Used Emit Typ: Ta0O1000/15 for sale (20,284)

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Hodpfx Aewz Nbash Sent Sliding carriage made of anodized aluminum incl. high-precision guide made of hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Hnedjw E Evzopfx Ah Sot

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height 2.90 metre overall height 1.50 metre fork length - Full cab with heating and radio Hnjdpfxjyk Tc So Ah Sst - Lighting system - Immediately operational! - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Year of manufacture: 1998 Hjdpfx Aoz Agn Djh Sjnt Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Weight: approx. 840 kg Documentation included Very good condition, fully functional.

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. Hnjdeziwzhepfx Ah Set With cast support under the panel, height 100 mm.

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg Hedpfxezq Hwns Ah Sent

Condition: good (used), 130 linear meters of shelving system from Schäfer, type R3000 Used, like new, see pictures. Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Field width: approx. 128 cm Negotiable price: €26,800 net ex warehouse The offer includes: 101 pcs. uprights or frames, 2.5 m, galvanized 600 pcs. shelves, 250 kg load capacity per shelf, galvanized 34 pcs. cross braces for bracing. 6 levels per field (more levels are possible for an additional charge) Hnodpfod Nftxex Ah Sst Also available with a field width of 100 cm! Other configurations are possible. Heights of 2.5 m or 3.5 m are available. The goods are in stock. Transport and assembly are possible upon request. Inspection possible at any time by appointment. Further information on request. We have over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty shelving used & new Description: Are you looking for high-quality storage shelves to buy? With around 100 of our own employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether it's pallet racking, heavy-duty shelving, high-bay racking, shelving systems, tire racks, or shelving for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete inventory including a thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 chuck SN:1110, used, normal signs of use, 100% functional, delivery as per photos. Hnsdpfx Asz Ac Rush Sst

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 Chuck SN:1111, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdpfxjz Ac Rze Ah Sjt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, Zeiss Accura II Hnedpfx Aezpzp Neh Sjt - measuring range 2000x3000x1500 mm - RDS with XXT ( possible additionally LineScan) - C99 - pneumatic damping system - laser safety system installed - compressed air drying system included - probe changer, callibration sphere, aluminiumi threaded plate included - latest Calypso basic CNC - installation and callibration included (ILAC possible)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Very little used. Like new. TOP condition. Hedpoynkgiofx Ah Ssnt

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm Hnjdpfxozvf Dwj Ah Sst - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included

Condition: good (used), Haas ST-15 CNC lathe, year 2019. Hedpfx Aoz Aaw Esh Sont

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Hnjdpfjy Ndyaox Ah Sjt Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: ready for operation (used), Year of construction: 2021, A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible. Hnodpfxezcfkrs Ah Sst

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Hnodotu H Avspfx Ah Set At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Hsdjyzhqyspfx Ah Sont

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Hnodpfx Aszghf Esh Sjt

Condition: good (used), 30 linear meters of shelving system, Schäfer Type R7000 Used, in good condition, see pictures Height: 2.1 m Depth: 50 cm Load capacity per shelf: 200 kg Field width: approx. 99.8 cm Negotiable price: €3,250 net ex warehouse The offer includes: + 31 uprights/frames, 2.1 m, galvanized + 120 shelves, 200 kg load capacity per shelf, galvanized 4 levels per field (more levels are possible at an extra cost) Various heights up to 12 m available. Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION Hnsdpfx Ash Eulkjh Set For disassembly and clearance orders, we offer a complete all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in broom-clean condition. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, axle configuration: 3 axles, first registration: 11/2018, color: other, Year of construction: 2018, Empty weight: 9.880 kg Hjdpfxsydmgqo Ah Sjnt Axle 1: left 6 mm right 6 mm Axle 2: left 12mm right 12mm Axle 3: left 8 mm right 8 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019-21130, overall weight: 1,950 kg, pressure (max.): 300 bar, Equipment: type plate available, AIRCO PSAL 15 SN – Nitrogen generation system (PSA nitrogen generator), year of manufacture 2019, serial number 2019-21130. Manufacturer: AIRCO Systems GmbH, Frankfurt. Hnedpfx Ahezlat Ej Sst Complete, turnkey PSA system for on-site nitrogen (N₂) generation – for example, for laser cutting machines, packaging, or process engineering. Equipped with an integrated AIRCO/Bauer MINI-VERTICUS high-pressure booster, control cabinet “NITROGEN N₂”, buffer tanks, and piping station. Technical data: – Type PSAL 15 SN (INMATEC technology) – Max. pressure 300 bar – Weight approx. 1,950 kg – Year of manufacture 2019, low operating hours, serviced (AIRCO Systems service) Operates on electricity – Inspection with demonstration possible by appointment. Maintenance documentation available upon request. Dismantling/loading to be carried out by the buyer or by agreement. Payment before collection. Sale as is, excluding warranty. Export possible. Please include a call-back number with your inquiry.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 38,000 kg, empty load weight: 11,820 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, Year of construction: 2006, operating hours: 9,184 h, We are selling our Bremat F2.15, manufactured in 2006, with a current operating time of 9,184 hours. The system is in good, age-appropriate condition and shows the usual signs of wear and tear. It is fully functional and ready for immediate use. Until recently, we were still using the system ourselves in our ongoing operations. The sale is solely due to the purchase of new equipment. Data & Condition: Manufacturer/Model: Bremat F2.15 Year of manufacture: 2006 Operating hours: 9,184 h Condition: good, age-appropriate signs of wear and tear Fully functional and ready for immediate use Next TÜV inspection due 08/2026 A new TÜV inspection can be carried out upon request and after consultation Sale is made with the system deregistered Hjdpfjzu Iiyjx Ah Sont The upper cover sheet is missing and would need to be replaced. However, this does not affect the function or operational readiness of the system. An inspection of the system is possible by prior arrangement. Further information and pictures can be provided upon request and with serious interest. The system is sold as a used semi-trailer in its current condition.

