Used Emco Center Lathe for sale (15,376)

Condition: new, Year of construction: 2024, turning diameter over bed 250 mm Ncjdpfswlvk Asx Aqvst turning diameter over slide rest 145 mm turning length 550 mm center height over bed 125 mm centre distance 550 mm bed width 135 mm spindle bore 26 mm turning speed range - stepless 50 - 2.000 U/min power requirement 750 W 3-jaw-chuck diameter 125 mm taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 70 mm voltage 230 V weight of the machine ca. 120 kg dimensions of the machine ca. 1,25 x 0,60 x 0,50 m

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 51 mm, turning diameter: 575 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, overall weight: 2,000 kg, 2-axis Newall DRO Capacity: 1500 x 575 mm Spindle bore: 51 mm Maximum spindle speed: 2000 rpm Weight: 2000 kg Ncodpfoyxfk Sjx Aqvjt

Condition: used, Year of construction: 1974, functionality: fully functional, Lead and feed screw lathe Make: Heidenreich & Harbeck Model M530K Year: 1974 Technical Data Manufacturer: Heidenreich & Harbeck Model: M530K Year of manufacture: 1974 Control: Conventional Centre distance: 2000 mm Swing over bed: 530 mm Swing over cross slide: 280 mm Spindle bore: 70 mm Spindle speed: 9 - 1800 rpm Dimensions (L x W x H): 4.05 x 1.50 x 1.40 m Machine weight: approx. 4 t Equipment - Röhm 3-jaw chuck, D 250 mm - 1 fixed steady rest - Removable gap bed over 400 mm length - 2-axis digital readout - 1 drill chuck - Coolant pump All data subject to change without notice. Ncedsyyk Raopfx Aqvet A powered demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6/0049/35449, MACHINE SPECIFICATION Centre height 190mm Distance between centres 1250mm Swing over bed 387mm Swing over cross slide 241mm Spindle bore (max. Bar dia) 54mm Spindle nose mounting D1-6 Camlock Taper in spindle nose bush & tailstock barrel No. 4 Morse Width of bedways 279mm Total travel of cross slide 235mm Total travel of top slide 120mm Total travel of tailstock barrel 155mm Spindle speeds (16) 25-2000rpm Drive vee belt and clutches Spindle motor 5.6kW Whitworth threads (45) 2 -72 tpi Diametral threads (21) 8 – 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds. Per rev. of spindle 0.0015 – 0.040” Surfacing feeds. Per rev. of spindle 0.00075 – 0.020” Nedpfx Aey Nkwfoqvoct Machine in Metric execution Machine Equipped with Newall NMS300 2 axis DRO system 3 & 4 Jaw chucks Quick change toolpost and 3 off toolholders Lighting Coolant system Chuck guard Rear splashguard

Condition: used, turning diameter over bed 660 mm turning diameter over slide rest 450 mm turning length 2000- 2880 mm throat Ø 1200 x 880 mm Height of centres 330 mm spindle passage 85 mm turning speed range 10- 700 U/min tail stock MK 5 transmission ratio 24 tool holder Multifix "C" dimensions 3,5/4,4 x 1,45 x 1,1 m weight of the machine ca. 4,2 t konv. lathe with movable bed for long gap. - movable bed 880 mm - swing Ø in gap: Ø 1400 mm - 3- jaw chuck Ø 315 mm - facing plate Ø 800 mm - facing plate Ø 500 mm - rapid travers - some tool holders Nsdpfx Aeyyqd Tsqvsct

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm Ncsdpfxsyylq Uj Aqvst >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 Ncedpfjyylqhjx Aqvet >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 205 mm Swing diameter in gap: 560 mm Spindle bore: 51 mm Bed width: 290 mm Speed range: 46 - 1750 rpm Feeds & threads: yes Quill stroke: 170 mm Ncedpfx Aqjykkbrevot Quill diameter: 52 mm Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 1850 x 900 x 1380 mm Weight: approx. 1,400 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw scroll chuck, Ø 200 mm • Gap bed • Steady rest • 4-position quick-change toolpost • Bed stop • Coolant system • Hinged chuck guard • Lighting The machine comes from a training workshop and is in a very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Gap length 357 mm Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Ncjdpfxsyt Ihno Aqvet Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest Ncedsyt Iaqepfx Aqvst - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Ncodpfx Aqsyyb T Sjvet Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Njdpfx Asy Nfqmoqvjct Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Ncodpfsx D Uf Tex Aqvot

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Ncsdpfxjw Uigus Aqvst Technical details shown on picture.

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, 26 spindle speeds from 4.5 to 1400 rpm - powered top slide - rapid traverse - 400 mm Forkardt chuck Nodpsy D H Rwofx Aqvsct

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn Nedpfx Ajqwqiaeqvjct • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Njdpfx Aey D Tpmjqvect

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible. Nodpfx Aqoy D Tptsvect

Year of construction: 1977, condition: ready for operation (used), Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible. Ncedpfx Aqsy D Tpyovet

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Nedey D Tpaepfx Aqvsct

Year of construction: 1968, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible. Nedpfxey D Tn Nj Aqvsct

Condition: used, spindle bore: 51 mm, swing diameter over cross slide: 300 mm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 300 mm, Used lathe Brand: Amutio Cazeneuve Model: HB 575 Distance between centers: 1,000 mm Swing over bed: 575 mm Swing over carriage: 525 mm Nodpeyzrhcjfx Aqvjct Swing over cross slide: 300 mm Spindle bore: 51 mm Speeds: 32–2500 rpm Power: 10 kW Bed width: 400 mm Includes: - 300 mm chuck with several sets of jaws - Closed steady rest - Quick-change tool post with 3 tool holders - Aurki digital readout (2 axes) - 2 live centers - Tray with coolant system

Condition: used, turning diameter over bed 1000 mm turning diameter over slide rest 640 mm turning length 6300 mm turning dia. in gap 1250 mm spindle diameter 50 mm speed 6-925 U/min Coolant 3-jaw chuck Ø 500 mm 4-jaw chuck Ø 900 mm Steady rest Ø 300 mm Steady rest Ø 560 mm Power compound Multi Fix Toolholder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nsdoyqva Tspfx Aqvjct We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 1150 mm turning diameter over slide rest 800 mm turning length 6300 mm spindle diameter 100 mm speed 4-800 (x24) U/min turning dia. in gap 1500 mm Rapid toolpost Power compound Rapid traverse 4-jaw chuck ø (mm): 800 Fixed steady rest ø (mm): 2x 400 Through-spindle cooling The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nsdpfx Aqsyqtl Hjvoct About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Accessories *2 rotary chucks with replacement jaws *5 Multifix holders *Set of interchangeable wheels *Various tips and accessories Ncjdswwl Izopfx Aqvot