Used Dhe Direct Heating for sale (18,743)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Lsdpfx Ajylv Iysbyohl Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Automatic restart after power outage

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: Ljdpfx Asrr Smlebyshl - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Lsdpfsxqzmwjx Abyjhl Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm Lhsdpfx Abezc E A Ieyel EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, mileage: 1,10,100 km, power: 66 kW (89.73 HP), color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice, we ask that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: BA2 Brake assistant, BB0 Braking system with ABS and ASR, BB3 Electronic Stability Program (ESP), CL3 Leather steering wheel, CM1 Side rubbing strips, E07 Hill-start assist, E33 Battery management, EK2 Radio, F61 Interior mirror, F68 Heated and electrically adjustable exterior mirrors, F88 Flat blade windshield wipers, FE6 Front electric windows, driver's side with convenience control, FF5 Storage compartment above the windshield, FG1 Armrest with storage compartment, FQ3 Glove compartment, passenger side, closed, FZ1 Central locking with remote control, GK5 5-speed manual transmission, H00 Warm air duct to the passenger compartment, H06 Air conditioning, H15 Seat heating for passenger, H16 Seat heating for driver, H22 Heated rear window, HF2 Pollen filter, I5H Front seat belts with height adjustment, I5K Folding grille for rear seat bench, I5L Seat cover type "fabric", I5Y With front seat heating, I6C Instrument cluster language: German, I6I With seat belt for center seat in the rear, I7H With B-pillar trim, I7J Standard map data, I7L Locking fuel filler cap, I7P Lightly tinted glazing, IN8 Wheelbase 3081 mm, J10 Speedometer km/h, J44 Reversing assist, J47 Trip computer, J58 Seat belt warning for driver's seat, J65 Outside temperature display, JA5 Light and rain sensor, JI6 Start-up distance, maintenance interval 40,000 km, KA1 Particulate filter, L04 Daytime running lights, automatic, L44 Direction indicator lights on the front sides, L67 Trunk lighting, MB6 Emission class Euro 6b M/N1 GR. II, MG9 Generator management, MJ7 ECO Start-Stop function, MO2 Engine OM 607 DE 15 LA 66 kW (90 hp), MS1 Cruise control, MZ0 BlueEFFICIENCY, R87 Spare wheel, S34 Headrests for passenger compartment seats, SA5 Airbag driver, SA6 Airbag passenger, SD0 Child seat attachment ISOFIX, SL1 Passenger seat, SL3 Driver's seat, height adjustable, T16 Sliding door, right, T19 Sliding door, left, U76 Rear bench seat FOLD & LOAD with cargo protection grille, V23 Interior trim, high-quality version, V29 Plastic floor, trunk / cargo area, VC9 Lashing eyes, side wall, VH5 Fabric Lima black, W16 Window, front left, fixed in the side wall / sliding door, W17 Window, front right, fixed in the side wall / sliding door, W27 Window, fixed rear left, W28 Window, fixed rear right, W50 Rear door, two-wing 180 degrees without window, W78 Window in tailgate with wiper and washer system We will gladly provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will gladly provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewings only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, Particulate filter, New inspection, Partition = Further information = Lhedjzz E Hpopfx Abysl Intended use: Goods transport Engine displacement: 1,461 cc GVWR: 2,200 kg Engine brand: Diesel Please contact Tobias Ebert for more information.

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Lhedpfxjyapyrs Abyol Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: used, Year of construction: 2017, operating hours: 6,575 h, load capacity: 3,500 kg, lifting height: 5,190 mm, free lift: 1,640 mm, mast type: triplex, construction height: 2,350 mm, fork carriage width: 1,150 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Ljdpfou D S Akex Abyehl Condition: Reconditioned without warranty Technical condition: good Battery Volt: 80V Battery Ah: 700Ah Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Inspection possible by arrangement. Our general terms and conditions apply. Fork positioner, sideshift, 4th valve, Blue Spot rear, front combination light, reversing light, front and rear working lights, full cab, heating, heated rear window, front and rear wiper, display, panoramic mirror, key switch, fly net on roof, direction switch on steering wheel and mechanical levers, horn, mechanical parking brake, front and rear SE white tires, heated MSG75G/521/24V fabric seat, sun visor