Condition: used, Year of construction: 2010, load capacity per storage section: 300 kg, We are offering a used Medek pallet racking system / push-back racking system, type Boltless XL, manufactured in 2010, from our own inventory. Technical data: – Manufacturer: Medek – System/Type: Boltless XL push-back racking – Year of manufacture: 2010 – Total length: approx. 10.0 m Hnsdez Ah E Djpfx Ah Sst – 18 push-back channels – 7 pallets per channel – a total of 126 pallet spaces – permissible pallet weight: max. 300 kg per pallet The racking system is in used condition and has been regularly inspected during operational use. The racking is currently fully assembled and can be inspected by appointment at our location in 63165 Mühlheim am Main. If required, an additional racking inspection can be carried out before delivery. Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own cost. The racking is sold in its current assembled condition. Technical data on the system, year of manufacture, and maximum pallet load are documented on the existing nameplate. Further detailed photos and available documents will be provided upon request. Price: €5,500 net plus statutory VAT – negotiable. Location: 63165 Mühlheim am Main, Germany Delivery terms: EXW / from location Sale exclusively to businesses.

Condition: excellent (used), functionality: fully functional, Lathe Takisawa TS-25 The Takisawa TS-25 Technical specifications for the Takisawa TS-25 Turning diameter: 280 mm Turning length: 600 mm Spindle speeds: 40 – 4,000 infinitely variable Spindle bore: 62 mm Hedpfx Aey Artnjh Sont Drive power: 18.5 kW Control: Fanuc 15 T

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer the Stephan Microcut MC15 cutter, designed for precise grinding, mixing, and emulsifying food products in food processing plants. It is a compact, industrial machine manufactured by Stephan Machinery GmbH, a company renowned for its solutions for producing fillings, emulsions, pastes, sauces, and other products requiring a uniform texture. The MC15 model is ideal wherever consistent processing results, high-quality grinding, and stable operation under production conditions are essential. With a rotational speed of 2945 rpm and a power output of 11 kW, the machine ensures intensive and effective processing of raw materials, resulting in a uniform consistency of the final product. It is an excellent solution for applications requiring precise cutting and dispersion of ingredients. Hnedpfx Ahsy Eplws Set The Stephan Microcut cutter is a good choice for companies looking for a used, reliable machine for precise product processing. Technical specifications: Manufacturer: Stephan Machinery GmbH Model: Microcut MC15 Year: 2020 Power supply: 400 V Power: 11 kW Rotational speed: 2945 rpm Current: 22 A Motor type: HEFIE3 132L/2-2200 Advantages of the Stephan MC15 cutter precise grinding and emulsification of the product, high operating speed, compact, industrial design, German build quality, suitable for the production of fillings, emulsions, pastes, and sauces, stable operation in an industrial environment. Stephan Microcut MC15 is a practical solution for companies that want to improve product processing quality and work with a proven machine from a reputable manufacturer.