Used Denver 3-Axis Cnc Glass Processing Center for sale (84,758)

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Fpjdpfx Aob Tmpqjg Ajh Air supply 6 bar / 470 l/min consumption.

Condition: new, Year of construction: 2024, pipe diameter (max.): 38 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, total length: 4,280 mm, total width: 1,000 mm, total height: 1,500 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, STANDARD EQUIPMENT • 3 Sets of Dies – (1 set of rolling die with 2 sets of bending dies, or 3 sets of bending dies in requested sizes) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feeding Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H, V Axes • Mobile CNC Control Unit with 21” TFT Touchscreen • Rolling function • 3D bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Working Material Length • Calculation of Estimated Bending Time • Conversion from X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop • Remote Assistance • Mandrel Bending – With or Without Mandrel • Safety Plate at Back of Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slider System • Hydraulic Claw Collet • Electrical Panel Safety Lock and Keyed Panel Lock • Electrical System Cooler • Overload Protection • Detailed Operating Report Automatically Sent by E-mail OPTIONAL EQUIPMENT (Not included in the price) • Extra Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Extra Mandrel Length (up to 6 m) – per meter Fpsdpou Hkb Djfx Ag Ash • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable pipe diameters) • Hydraulic Oil Cooler TECHNICAL SPECIFICATIONS CAPACITY MB-38 CNC/ 5 AXIS Max. Capacity mm Ø38x3 mm Max. Bending Radius mm 250 mm Max. Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerance ±0.1 Bending Speed kW Adjustable LxWxH mm 5500x1300x1600 Weight kg 2250

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards Fodpfey Dpgnsx Ag Ajph  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Fedpfx Aexdc T Sog Asph

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Fjdpfx Agsy D E Rio Aoph Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Fpjdpfsxddk Sjx Ag Ash Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts. Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Product Function: Fpsdpfx Ajxu Uhvsg Ajh The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 460 mm, controller model: HEIDENHAIN ITNC 530, spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Number of axes: 5 Travel range, X-axis: 450 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 460 mm Swivel angle (A-axis): -10 / +110 ° Tool magazine Fedjzaqhqopfx Ag Asph Number of positions: 60 Maximum tool diameter: 80 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool holder and spindle Tool holder: HSK 63 Minimum spindle speed: 2 rpm Maximum spindle speed: 28,000 rpm MACHINE DETAILS Operating time according to counter: 94,552 h Operating hours according to counter: 24,219 h Connection voltage: 400 V Spindle power: 38 / 28 kW Total power consumption: 70 kVA Dimensions & Weight Dimensions (L x W x H): 3,210 x 2,930 x 2,900 mm Machine weight: approx. 9,500 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Fpodpfx Agszcpwco Ajh Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Fjdpfx Ageza Alhj Aoph Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system Fpodpfx Aoyr Acksg Ash UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts Fjdjzb Ufvepfx Ag Asph ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: good (used), Year of construction: 1989, TITAN SC16.000 | 16-Metre Heavy-Duty CNC Vertical Turning Lathe One of the largest vertical turning lathes available on the market — the TITAN SC16.000 is built for the most extreme heavy machining tasks in energy, mining, shipbuilding, and defense industries. EXCEPTIONAL CAPACITY: • Faceplate Diameter: 12,000 mm • Max. Turning Diameter: 16,000 mm • Max. Workpiece Height: 6,000 mm • Max. Workpiece Weight: 400 TONNES CNC & FEATURES: • Full CNC control system • C-Axis available — for milling and complex contouring • Engineered for continuous heavy-duty production IDEAL APPLICATIONS: • Wind turbine bases and flanges • Large ship propellers and stern frames • Mining drum bodies • Hydro turbine runners • Nuclear & power generation components • Large pressure vessel heads WHY THIS MACHINE? ✔ Extremely rare — machines of this size are very difficult to find ✔ Fully functional — available for inspection under power ✔ CNC control for modern precision requirements Fpedpfjf Utqmjx Ag Ash ✔ Export possible — experienced in international logistics for oversized equipment Manufacturer: TITAN | Location: REM Bacau, Romania Contact us immediately — this machine will not last long. Full inspection welcomed.

Year of construction: 2024, operating hours: 30 h, condition: like new (used), functionality: fully functional, Brand: DN Solutions Model: Lynx 2100LC Type: CNC lathe Chuck Size: 10 inch Max Turning Diameter: Ø350 mm Max Turning Length: 537 mm Bar Capacity: Ø81 mm X/Z Axis Travel: 205 / 560 mm Rapid Traverse X/Z: 30 / 36 m/min Spindle Speed: 3,500 rpm Spindle Power: 18.5 / 15 kW Spindle Nose: A2-8 Turret: 12 station Fsdey U Dpfopfx Ag Asph Tool Size: 25 × 25 mm Control Unit: FANUC i Series Tailstock: MT#4 Machine Weight: Approx. 3,450 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Number of controlled axes: 4, digital Axis X travel (longitudinal): 6500 mm Fpodpfxezczwuj Ag Aeh Axis Y travel (transversal): 1095 mm Axis Z travel (vertical): 800 mm Axis A rotation (vertical rotation): 0° to 180°, continuous Maximum axis X speed: 80 m/min Maximum axis Y, Z speed: 64 m/min Maximum axis A speed: 10,000 °/min Electric spindle power in S1: 7.5 kW, 20,000 Maximum electric spindle speed with standard HSK-F Configurable, independent work areas on the axis 9-position tool changer Jaw positioning Number of standard stops: 4

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station Fpsdpoxt Uqhefx Ag Aoh - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Fedpfxezcpplo Ag Asph Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 895 mm A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Tool changer: 46 positions Spindle speed: 24,000 rpm Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Fpjdpfxezclk So Ag Aoh Weight: 12,500 kg Includes coolant system, 40 bar Includes documentation

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump Fjdpoun Rqgofx Ag Aeph HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Fjdpezat Tvefx Ag Aeph Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available Fpodjw Hg Nljpfx Ag Aeh * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Fpodpeygn Ibjfx Ag Ash Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Fpedevw Upcepfx Ag Aeh Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Fpsdev N Di Ajpfx Ag Ash Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Fpodpfx Aoqqivvsg Ajh Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted