Used Deufra Actuator for sale (551)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Godpfjy Tvuwox Aatskb Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Gedpfxozdy Iao Aatekb Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servomotor -Valve drive, continuous control signal, position feedback -Type: Siemens SKC60 -steady input signal -Maintenance-free electro-hydraulics Gsdeb H Ebkepfx Aatokb -Hand adjustment and position indicator Technical specifications: -Runtime (control mode): open 120 s, close 20 s -Nominal stroke: 40 mm -Adjusting force: 2800 N -Operating voltage: AC 24 V -Power consumption: 24 VA/18 W -Control type: DC 0...10 V, DC 4...20 mA, 0...100 Ohm -Weight 10 kg -Number: 1 pieces available -Price: per piece

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational Gksdpjx Sw Uvofx Aatob lots of accessories

Condition: like new (used), Year of construction: 2017, UC MONOBLOCK D.0015 Automatic dosing/closing Machine. Monoblock bottle filling/capping machine for the cosmetic industry. Equipped with 4 filling nozzles by cylinders and 1 vacuum-actuated nozzle for equalizing the product in all containers. Gedpewr Dzijfx Aatekb Double capping head (pick and place) and vibrating ramp for valve insertion. Filling and vacuum pumps. Production 6000 b/h Filling capacity up to 250 ml Voltage 380-400 VAC + N Power 2.2 Kw With complete documentation and CE

Condition: used, Year of construction: 2002, Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE  produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency and Production Cycle The HDPE Blow Molding Machine TECHNE achives a nominal production rate of 1690 bottles per hour (bph). The production cycle time is approximately 16 seconds. Consequently, this machine produces 40,560 bottles daily and 13,141,440 bottles annually, based on 324 working days per year. Therefore, the Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph suits large-scale operations perfectly. Detailed Technical Specifications The machine consists of a single station with extruders of diameters 70 mm/25D, 80 mm/25D, and 60 mm/25D, providing a total output capacity of approximately 320 kg/h. Moreover, DC motors drive the extruders, offering respective power ratings of 33 kW, 41 kW, and 24 kW. The total installed power of the machine is 240 kWh, with an average consumption of 80 kWh. Additionally, the mold’s clamping force is 300 KN, ensuring precise and uniform mold closure. Controls and Cutting System of the HDPE Blow Molding Machine TECHNE The control panel allows you to configure and monitor process parameters, including alarm systems. In addition, the machine uses a cold blade parison cutting system and a pneumatic system for bottle pick-and-place. Multiple cylinders control the parison thickness in a closed-loop position cycle, allowing for independent control of the parison profile for each cavity. Post-Overhaul Performance In 2013, technicians overhauled the machine, installing a new B&R PLC to enhance performance and reliability. The mold closing mechanism uses levers and hydraulic actuators, strategically positioned to ensure perfect distribution of clamping force. Similarly, upper and lower deflashing occurs through a single pneumatic actuator. Conclusion of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE efficiently produces high-quality HDPE containers. Its technical specifications and advanced technologies make it an excellent choice for companies requiring high production capacities and long-term reliability. Gjdjvgvqgepfx Aatekb

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Gjdpexhfcdefx Aatekb Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: Gedpfxeywuiho Aatjkb - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: used, power: 78 kW (106.05 HP), first registration: 12/2025, fuel type: gasoline, axle configuration: 4x2, color: white, gearing type: mechanical, suspension: steel, Leaf spring suspension, UNIQUE UNIT - ZERO-MILE VEHICLE - REGISTERED 12/17/2025 - SHORT RANGE LPG (15L) - DUAL REAR WHEEL - WHEELBASE 3250mm - OPTIMIZED PAYLOAD 550 Kg - WHITE COLOR - REAR TIPPER BODY: 2300x1800mm - PM 2821 CRANE - TOP EQUIPMENT: DAB radio, Manual air conditioning, Electrically heated, folding, and adjustable exterior mirrors, Passenger airbag, Body-colored front bumper, Fog lights - VEHICLE AVAILABLE SUBJECT TO PRIOR SALE - TIPPER BODY FEATURES: - Chiarvesio-built rear tipper body, 2300x1800 mm (external dimensions) - L-shaped sideboards, 400 mm high, with 180-degree lateral opening, and rear opening from below/above - 30/10 sheet metal floor - 01 front pole holder - 01 galvanized 400mm tool box - Fenders - 1+1 winches - rear light grilles CRANE FEATURES: - model PM 2821 - 02 manually extendable stabilizers - 01 hydraulic extension - 02 additional actuators - bilateral 6-element controls - 01 swivel hook - 200 rotation buffers (the crane does not operate above the cab) Gedpfozf Sbujx Aatskb

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence Godpjxdl Raofx Aatekb - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: good (used), rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX Gedocnkwajpfx Aatjkb -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Year of construction: 1990, operating hours: 443 h, condition: used, 1990 | Extec 5000 | Used Screen | 443 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 43 approved ✅ 5 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the screen. The engine compartment protective covers are not mounted; however, the seller has them and they will be included in the sale. The tensioning and folding cylinder of the walls do not work. No presence of stabilizer. The condition of the belts is good, some appear dry and the connections are sometimes damaged. Wear on the Matic tires is significant. Engine starts with a booster. The electrical part does not work. Presence of seepage on an actuation valve for movements. The paint is damaged in some areas. The exhaust outlet is not secured. The starting battery is out of service. 📄 Want to see the full inspection, extra photos, or a video? Gsdpoyambgefx Aatokb Tip: The reference "40008 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function Gkodpfxjy Apdqo Aateb \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Gkjdpfxjyltvbj Aatob Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 04/2026, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, Vehicle number: 540038 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera Gjdpfxox Egtfe Aatekb ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5,000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 04/2026, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, Vehicle number: 540038 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5,000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km Gkjdpfxex Egr Us Aatjb * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,900 kg, Year of construction: 2018, operating hours: 6,000 h, drive type: All wheel drive, machine/vehicle number: MAN00000A00773607, Manitou MRT2550+ – Series PRIVILEGE ST4 S2 Special wheeled telescopic boom handler Year of manufacture: 2018 Unladen weight: 18,900 kg Drive type: All-wheel drive Total axles: 2 Braked axles (service brake): 0 Length: 7,740 mm Width: 2,490 mm Height: 3,040 mm Rated capacity: 4,999 kg Nominal load: 4,999 kg Load at radius – min / max: 4,999 kg / 300 kg Drag force: 9,000 daN Max lifting height: 24.5 m Working radius – min / max: 5.1 m / 18.5 m Gkedezyag Ijpfx Aatob Actuation type: Electrohydraulic Max persons on platform + materials: 3 persons + materials Engine type: OM 934 LA.E4-5 Power: 115 kW Displacement: 5,132 cm³ Fuel type: Diesel Included attachments: Personnel basket, winch, jib beam, forks

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h). Godjkyrmijpfx Aatokb Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,500 kg, gearing type: mechanical, number of seats: 2, loading space length: 4,200 mm, Equipment: ABS, air conditioning, soot filter, Vehicle number: 540075 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker Gedpfx Asx Egr Isatjkb * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Gksdpfezy Rw Rsx Aateb Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray Gsdeznmfaopfx Aatekb feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Gkodpfoyl Izxox Aatjb Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Condition: used, mileage: 5,71,209 km, power: 330 kW (448.67 HP), first registration: 05/2021, fuel type: diesel, empty load weight: 7,980 kg, maximum load weight: 11,020 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 05/2027, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, low noise, onboard computer, parking heater, Unladen weight: 7980 kg, permissible total weight: 19000 kg, seats: fabric, interior color: gray, air suspension, tachograph, adjustable fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), auxiliary air conditioning, adaptive cruise control (ACC), comfort seats, driver's seat with air suspension, armrests for driver/passenger, seat heating, LED headlights, radio, audio interface, lane keeping assist, leather steering wheel, electric windows, outside temperature display, roof spoiler, electric exterior mirrors, curb mirrors, wide-angle mirrors, central locking, sun visor, cooler box, hill start assist, daytime running lights, cup holders, information and service system, speed limiter, emergency braking assistant, storage compartment, lower bunk, adjustable fifth wheel coupling / HUB COUPLING. All maintenance has been carried out by DAF and is recorded in the DAF maintenance system. A new VTG actuator has already been installed. Vehicle location: 01471 Radeburg. Errors and changes excepted. Gkjdozax Swjpfx Aatjb

Condition: used, mileage: 14,512 km, power: 250 kW (339.91 HP), first registration: 11/2015, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro5, total length: 7,260 mm, total width: 2,500 mm, total height: 3,260 mm, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, compressor, electronic stability program (ESP), had accident, soot filter, MAN TGM 18.340 4x4 automatic, 250 kW/340 hp, with selectable all-wheel drive and locking differentials in the front and rear axles - GIMAEX TLF 4000 fire engine. Chassis equipment: * R134A air conditioning with automatic temperature control * Single tires 395/85 R 20 on split-rim wheel 10.00 x 20 * 4x4 all-wheel drive - front axle selectable * Differential lock in the front axle with buzzer * Differential lock in the rear axle * Wading depth up to 650 mm * Wheelbase 3600 mm * Rear overhang 1775 mm * 12-speed automatic transmission ZF 12 AS 1210 OD MAN TipMatic (ZF 5 HP 592C i=3.43-0.83) with retarder * Auxiliary drive with flange on the right * Transmission software for off-road use (Tipmatic OFFROAD) * Suspension: leaf spring/leaf spring * Permissible total weight 18 t, rear suspension: parabolic spring 11.5 t * Hydraulic power steering * Axle ratio i=6.00 * Oil pan for climbing ability up to 30% * Comfort electrical package for the cab * Painted front bumper * Engine brake with additional actuation via the brake pedal * Rear crossmember for trailer coupling * Quick start system for special vehicles * Multifunction display in the cab * Cab rear wall without window * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors on the left and right, heated and electrically adjustable * Curb mirror on the right, heated and electrically adjustable * Blind spot camera on the right * Additional long-range and fog lights * MAN CD 24V radio * MAN Tronic * Cruise control * Electrically operated door window lifts for driver and passenger * Central locking * Passenger comfort seat for 2 people (individual seats) * Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating * ABS * Drum brakes front and rear * Parking brake on the front axle * MAN BrakeMatic * Steering wheel adjustable in height and inclination Superstructure: * GIMAEX TLF 4000 * Superstructure: modular "AluPrime" construction with roller shutter system, divided into a front equipment compartment module, a water/foam agent tank, and a rear pump module * Fire extinguishing agent supply: * 5000 liters of water * 200 liters of Class A foam Gkjdpfezgp H Dex Aatjb * 300 liters of Class B foam * Firefighting equipment: One Seven System: OS C3-111 * Roof monitor: Rockett GF 5 RF mounted on ALCO extension * Built-in pump: Gimaex FPN 10-2000 EN 1028-1 * Operation via CAN bus control * Quick-attack hose reel: S25/50m Ready-to-use vehicle with accident damage, see pictures, cab only slightly damaged on the roof (roof panel is screwed on and can be replaced), engine/axles/transmission not damaged, vehicle starts and runs normally! Fixed price! Errors and changes excepted!

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing. Gedpfx Aeyl It Isatskb