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 machining center - used Throughfeed processing, 4-sided profiling possible, integrated vacuum pump, automatic vacuum positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, central lubrication system, automatic ----- Technical Data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: CAMPUS HOPS, main spindle motor power: 6.5 kW, main spindle speed: 1,000 - 18,000 rpm, main spindle mounting: HSK-F63, drilling unit motor power: 1.7 kW, drilling spindle mounting: M10, interference fit 11 mm, number of vertical drilling spindles: 13 pcs., no. of horizontal double drilling spindles in X direction: 2 pcs., no. of horizontal double drilling spindles in Y direction: 1 pc., saw blade diameter of saw unit: 120 mm, number of tools in tool changer: 6 pcs., extraction connection diameter: 2 x 120 mm + 1 x 140 mm, required volume flow: 4,100 m³/h, required static negative pressure: 2,500 - 3,000 Pa, required air velocity: 30 m/s, compressed air connection: 6 bar, compressed air consumption: 300 l/min. Ljdpfsyrp Srsx Abyshl Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Lhjdjz Ebznjpfx Abyjl and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Neptun LV 1600, a 1600mm vertical glass washing and drying machine. Working direction: from right to left Lhedpfx Abjzd Ax Uoysl Maximum washable glass height: 1600mm Number of brushes: 4 (not suitable for low-e glass) Drying fan Stainless steel housing Water heating Backlighting Stop sensor The machine is in used condition as shown in the pictures and can be inspected at our premises.

Condition: used, mileage: 33,825 km, power: 90 kW (122.37 HP), first registration: 03/2000, overall weight: 7,490 kg, fuel type: diesel, color: beige, gearing type: mechanical, loading space width: 2,440 mm, loading space length: 4,180 mm, loading space height: 1,800 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, parking heater, Very good condition, directly from disaster control service, regularly maintained, no rust, immediately ready for operation. Large long-distance driver's cab 2 with roof hatch / 2+4 seats with seatbelts, optionally with sleeping berth. Rear axle differential lock. Engine type/design/cycle: OM 904 LA, 4-stroke diesel engine with turbocharging and intercooler, direct injection, 90 (122) kW (hp) at 2300 rpm, 4249 cm³. Transmission: 6-speed manual gearbox. Braking system: Dual-circuit air brake system with ABS, spring-loaded parking brake acting on rear wheels, engine brake. Wheels: 6x 225 / 75 R 17.5 M+S, 1. 6.5 bar 2. 4.75 bar Electrical system: 24V, onboard voltage 12V Maximum speed: 109 km/h (documents), 115-120 km/h (speedometer), no tachograph Turning circle: 13.7 m Weights and capacities (kg): * Gross vehicle weight: 7490 * Unladen weight: 4555 * Payload: 2935 * Axle load, unladen / max: 1. 2500 / 3300 2. 1900 / 4900 * Trailer load unbraked: 1500 * Trailer load with overrun brake: 3500, with continuous brake system: 7500 Dimensions (mm or O): L: 6505, W: 2500, H: 3200 Wheelbase: 3700 Approach angle: front: 23°, rear: 17° Loading platform height: 1127 Coupling height: 670 Drawbar coupling, type: Rockinger, Ringfeder G 135 Trailer socket/type/voltage: 12 V, 13-pin, with adapter 7-pin 24 V, 15-pin Brake connections: two-line braking system Vertical load: 400 kg Warm air heating Type/model: Eberspächer D1LC, Heat output: 850 – 1800 W, adjustable Lsdsx Hq Tbopfx Abyjhl Tank: 125L + mounting bracket for 2x20L canisters Price incl. new TÜV/general inspection +++ Subject to errors, changes, and prior sale.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Ljdpox Altfsfx Abyjhl Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: Lodpjy H Akrjfx Abyshl The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs Ledpfx Abjx D E Dyoyehl • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 10,500 h, power: 308 kW (418.76 HP), motor manufacturer: Mercedes, gearing type: other, maximum speed: 50 km/h, first registration: 08/2026, next inspection (TÜV): 08/2026, color: green, overall weight: 18,000 kg, front tire size: 710/75 R42, rear tire size: 710/75 R42, total height: 3,941 mm, total length: 7,593 mm, machine/vehicle number: WCLT7830078300894, Equipment: additional headlights, air conditioning, cabin, front power take-off, front-end loader, hydraulics, lighting, Engine Mercedes-Benz, 6-cylinder, Tier 4 Final, 10,600 cm³ Rated power / maximum power according to 97/68/EC 308 kW / 419 hp Maximum torque 2,100 Nm Diesel fuel tank 740 L AdBlue tank 90 L ⸻ Transmission 50 km/h ZF ECCOM 4.5 stepless transmission ⸻ Hydraulics Load-sensing pump with 120 L oil tank, 195 L/min 4 hydraulic control valves, 105 L/min from the hydraulic valves Direct hydraulic connection from pump to control valves plus pressure-free return line ⸻ Cabin XERION TRAC VC rotating cabin Mechanical cabin suspension Air seat with heating and seat belt ⸻ Electrical system TELEMATICS Advanced 1-year licence Remote diagnostics 5-year licence Communication module: UMTS ⸻ Rear linkage and PTO Rear PTO 1,000 rpm 1 3/4”, D = 45 mm, 20 splines ⸻ Additional equipment Work lights: 6 front and 8 rear Wide vehicle equipment up to 3.0 m Technical documentation 2-line air brakes ⸻ Tyres 710/75 R42 175D, 172E Trelleborg ⸻ Other Standard ignition keys ⸻ Technical data and maintenance Length: 7,593 mm Height: 3,791 to 3,941 mm Wheelbase: 3,600 mm Ljdpfjzdr Eqox Abyjhl

