Used Dea Brown&Sharpe Scirocco 140907 for sale (688)

Condition: excellent (used), Vollmer CANA E: Sharpening machine for circular saw blades. Dodedwbicjpfx Ap Dewc

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds. Dodpfxed Ixbzo Ap Djwc

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm Dwsdstqqk Nepfx Ap Dsc hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: excellent (used), Working range 850 mm 0.12 kW motor Very good condition. Dwedpfsr Ha Ufsx Ap Doc

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Made of stainless steel. Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Dwsdpfxscl Tt Ro Ap Doc Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Condition: used, Sharpening machine CINCINNATI AS Dwjdpfx Apjuhbnbs Djc

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Dsdpfx Apst Etkko Dowc Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm Dwjdpet Hw Nmefx Ap Djc total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: excellent (used), functionality: fully functional, Vollmer sharpening machine for band saws, robust design. Blade width up to 360 mm. 3 switchable tooth profiles. Grinding wheel, 250 mm diameter. Infinitely variable feed drive. Linear feed system. Stable support and guide blocks, height-adjustable. Dwedezmg Dyopfx Ap Djc Machine has been technically inspected and tested.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser Djdpfx Ajzdz S Tsp Dswc - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Mileage: 25.000m² only! Print head status: perfect Dwsdpjylwhnjfx Ap Dec Print area: 3,08x2,50 meters Roll option: not available In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 10 l, NUMATIC HFM 1515 SINGLE DISC SCRUBBER THE MACHINE IS EQUIPPED WITH AN ADDITIONAL 10L WATER TANK. The cleaning head is equipped with a new disc brush and a holder with a set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: 10L WATER TANK NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning very dirty surfaces) (surface) NEW black pad - aggressive (cleaning very dirty surfaces) TENZI NORMAL liquid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is very maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A very clear and intuitive control panel. Dedpfx Aozvu Irjp Dowc

Condition: like new (used), Year of construction: 2024, functionality: fully functional, punching force: 30 t, total height: 2,220 mm, total width: 5,210 mm, total length: 6,050 mm, working range: 2,540 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,540 mm, punching diameter: 25 mm, workpiece weight (max.): 170 kg, overall weight: 15,000 kg, Maximize your sheet metal fabrication efficiency with this heavy-duty, high-precision Baykal BPM-TE 1525x30 CNC Punch Press. Engineered with an ultra-rigid "O" Frame design, this industrial workhorse offers unparalleled stability, minimizing frame deflection even under full-capacity operations. Equipped with premium Rexroth servo motors and linear guides, it delivers blistering speeds up to 900 strokes per minute and up to 1G acceleration—perfect for high-volume production runs and precise part creation. Manufacturer: Baykal Makina Model: BPM-TE 1525X30 Condition: Excellent / Fully Operational (Used) Location: Plovdiv, Bulgaria Availability: Immediate Technical Specifications Punching Force: 30 Tons (300 kN) Working Range (X x Y): 2540 mm x 1540 mm (Without repositioning) Maximum Sheet Thickness: 6.4 mm Maximum Workpiece Weight: 170 kg Maximum Punching Rate: 900 hits/min (1mm pitch nibbling) / 360 hits/min (25mm pitch nibbling) Turret Capacity: 12 Stations Indexable Stations: 3 x Indexable "D" Stations Maximum Punching Diameter: 88.9 mm Axes Layout: X, Y, Z, C1, C2, T Positioning Accuracy: ± 0.1 mm Repeatability: ± 0.04 mm Combined Axis Speed (X+Y): 128 m/min Key Features & Machine Benefits Dwjdpszcb Exjfx Ap Doc Finite Element Analysis (FEA) Optimized Frame: The stress-relieved, normalized O-frame ensures structural integrity, flawless punching accuracy, and a prolonged tooling life. Advanced CNC Control Unit: Powered by an ergonomic, free-standing Bosch MTX CNC control system with a 15.6" TFT Windows screen for simple programming and high machine availability. Smart Nesting Software: Includes Lantek Sharp Punch software for offline programming, automatic nesting, and fast DXF file importing to drastically reduce material waste. Material Protection Table: Features a smart combination of a moving table with ball transfers and brushes to prevent scratching on delicate sheet surfaces. Heavy-Duty Work Clamping: Fitted with pneumatically operated sheet clamps featuring a sliding system and sensors to eliminate material slippage and prevent sheet jamming. Integrated Production Aids: Built-in work chute with a mobile storage box for small parts collection, automatic lubrication system, and waste collection box. Safety Features: CE certified, equipped with warning lamps and light barrier safety curtains.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout Djdszk Nmrspfx Ap Dswc - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, mileage: 3,17,111 km, power: 115 kW (156.36 HP), first registration: 11/1992, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, gearing type: mechanical, number of seats: 2, Year of construction: 1992, Number of doors: 2 Number of cylinders: 6 Dwedpfxouu T Nrj Ap Dec Unladen weight: 6,500 kg Interior: brown Number of keys: 2

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor. Djdpfx Aszhlmiep Djwc  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: excellent (used), mileage: 3,25,653 km, power: 100 kW (135.96 HP), first registration: 12/2010, fuel type: diesel, tire size: 215/75 R16, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro3, suspension: steel, number of seats: 3, total length: 7,770 mm, total width: 2,350 mm, permissible axle load (axle 1): 2,300 kg, permissible axle load (axle 2): 4,300 kg, loading space length: 5,700 mm, loading space width: 2,350 mm, Year of construction: 2010, Equipment: electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - Beacon(s) - Radio CD player - Towbar 3500kg - Work lamp(s) = Remarks = Superstructure Construction year: 2010 = More information = General information Number of doors: 2 Cab: Vario, single Registration number: BX-TL-36 Technical information Number of cylinders: 4 Djdpfjzf Ivnjx Ap Dowc Engine capacity: 4.249 cc Drivetrain Make of engine: Mercedes-Benz Axle configuration Tyre size: 215/75 R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 2300 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Max. axle load: 4300 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Weights Empty weight: 3.790 kg Carrying capacity: 2.200 kg GVW: 5.990 kg Max. towing weight: 13.000 kg Functional Make of bodywork: Tijhof Height of cargo floor: 85 cm Extendable superstructure: Yes Maintenance APK (MOT): tested until 02/2027 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, continuous grilling line suitable for: roasting, cooking or browning electric heating 108 kW 3 x 400 V with lower and upper belt : bottom and top grilling overall dimensions (l x w x h) : ± 5.150 x 1.800 x 2.250 mm net length 2.900 mm belt width 600 mm max 265 degrees gap height adjustable adjustable speed pneumatically controlled belt with belt wash system Dwedpezzwlkofx Ap Dec

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. It has always been operated with cooled oil and cleaned with a COMAT machine. Dwsdpfx Aszwhuhep Doc Operating speed [mm/s] 0.5–20 mm/s Saw blade diameter [mm] 80–500 mm

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Dwodjhq A Txjpfx Ap Dsc Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, functionality: fully functional, input voltage: 400 V, planing width: 310 mm, number of blades: 30, rotational speed (max.): 4,000 rpm, total length of planing tables: 1,300 mm, overall weight: 180 kg, Equipment: CE marking, Application of a helical cutterhead with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional straight knife cutterhead. The advantage of carbide inserts is that, in case of damage, individual knives can be replaced or rotated, which significantly reduces operating costs. The carbide-tipped blades provide tear-free planing and optimal smoothness with every type of wood. Quick and hassle-free folding tables allow fast conversion to thicknessing mode. Integrated, tiltable chip extraction device - connection diameter 100 mm. Both tables are equipped with precision adjustment systems and noise-reducing covers. The planer table is centrally mounted on the guide column with a support bracket. Stable fence with prismatic guide, tiltable from 90° to 45°. Tables are made of cast iron with polished work surfaces. Cutterhead guard included. Technical Specification Voltage: 400 V Dimensions (W x D x H): 1300 x 900 x 1180 mm Weight approx.: 180 kg Planer Planing width: 310 mm Cutterhead speed: 4000 rpm Working height: 990 mm Number of knives/inserts: 30 pieces Cutterhead diameter: 75 mm Planing fence: 1110 x 130 mm Fence tilting range: 90° - 45° Max. chip removal in planer: 5 mm Planer table length: 1300 mm Thicknesser Thicknesser table length: 600 mm Thicknesser planing width: 305 mm Minimum workpiece height: 5 mm Maximum workpiece height: 180 mm Max. chip removal in thicknesser: 2.5 mm Feed speed: 8 m/min Dust extraction port diameter: 100 mm Motor power: 3 kW Motor power S1 100%: 2.2 kW Dwodeyt I H Dopfx Ap Djc

Condition: excellent (used), first registration: 07/2018, total length: 4,000 mm, total width: 2,550 mm, wheelbase: 2,220 mm, color: other, Year of construction: 2018, Superstructure Fifth wheel height: 125 cm = More information = Empty weight: 2.280 kg Carrying capacity: 25.720 kg GVW: 28.000 kg APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good Registration number: 20-04-ZZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data Djdpfx Asx A Hchsp Dowc We can also arrange financing for you within the Netherlands.

Condition: excellent (used), mileage: 9,94,522 km, power: 338 kW (459.55 HP), first registration: 07/2011, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,000 mm, total width: 2,500 mm, total height: 3,600 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,500 mm, Year of construction: 2011, Equipment: differential lock, General information Cab: Spacecab, single Registration number: BZ-HT-71 Dwsdpfey Rtrusx Ap Dsc Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Drivetrain Make of engine: DAF Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Rear axle 2: Tyre size: 315/70 R22.5; Double wheels; Max. axle load: 7500 kg; Steering; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Weights Empty weight: 11.610 kg Carrying capacity: 16.388 kg GVW: 28.000 kg Functional Tipper: Back Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: good (used), Storage location: 3137 Manufacturer: Königsee Year of manufacture: 1984 Machine number: 012/84 Type / Model: SWSK 400 Control: conventional Saw blade diameter: 20 to 400 mm Grinding wheel diameter: max. 200 mm Grinding wheel width: Grinding wheel bore: Tooth pitch: up to 24 Number of teeth: Spindle speed: 3,340 / 4,175 rpm Power connection: 2 kW Accessories/Equipment: Condition: good Weight: 0.5 t Dedpfx Apezx D T Ns Djwc Dimensions: 600 x 700 x 1,200 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, total length: 4,412 mm, Equipment: documentation/manual, We are offering this like-new Format4 tempora F600 60.06L edge banding machine, manufactured in 2021. It features sharp pre-milling cutters, AdvantEdge zero-joint technology, X Motion PLUS control system, interchangeable glue tank, a 2-motor corner rounding unit, spraying system, polishing unit, etc. The 'Nesting' package also ensures that banding can be applied along pre-drilled holes and other cutouts. This is a very complete and well-maintained machine in excellent condition. It is being sold due to a change in business activities. The machine can be inspected while in operation. Manufacturer: Format4 Model: tempora F600 60.06L Year of manufacture: 2021 Condition: like new Category ID: 877 Type ID: 664 Machine type: edge banding machine Dwedezt Dkkopfx Ap Dsc If you have any questions or would like more information, please feel free to send us a message or call us.