Used Dixi 80 Sld for sale (16,808)

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: DMG ErgoLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm Ledpey Ryyrsfx Aqvjrl • Distance spindle center to table: 150 mm (Motor spindle) / 145 mm (Gear spindle)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Lodpjy R Nnfjfx Aqvsrl Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 1983, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 10,000 mm, For sale: PORĘBA TPK-80/10M universal lathe, year of manufacture 1983, in very good technical condition. Availability: in stock, under power, available for inspection and testing at any time. Standard equipment: Tailstock Coolant pump Tool holder Additional equipment: 1 x Traveling steady 1 x Steady rest 40–400 mm 1 x Steady rest 400–600 mm 1 x 3-jaw self-centering chuck Ø 500 mm Technical specifications: Distance between centers / turning length: 10,000 mm Swing over bed: 800 mm Swing over carriage: 530 mm Swing in gap: 1080 mm Spindle bore: 95 mm Max. workpiece weight: between centers: 6,000 kg between centers + 1 steady rest: 7,500 kg between centers + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: Longitudinal: 0.1 – 12.8 mm/rev Lredpfx Aeyxgm Ujqvjl Cross: 0.05 – 6.4 mm/rev Main motor power: 16/22 kW (1st / 2nd gear) Dimensions: Total length: 12,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 11,200 kg

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via Ljdpfetqqmbsx Aqvorl control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,150 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm Lsdpfxsy Rawdj Aqvjrl · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,550 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm Lsdoy Ravtjpfx Aqvorl · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function Lrodpfxjy H N Iks Aqvsl - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm Ledpfx Aqey H N Hmevsrl weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 50 mm Lsdjy H N Haspfx Aqvsrl 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. Lodpfx Aqoy Rpdtsvorl • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm Lodpor D N Eqsfx Aqvjrl stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Lsdpfx Aexyhhaeqverl Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Platform height: 650mm Platform length: 4000mm Platform width: 2000mm Lrodpfx Aqjyh H Sfovsl Max. loading capacity:60T Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Ledpemb Urdjfx Aqverl Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), profile bending machine Lrodpfx Aswtph Djqvjl

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Lsdovn Svuspfx Aqvorl Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation Lredpfx Aqsy N D E Aevsl - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: good (used), functionality: fully functional, power: 36 kW (48.95 HP), fuel type: diesel, empty load weight: 8,373 kg, Year of construction: 2016, operating hours: 8,974 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, onboard computer, rubber tracks, Mini Excavator WACKER NEUSON EC 80 Year: 2016 According to meter: 8,974 operating hours Lrsdpfjy Hpa Hjx Aqvsl 36.4 kW 8,373 kg - POWERTILT - Hydraulic quick coupler - All hydraulic lines - 3 buckets - Air conditioning - Refueling pump - Reversing camera Immediately ready for use! Original paint! Good tracks! Sales price: €34,500 net Affordable delivery available!

Condition: used, Year of construction: 2001, operating hours: 533 h, Type of fuel: Electric Colour: Grey Empty weight: 12.570 kg Dimensions (LxBxH): 385 x 200 x 330 cm Lifting capacity: 8.000 kg Ledpfoywuyajx Aqverl Lift height: 408 cm Fork dimensions: 2.400 x 2.430 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: T32207.0234 - Operating hours: 533 - Lifting capacity: 8000kg - Lifting height: 4080mm - Overhead clearance: 3300mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 2430mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Midac - Capacity: 1440Ah - Battery voltage: 80V - Battery test result: 61% - Transport dimensions: 3850mm x 2000mm x 3300mm (l x w x h) - Transport weight [kg]: 12570kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 670 mm, turning length: 3,000 mm, turning diameter: 800 mm, From stock! Sinumerik 840D sL - brand new Technical data CNC lathe with slant bed type TOK -80 CNC x 3 (from stock) or 4m, offered after general overhaul : Producer : FUM POREBA - year of overahul final stage of overahul - swing over bed 800 mm - swing over carriage 670 mm - turning length 3000 mm (from stock) or 4000 mm - spindle bore 95 mm - main motor 55 kW - CNC system Siemens - Sinumerik 840 D sl - brand new - tooling system automatic tool turret 12 positions - max. load capacity b.c. 4500 kg - max. load capacity in the chuck 800 kg - number of speed range 2 - range of revolution 4-800 rpm - tailstock quill Ø 180 mm - quill slide out Ø 150 mm - rapid travel in Z and X axis 5000 mm/min - cross travel 410 mm Lredpfx Aogpg I Reqvel - longitudinal travel 3000 / lub 4000 mm - overall dimensions of the lathe for 3 m b.c. H - 2900 mm, W - 2705 mm, L - 8135 - mass of the lathe: 24,000 kg / for 3 m turning length

Condition: used, load capacity: 500 kg, total height: 200 mm, total width: 600 mm, total length: 800 mm, 20,000 Trolleys 80 x 60 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 20 cm 2 fixed and 2 swivel castors Castor diameter 125mm Ledetymgpopfx Aqvorl Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Negotiated price: € 12.00 net from stock Sales price: € 10.00 net from stock for orders of at least 100 pieces Sales price: € 9.00 net from stock for purchase of one truck (924 units) Also available 1500 roll pallets 120 x 80 cm! (Link) Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, load capacity: 500 kg, total height: 200 mm, total width: 800 mm, total length: 1,200 mm, 1500 Rolling pallet 120 x 80 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg tare weight: 15 kg Length: 120 cm Width: 80 cm Height: 20 cm 2 fixed and 2 swivel castors Ledpfx Aotymffsqvorl Castor diameter 125 mm Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Negotiated price: € 39,- net from stock Sales price: € 32.50 net from stock for orders of at least 100 pieces Sales price: € 28.50 net from stock for purchase of one truck (462 units) Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), 20,000 Trolleys 80 x 60 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 22 cm 2 fixed and 2 swivel castors Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Negotiated price: € 17.50 net from stock Sales price: € 13.50 net from stock for orders of at least 100 pieces Selling price: € 9.80 net from stock for purchase of one truck (924 units) Goods are in stock. Transportation and assembly possible on request. Lrjdpetxztbofx Aqvel Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, Year of construction: 2015, operating hours: 1,300 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-80 diesel forklift, year of manufacture: 2015, hours: 1,300h!, previous owner: German Armed Forces, rated lifting capacity: 8,000 kg, lifting height: 4,700 mm, duplex mast, hydraulic sideshift, fork positioner, full cab, fork length 2,400 mm, diesel engine: [80 kW / 109 hp], weight: 13,600 kg, in good condition, ready for immediate use! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, cab Lrodpfjy T Uv Tjx Aqvel = Further information = Lifting capacity: 8,000 kg Overall height: 280 cm Please contact Tobias Ebert for more information.

Condition: used, mileage: 1,49,171 km, power: 316 kW (429.64 HP), first registration: 01/2019, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, Internal vehicle number: G400135 German vehicle On its way to our yard in Kaufungen - Kassel, immediately available Lredpfxjy Dyxus Aqvel More INFO via Luis Lucena Mercedes-Benz AROCS 3543 8x4 Euro 6 CIFA MK25 1,032 operating hours Year of manufacture: 2018 CIFA MK25H-80-RH-PB607EPC Very good condition! Financing Example: * Internal number: G400135 * Purchase price: €144,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €2,250.02 * Final residual value: €26,380.00 If this offer suits you or you would like it tailored to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and changes excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.