Used Eddy Current Separator Eis 1000 S for sale (78,671)

Condition: used, Year of construction: 2026, Block cutter BS254 - grit size 0 - 30/35 mm Nedpfxszv N E Se Ap Dolh Blocks in the wear zones are welded with armor wire. Currently, an OQ70/55 adapter is installed – not included in the price – available upon request. For excavators from 18 tons / wheel loaders from 10 tons. Cutting width 1200 mm / 4 shafts Capacity 1.50 m³ Throughput / hour 52 - 77 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., which cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating smaller pieces in mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.124 – the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.124 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2018, Screening shafts with square discs, separation distance 40 mm Nlsdpozv Rg Refx Ap Djh Coarse screening - grain size 0 - 45/50 mm Wheel loader attachment for Volvo L50-120 included in the price Wheel loader from 15 t Cutting width 2600 mm / 3 shafts Capacity 2.60 m³ Throughput / hour 80 - 140 m³/hour Working pressure 280 - 300 bar Oil requirement 200 - 280 l/min The separator crushes clods of earth and separates stones, roots, and branches from still usable soil. Other shafts can also be installed in the separator at any time, thanks to the patented Wolf shaft couplings; conversion time approx. 40 to 60 minutes. The separator is equipped with an overflow protection to increase the bucket capacity and protect against flying stones. The TSP.263 - the bearings are maintenance-free; the chains should be sprayed with spray grease via the maintenance flaps every 20 operating hours. Dimensions and weight without adapter.

Condition: used, A complete set for a cold storage facility with a capacity of 800-1000m³. A wide-range positive compressor from the renowned German company Bitzer, along with a Thermofin cooler and a Centauro condenser. Njdozdf H Aspfx Ap Dslh

Condition: used, Year of construction: 2006, Manufacturer: CFS Model: CM1000 Year: 2006 Condition: Used Serial Number: 486 Stock Number: 3400P Belt width: 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2650 x 1800 x 2400 mm Weight: 1000 kg Nsdpfxozltfbj Ap Djlh

Condition: used, Ground compressed. Recording: MS25 Nledpfjzkzh Iox Ap Doh Cutting width: 1000 mm

Condition: excellent (used), functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Nledpfx Apjzmgcvo Dsh Technical Specifications - Working Areas - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional - Transport organization and handling - Machine installation and setup - Commissioning of the machine

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. The machine is still in production. Available for delivery in August 2026. Nedpfey I Ak Uox Ap Dslh Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 frequency inverter SN: 1000349178, unused in opened original packaging, 100% functional, scope of delivery as per photos. Nsdpfxey Nr Apo Ap Djlh

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Nledpey Spclsfx Ap Dsh Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt Nodpfx Apoy Sp Hdj Djlh

Condition: ready for operation (used), functionality: fully functional, The Glass VSM 1000 mixer is an industrial machine designed for the homogenous mixing of food products in demanding food processing environments. It is used to ensure an even distribution of ingredients, particularly in meat processing and prepared food production lines. In this way, it guarantees consistent quality while improving product stability. Thanks to its robust design and intensive mixing system, the Glass VSM 1000 allows for rapid and uniform mixing of products. The machine ensures efficient operation even with large volumes, which directly optimizes production performance. Consequently, it helps improve material yield while limiting variations between batches. Furthermore, its continuous operation allows for a smoother flow of industrial cycles. Next, this mixer stands out due to its all-stainless steel structure and design tailored for environments with high hygiene requirements. At the same time, it can be easily integrated into an existing line, particularly after grinding and before packaging or cooking. In addition, its simplified maintenance reduces downtime and improves machine availability. Finally, the Glass VSM 1000 mixer represents an efficient solution for manufacturers seeking reliability, consistency, and productivity. As a modern piece of equipment, it offers an excellent balance between industrial capacity and control of investment costs. Nledpfxjy Tkkms Ap Deh Technical specifications: Year: 2023 Machine number: 4456 Power: 14 kW Power supply: 400 V Electrical configuration: 3~ PE Frequency: 50 Hz Rated current: 30.7 A Maximum protection: 32 A Unladen weight: 1800 kg Construction: stainless steel

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Nlsdpfx Aezgupkop Dsh Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Operating hours: 14,000

Condition: ready for operation (used), functionality: fully functional, overall weight: 9,000 kg, Used impact crusher, Kleemann SDR 1000 x 230 mm, capacity 20 - 70 t/h, final grain size approx. 0/25 mm, maximum feed size 200 mm, weight approx. 9 tons. The crusher can be easily rotated by hand. Immediately available, subject to prior sale. Nlodpjzhn Hxjfx Ap Doh

Condition: used, material width max. 700 mm max. 1 mm Nlodpfxezh N T Te Ap Doh Cutting capacity structural steel max. 1 mm Cutting capacity aluminum max. 1 mm Cutting capacity stainless steel max. 0,5 mm max. 1 mm max. 1,5 mm weight of the machine ca. ca. 150 kg dimensions 1200 x 400 x 1200 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Nljdpfx Apezghc Do Djh Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 Nljdpfez A Tbuex Ap Deh MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Fanuc control system, tool extraction spindle, powered tools, Nlsdpfozz H Dvjx Ap Deh tool magazine.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Nljdpfoy Anp Ejx Ap Deh Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Nledpfjx Rbkxsx Ap Doh Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Nsdpfx Aoyh I Unsp Djlh Specifications: Surface Area: 16 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 100°C Tube Side Max. Pressure: 6 bar Tube Side Max. Temp.: 100°C Tube Diameter: 25 mm Number of Tubes: 68 Weight: Estimated: Kg 690.0

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Machine Benefits Nsdpjyi Eliofx Ap Dolh Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance between centres: 1000 mm • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

Condition: good (used), functionality: fully functional, overall weight: 105 kg, total height: 1,400 mm, total length: 1,850 mm, total width: 1,150 mm, miscellaneous Hydraulische Baumschere mit Säge für Manitou Producing company Dorfmeister Type Holz Fällgreifer SS 550 Height (mm) 1,400 Length (mm) 1,850 Nledpfxoyhhvze Ap Deh Weight (kg) 105 Width (mm) 1,150

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Nljdpeyckiajfx Ap Doh Make: Sepamatic Model: 2000VT Built 2012 Low running hours: 1522 supplied with 2 drums

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Nledpfx Apexl Tars Dsh Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. Nlodpfx Apoxwvrue Deh The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.