Used Cyclop Gl 200-11 ( 3809 ) for sale (29,099)

Condition: ready for operation (used), Fanuc Pulsecoder A20B-2003-0311 for AC servomotor, serial number: 102745, used, in good condition, fully functional, delivery as per photos. Bljdpfx Afjx H Huzo Ajn

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) Bljdpfey Sqrbex Af Asn * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm Blodpfxszimqrj Af Aon The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 Bsdpfx Aezkb Hdjf Aeln - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Year of construction: 2021, operating hours: 2 h, condition: new, functionality: fully functional, machine/vehicle number: 211 02 24, We offer the following for sale: For sale: GLOBAL Vacuum Presses GGTP-P-3116 Professional membrane vacuum press in excellent, like-new condition. The machine has only been used once and is virtually brand new. This equipment is an ideal choice for furniture manufacturing and woodworking applications: perfect for foil lamination, veneering, and precision pressing of curved and flat surfaces. It features a robust design, reliable operation, and uniform pressure distribution. Key features: - Model: GGTP-P-3116 Professional - Working area: approx. 3100 × 1600 mm - Membrane vacuum technology for precise and even pressing - Suitable for applying PVC foil, veneer, and other coatings Bsdey Dhr Njpfx Af Aoln - Sturdy, industrial-grade construction - Easy to operate Serial number: 2110224 Weight: 640 kg Year of manufacture: 2021 Pressure: 9.9 T/m² Power: 1.5 kW Frequency: 50 Hz Phases/Voltage: 3+N / 380 V Current consumption: 2.2 A If you have any questions or require further information, please send us a message or call us. The machine is ready for immediate use, in as-new condition, and can be tested on site.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports Blodpoy T Hd Njfx Af Aen

Condition: new, Siemens 840C 6FC5110-0CB01-0AA0 PLC-CPU135WD SN: T-FO604200, unused in sealed original packaging, 100% functional, delivery as per photos. Bsdpfxsy Nr S Re Af Asln

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Bodpfxegkgwfe Af Asln Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GL0 Permanent Magnet Motor, serial number: MDD093-6062, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bedei D Iv Tspfx Af Ajln

Condition: ready for operation (used), Siemens 1FK6060-6AF71-1EB0 Synchronous servo motor SN:YFNO13866402003 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bedpfxovdzcce Af Asln

Condition: ready for operation (used), Bosch SD-B6.480.020-00.000 servo motor 104-913411 SN: 000066, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bjdpfx Afsu Ayhle Aoln

Condition: new, Siemens 6FX1120-0AA00 PLC card, memory module MS125-B, version 02 – – in open original packaging, 100% functional. Bjdpfoi Ed Nxox Af Aeln

Condition: new, overall weight: 2,000 kg, empty load weight: 1,600 kg, maximum load weight: 400 kg, loading space length: 5,490 mm, loading space width: 2,290 mm, loading space height: 2,120 mm, tire size: 155r13c, Car trailer as a construction trailer for 12 people. The insulated *stay trailer* is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. An electric heater provides support in very cold weather. Self-sufficient thanks to WC in separate room with lockable door and storage room. The use of a crew trailer is possible on any construction site. As a normal *car trailer*, it can be driven to the construction site by a simple car. These vehicles are also used as *burro trailers*. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, extra room with outside door with chemical toilet and sink, storage room with door and shelf, stairs for hanging and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, Refrigerator, coffee machine, connection cable, 230V fuse box with RCD, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, four sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Bledpfxoqwi Nko Af Aon Accessories for construction trailers include a toilet room with toilet, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, Rexroth DBETE-61/200YG24K31F1V pressure relief valve, R901103801FD, unused, 100% functional. Bledpsi Ecrxefx Af Ajn

Condition: new, Siemens 1FK7060-2AF71-1RG1 - Z Synchronous motor SN:YFJ7636918802001, Z= Q31: Metal rating plate instead of adhesive plate, unused in opened original packaging, 100% functional, scope of delivery as per photos Bsdoul Ikxepfx Af Aoln

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw Bjdpfsudvt Rox Af Asln + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: used, Year of construction: 2008, Versch GL 18 Closure for medicinal vial GL18 Bsdpodqbzqofx Af Asln Injection mold with 10-cavity

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Bledpfsuxxxex Af Aen Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Support for measuring stops 3.0m

Condition: as good as new (ex-display), Year of construction: 2015, Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Metal sheets to avoid hanging/sagging Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Bjdpfx Afevzuxfs Asln For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Centrifugal fan, Fan, Exhaust fan, HRV 56N-400/M GL 360, used machine Manufacturer: Venti Oelde Type: HRV 56N-400/M GL 360 Overall dimensions: 1050 × 1120 × 1010 mm Weight: 280 kg Bljdpezwz Tdsfx Af Aen Airflow capacity: 14,400 m³/h Year: 2014 Electrical data: 22 kW, 400 V, 50 Hz, 39 A

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Bsdpozmub Tsfx Af Aoln

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Bljdpfx Afox A Tcus Aon Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Bedpfx Aez Ayq Ejf Aeln

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 160 bar - Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank Quantity: 1 piece available Blodpfxob A I Sxe Af Asn -Weight: 95 kg

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Bodpfjz Ac I Hsx Af Aoln