Used Emod 90/S2 for sale (13,773)

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Nsdpfx Asy Tig Hjqvslb Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Nlodpfx Aqoy Th Enevjb Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Nljdevg Iqxepfx Aqvjb Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Nedpjd Dc Unsfx Aqvolb Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: used, Year of construction: 2019, liter capacity 600 l Nledpfxjwhzmzs Aqvsb Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Nlsdpfx Asrdg Tpsqvsb Year: 2000 IPC not working (see map)

Condition: used, Year of construction: 2011, overall dimensions 135x89 mm; power supply 230 V,50/60 Hz, 0,5 A; Compressed air supply 6 bar; Calibres 25-85; Clipps E200-243; Njdpfxjy Txnaj Aqvolb weight 100 kg.

Condition: new, functionality: fully functional, Laser Core Identification YLP: Ytterbium Laser Pulsed. This identifies it as a pulsed nanosecond fiber laser operating in the near-infrared spectrum (typically 1064 nm wavelength). HP: High Power. Indicates the heavy-duty sub-series designed for fast processing speeds and high ablation rates compared to the standard, low-power desktop marking modules. 1: Indicates the Optical Beam Quality (\(M^{2}\)) standard or series generation (typically targeting a beam parameter product near \(M^2 \leq 2.0\) for clean, tight focal spots). 30x240: Pulse Width / Duration Configuration. Refers to its tunable or specific pulse length capability (in nanoseconds), optimizing it for balancing rapid material removal without massive heat-affected zones. 200-200: Defines the power metrics.200 W Average Output Power: Capable of sustaining continuous pulsed work at 200 Watts. 200 kHz Pulse Repetition Rate (PRR): The maximum frequency of the laser pulses, determining how quickly it can scribe or clean surfaces. Electrical Requirements (90-240 VAC) Nlodpfjy Udyqsx Aqvsb Power Input: Features a universal, autoranging power supply unit (PSU). It safely plugs directly into standard global wall grids spanning 90V to 240V AC (Single Phase, 50/60 Hz) without needing heavy industrial 3-phase transformers. Core Applications Because of its high 200W power and high-frequency pulsed delivery, this model is typically integrated into CNC machinery or robotic cells for: High-Speed Laser Cleaning / Ablation: Removing rust, paint, oxides, and coatings from metals without damaging the base substrate. Deep Laser Engraving & Marking: Precision engraving on hard metals, ceramics, and highly reflective materials (like aluminum or copper). Silicon / Solar Panel Scribing: High-throughput cutting or edge deletion tasks in manufacturing. Brand new never used. Please check out our other listings as well.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg Nodpfxoy Ti I Ro Aqvjlb

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks • Front lugs for securing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Nodpjyzc Dhofx Aqvelb Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Nljdjuzn Nnspfx Aqveb Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Three-phase motor, electric motor Nsdpsy S Rl Iofx Aqvslb -Manufacturer: Kracht, electric motor type MD 90-75 -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 16 x 18 mm -Dimensions: 305/230/H190 mm -Weight: 15.3 kg

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller Nlsdpfxoyv Nfbo Aqvob - induction hardened rolls

Condition: used, Cutting height max. ca. 100 mm Nodow Ng T Uopfx Aqvslb Chain width 300 mm Motor output 45 kW

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Nljdpfefh Tmmsx Aqvsb Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Nodpfxed E Ixzj Aqvolb • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule This machine can cut 90° only !!! Nlodpfey Dgdkjx Aqveb Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Suction plant-Ø : 100 mm

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l Nsdsvuul Sopfx Aqvelb power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive Nsdpfjv Df I Nex Aqvolb

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multilame saw, year of manufacture 2016. In very good working condition! Almost like new. Nsdpfx Aqjy Sganjvelb

Condition: used, machine/vehicle number: 005321, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Max feed speed: 35 m/min Maximum panel thickness: 40 mm Nsdpfx Asy Nkrcoqvslb Operating Units: 8 nr

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Njdpfxowacqle Aqvjlb Operating Units: 9 nr

Condition: used, machine/vehicle number: 005335, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Nodpfxey I Trcs Aqvslb Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm Operating Units: 13 nr

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood Nsdpfx Aqswcmxlovjlb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. Nsdpfx Aey Ulitjqvjlb If you have any questions or require further information, please feel free to send us a message by email.