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt Lhjdpfx Aot Tqy Ejbysl break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Lsdeztrpzopfx Abyshl Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), functionality: fully functional, Vacuum Mixing and Marinating The Vakona ESK vacuum mixer processes meat, poultry, and fish under vacuum. It allows for mixing, massaging, marinating, and tumbling products in a single tank. As such, it is suitable for meat processing plants, processing workshops, and manufacturers of prepared meat products. In particular, it helps to distribute marinades, brines, spices, and other ingredients evenly around the products. The system can process whole pieces or cut products. In addition, the tank performs a controlled movement during the cycle. Depending on the tool installed, the machine performs a gentle mix or a more vigorous massage. Therefore, the operator can adapt the process to the desired texture and the fragility of the raw materials. How does the VAKONA ESK work? Lodpfx Aozpw S Tobyehl First, the operator loads the products and ingredients into the tank. Then, the pump removes air to create the programmed vacuum level. The arm then moves the materials regularly throughout the duration of the cycle. The vacuum facilitates contact between the products and the marinade. Thus, it reduces air pockets and improves the distribution of liquids. In addition, the variable speed allows the movement to be adapted to different recipes. The machine can alternate work, pause, and aeration phases to better control the process. Cooling during the process The ESK range combines vacuum processing with a direct cooling system. An exchanger placed around the tank helps to maintain a stable temperature during mixing or marinating. Thus, the machine limits the heating caused by the movement of the products. This temperature control protects the texture of the raw materials. In addition, it promotes a more consistent process between different batches. Therefore, cooling is of particular interest for sensitive recipes and productions that require a controlled temperature. Recipe control and monitoring VAKONA offers a touch control system capable of storing up to 99 programs in the ESK range. The operator can thus record the parameters specific to each recipe. In particular, it can adjust the speed, duration, pauses, vacuum, and aeration phases. In addition, the system can record process data according to HACCP principles. As a result, the company improves the monitoring of production and more easily reproduces the same settings. An automatic water separator also protects the vacuum circuit during operation. Technical specifications: Manufacturer and range: VAKONA ESK STL Functions: vacuum mixing, massaging, marinating, and tumbling Tank volume depending on model: 60 to 1,500 liters Capacity depending on product: 5 to 1,150 kg per cycle Equipment: cooled tank, automatic vacuum pump, touch control with 99 programs and HACCP monitoring SM+EPKZB

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit Lhedpsud H Dmjfx Abysl  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), Ljdpoy Na Rnefx Abyehl - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: used, • Type: W125 • Year of manufacture: 1989 • 2 brushes / water tank, pumps • Running direction: Right to left • Open top Lsdoyucwyepfx Abyshl • Washing brushes 130 cm high • Heating • Price on request

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Ljdpsyvix Ijfx Abyehl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Ljdpezy R Rdofx Abyohl Sale does not include the stainless steel chimney.

Condition: new, -Dimensions: 2000 × 1870 × 1940 mm -New oven, never used, but a showroom model -Serial number: 0054.2015 -Year: 27-04-2024 -MRe Standard range -Energy: wood + electric sole -Capacity: 10 pizzas Ø30 cm -Productivity: 170 pizzas/hour -Electric power: 8.5 kW -Wood power: 35 kW -Combustion air: 173 m³/h -Flue gas temperature: 110 °C -Rotating sole with variable speed -Rotating sole with variable direction -Sole heated by electric resistors Lhjdpfx Aszlp Iljbyol -Wood firebox on the left as standard -Wood firebox on the right (optional) -External ash collection drawer -Inteltouch System touchscreen interface -Dual manual / automatic mode -Three programmable cooking programs -Analog thermostat controls (optional) -Sorrentino stone for bread or pizza (upon request) -Exhaust diameter: 250 mm -Mouth width: 650 mm -Net weight: 2250 kg -Key benefits Motorized rotating sole with variable speed and direction to improve cooking uniformity. Electric heating under the sole to enhance the thermal stability of the cooking surface. Capacity of 10 pizzas Ø30 cm, suitable for regular service and peak activity. Lateral wood firebox with door, standard on the left and available on the right as an option. External ash drop and collection drawer to simplify maintenance and preserve cleanliness during cooking. Inteltouch System touchscreen as standard, with automatic / manual operation and programmable cooking programs. Large natural stone shelf to facilitate cooking movements in front of the oven mouth.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm Lhodpfx Abjtwmp Ssyjl - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.