Used Durchmesser 65 Mm Sph 200 Mm for sale (82,672)

Condition: excellent (used), Clamping disc with T-slots diameter 485 mm Dkedpfx Aefm Tq Tekgjn Bolt circle diameter 118 mm Hole spacing 170 mm

Condition: used, Face drivers Make WMW Clamping ranges 30 - 200 mm pmax 3500 kn Dkjdpfocu Ngksx Akgen Short taper size 5

Condition: used, Circle cutter MK 5 from 50 - 200 mm in diameter Dkedpscxqbgofx Akgjn

Year of construction: 1998, condition: excellent (used), 1/2 lunette steady rest suitable for diameter 500 mm SPH 450 mm quill diameter 100 mm Dodpfsfgwi Tox Akgskn

Condition: excellent (used), Face drivers diameter 250 mm Dkedpfsf Dx Skex Akgsn clamping range : 120 - 200 mm max. speed 3500 rpm. weight 30 kg

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm Dkodpfx Akerv Avnegjn -Weight: 2.9 kg/piece

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush Dkedjrw Daaspfx Akgsn -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: excellent (used), Faceplate (28517) Dedpot R S A Nefx Akgjkn Diameter 400 mm Mounting KK 6 Cone diameter 106.39 mm 4 stud bolts M 12 Pitch circle diameter 133.4 Weight 80 kg

Condition: excellent (used), Year of construction: 2005, 19 stations design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm Dkodjh Tm Raspfx Akgon

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette Dkjdpfx Akoh Tm Rlogjn shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: good (used), Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos Dkodpsd Nrpgjfx Akgsn -Dimensions: 1000/270/H900 mm -Weight: 216 kg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S Dodpfx Aoykuh Nokgekn with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Dkodpfx Akoykud Rjgjn ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Dedpfxjyktrts Akgekn TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm Dkodpfx Aoyvrd Tskgen -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Dedpexbhtrofx Akgskn Shaft, pump: Tempered steel

Condition: good (used), Bezel, steady rest, lynette Dedpfew A Ni Tsx Akgjkn -Bezel: max. opening Ø 170 mm -Centre height: 325 mm -Support: ball bearing -technical drawing: in the photos -Dimensions: 520/260/H590 mm -Weight: 77 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Quantity: 10x reamers Dodpfxscbyzus Akgokn -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Price/Sale: only complete set -Weight: 24 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Various sizes: Ø 13-33 mm Dsdsb A Rbvjpfx Akgskn -various: recordings -Sale: only complete set -Weight: 7.2 kg

Condition: good (used), Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: Dodpfx Ajc Innkjkgokn 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Condition: used, maximum load weight: 30,850 kg, overall weight: 36 kg, axle configuration: 3 axles, first registration: 09/2019, Year of construction: 2019, Equipment: ABS, Kraker CF-200 moving floor trailer, approx. 92 m³, SAF axles, lift axle, air suspension, disc brakes, platform, roll-up tarp, remote control, EBS, ABS Dkjdpfx Akeyyt Emsgen

Condition: excellent (used), Year of construction: 1994, Device description: grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning Dkedpowyb Ntefx Akgon belt oscillation working height up to 150mm

Condition: good (used), Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm Dedoykzfhepfx Akgekn -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Condition: used, Year of construction: 2011, Tube Grinding Machine – Custom-Built - Tube grinding machine with CE marking - Suitable for grinding or surface pre-treatment of various pipes - Used for galvanized steel pipes as surface pre-treatment before painting - Can be modified for other materials (requires different abrasive belts and possibly adjustments to the feed system) - Control system: Mitsubishi - Automatic infeed and outfeed from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored after processing - Pipes are picked up by grippers and guided through the machine to the outfeed - Includes Felder RL125 extraction system for grinding dust removal - Requires compressed air for operation - Machine is sold without safety equipment Dksdjx E T Swopfx Akgsn - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load (grinding machine): 6.75 kW - Connected load (extraction): 3 kW - Footprint (without extraction unit): 2,500 x 20,500 mm

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg Dodpjyizh Tefx Akgjkn