeed hopper; compressed air: 6bar; power: 220V, 0.6-1.7kW; machine dimensions: LxWxH customized. The image shows the 8-line version. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gujdpfx Aov Nk I Eekaeg

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Gsdpfxjxv Dhns Akasug Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: new, functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, The HDS 9/17-4CXA FARMER is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high user-friendliness. Its 4-pole electric motor, robust 3-piston axial pump with ceramic pistons, and economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Technical Specifications: Condition: NEW Model: HDS 9/17-4 CXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 290-900 Operating Pressure (bar): 30 - 170 Maximum Pressure (bar): 210 Fuel Consumption (kg/h): 5.6 Connected Power (kW): 6.5 Power Cable (m): 5 Weight with Packaging (kg): 129.8 Dimensions (L x W x H) (mm): 1060 x 650 x 920 Included: Automatic hose reel with 20m DN8, 400bar, 155°C hose Hand Spray Gun: EASY!Force Advanced with Servo Control Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 15L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Control panel with illuminated indicator Pressure cut-off Automatic hose reel: The integrated original automatic reel allows for quick and easy rewinding of the hose. High efficiency: Eco!efficiency mode – economical and environmentally friendly, even during longer use. Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: Precise detergent dosing with rinse function. Gjdpsw Rz R Dofx Akajug Large tank opening with filling chute. Mobility concept: Jogger principle with large, rubber-tired wheels and a swivel caster. Integrated tipping trough for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: Intuitive operation thanks to a large, single-button selector switch.

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Gusdpfx Akox H S Nwsasg

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm Gsdpex Emviefx Akaeug turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: excellent (used), Year of construction: 2004, operating hours: 98,108 h, clamping force: 1,500 kN, screw diameter: 50 mm, injection weight: 354 g, Engel Victory 750/150 Tech injection molding machine (146) Number: 146 Availability: in stock Year of production: 2004 Producer: Engel Injection molding machine condition: used Screw diameter [mm]: 50 Injection weight [g]: 354 Injection pressure [bar]: 1427, 2500 Closing force [kN]: 1500 Column spacing [mm]: without columns Godpsy Ec D Nsfx Akaoug Plate size [mm]: 750 x 850 Control type: CC 200 Tongue: german Installed power [kW]: 61 Working hours [h]: 98108 Weight [kg]: 9500 Dimensions [mm]: 5700 x 2000 Feed hopper: NO Core string: Yes Robot socket: Yes

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Guedpfx Aohu Sf Hjkaog Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: good (used), Swing diameter over the carriage 225 mm Center height over the bed 260 mm Carriage length 520 mm Carriage width 215 mm Spindle bore 72 mm Chuck diameter 175 mm Spindle diameter in the front bearing 100 mm Drive power 22 kW Gusdpozwpkksfx Akasg Spindle speed 20-4000 rpm Tailstock diameter 80 mm Tailstock travel 100 mm Tailstock arbor MK4 Distance between centers 600 mm Bed width 320 mm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,097 h, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 Gedpfsx D R Hgjx Akaeug • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader • Operating hours: 69246 h • Spindle hours: 23097 h • Tool holder: VDI 40 Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: excellent (used), machine/vehicle number: 5150018, Year of construction: 2010, load capacity: 3,000 kg, lifting height: 3,000 mm, free lift: 744 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,743 mm, power: 12 kW (16.32 HP), battery manufacturer: Votex-Bison / Hoppecke, battery model: 5EPzS 775, battery capacity: 775 Ah, battery voltage: 80 V, battery weight: 1,243 kg, fork carriage width: 950 mm, fork length: 1,390 mm, fork width: 150 mm, fork thickness: 50 mm, ground clearance: 120 mm, turning radius (inner): 1,500 mm, turning radius (outer): 3,000 mm, tire condition: 80 %, front tire size: 355/50-20, overall weight: 8,910 kg, total height: 2,740 mm, total length: 4,210 mm, total width: 2,450 mm, color: traffic orange, Equipment: CE marking, cabin, full service history, head guard, lighting, sideshift, Votex Bison Traffic 3004 – 4-Way Electric Sideloader (3,000 kg / 3 m Lift Height) Robust and precise 4-way electric sideloader designed for handling long or bulky goods in narrow aisles. Equipped with an enclosed operator cabin, multi-directional steering (front, rear, side, and crabwise), and hydraulic sideshift for flexible load positioning. Technical Highlights: • Load capacity: 3,000 kg • Lift height: 3,000 mm (duplex mast) • Overall dimensions (L × W × H): 4,210 × 2,450 × 2,740 mm • Forks: 1,390 × 150 × 50 mm • Electric drive, 80V battery (5EPzS 775, 775Ah, 1,243 kg) • Total weight: 8,910 kg Guodpfx Aksxvpmpeaog • CE-certified – documentation and manuals available Machine is in good condition, ready for immediate operation. Ideal for warehouses, metal or timber handling, and manufacturing environments requiring efficient multi-directional movement.

Condition: used, We offer an industrial meat mixer CARNITECH CT3046 from 2005, designed for intensive mixing of minced meat, meat cubes, poultry, and mixtures with additives. The machine is ideal for meat and poultry processing plants, burger, sausage and ready-made meal production, ensuring even mixing of raw materials and high repeatability of technological processes. The mixer is powered by 3x400V, 50Hz and has a solid, hygienic stainless steel construction, adapted to work in multi-shift mode. The large working chamber and well-thought-out design facilitate the loading and unloading of raw materials, and its compact dimensions allow for easy integration into the existing technological line. Technical data – CARNITECH CT3046 meat mixer: Manufacturer: CARNITECH Model: CT3046 Year of manufacture: 2005 Machine type: Twin Paddle Intermeshing Mixer Capacity: 1700l Item: 2 29 No.: ON2396000 Code: 04266 Power supply: 3×400 V, 50 Hz Gedpfx Ajxzrxrokaeug Machine dimensions (L x W x H): 3900 x 1450 x 2500 mm The CARNITECH CT3046 mixer is an excellent choice for plants looking for an efficient, used meat mixer that will increase production efficiency, improve the quality of stuffing, and streamline the meat product preparation process.

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Feed hopper 3,68 m3 Fitted with overband magnet Side conveyor can be bought. Gujdpfx Aeyazl Hokaog Wear plates 90% blow bars martensitic-ceramic Machine in great working condition, can go straigt to work

Year of construction: 2023, condition: ready for operation (used), Sorting machine (sorter) for fine material, 320 valves, few operating hours, still assembled and can be tested with your material. Guodpfx Akjxmvnbeaeg