Used Ewag Tool Grinding Machine Ewag Rs15 for sale (66,483)

Condition: new, neu ca. 2 Wochen ab Auftragse Codpfx Ajywcl Roi Sjrh Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. Cedeyv Iqvepfx Ai Sorh WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: Cedpfev Tnhwjx Ai Sjrh ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: used, Year of construction: 1989, Technical details: rotary table diameter: 630 mm grinding height: 350 mm Codpfxoz E Hu Hj Ai Ssrh grinding head - power requirement: 11 kW grinding length: 600 mm max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. *

Condition: excellent (used), FANUC Power Mate control Crjdpfxsyla Nue Ai Ssh Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm Codsu Nggzspfx Ai Serh grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base i.D. *

Condition: excellent (used), Grinding range 800 x 600 x 500 mm Crodpsr Ezfwsfx Ai Soh Wheel diameter 400 mm Magnetic plate 800 x 600 mm Automatic dresser Automatic balancing device Misc.accessories MARCELS MASCHINEN CH

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t Crsdpfx Ajzaunzsi Ssh dimension machine approx.LxWxH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW Cedpfsh St Dqex Ai Serh WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm Crsdjw Rktbopfx Ai Ssh *

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement Cjdpjz Ek Abjfx Ai Ssrh DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Machining diameter: 3,000 mm Machining height: 500 mm Z-axis travel, left support: 551 mm Cedpfx Aisz Difxj Serh Z-axis travel, right support: 350 mm W-axis travel: 1,100 mm Rotation speed, left/right: 2,000 min-1 Max. table load: 6,000 kg 2x grinding supports – swiveling 2x diamond dressing tools Magnetic clamping plate by SAV Control system update in 2004 Control system: R&D MTC 2x-G

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Crodpezc D Dkofx Ai Soh Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Speed of the dressing spindle 1500-16000 1/min feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation Cjdpfjza Hqzex Ai Serh

Condition: good (used), Year of construction: 1988, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm grinding wheel diameter 500 x203,2 x 50-100 mm total power requirement 12 KvA weight of the machine ca. 4,7 t dimensions of the machine ca. 3,3 x2,0 x 1,8 m - Includes belt filters Crodpfxezu A Sis Ai Seh - Includes grinding wheels

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Credsw I Tt Sopfx Ai Ssh Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: Check machine nameplate for serial number, grinding wheel width: 125 mm, grinding wheel diameter: 400 mm, total height: 2,320 mm, total width: 4,600 mm, total length: 6,500 mm, grinding length: 120 mm, type of input current: three-phase, rotational speed (max.): 7,200 rpm, feed length X-axis: 120 mm, feed length Y-axis: 15 mm, workpiece diameter (max.): 30 mm, input voltage: 400 V, Equipment: rotational speed infinitely variable, German Mikrosa Precision CNC Infeed Centerless Grinder MIKROSA KRONOS S 125 Model built late 2013, 1 unit available Capable of complex profile grinding with superior grinding quality and outstanding stability. Equipped with automatic robotic loading & unloading system, wheel dynamic balancing unit and rotary dresser. The machine has always been maintained by official MIKROSA service engineers. Commissioned at the end of 2013. Production ceased in 2019. The machine has remained powered on and kept under warm-running condition ever since. Workpiece diameter range: 0.5 ~ 30 mm • Max workpiece length for infeed grinding: 120 mm • Grinding wheel: Ø 400 x 125 x 203.2 mm Codozqx Apepfx Ai Ssrh • Regulating wheel: Ø 250 x 125 x 127 mm

Condition: like new (used), Year of construction: 2013, Machine has been equipped with a new PCD software. Crsdpfsx Tpibsx Ai Ssh

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Crodoya Dagspfx Ai Ssh Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 Cedpfez Ebvrox Ai Sjrh CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Crsdpfx Asz Iz Slei Soh Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Codpfxjmmdhrs Ai Sjrh Magnetic plate 500 x 250 mm Misc.accessories MARCELS MASCHINEN CH

Condition: used, centre height: 140 mm; table size: 150x1050 mm; Csdpocbhl Nofx Ai Sorh longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; 2 engine speed: 1500-3000 rpm; 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;

Condition: used, Year of construction: 1998, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Überholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware Antriebe,Motoren,Maßstäbe aus Originalmaschine. Werkstückspindelstock nur umlaufend mit 320Nm numerisch gesteuerte B-Achse Innnschleifeinrichtung Dia 120mm HF-Spindel Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 400mm Innenschleifeinrichtung für HF Spindeln Reitstock mit Mikroverstellung KEL SET Messsystem Csdpjz Ikvgefx Ai Sorh Aktiv-Längspositionierung Kel-Pos Anschnitt-Sensor Marposs

Condition: new, Year of construction: 2026, functionality: fully functional, Type FNX 640 NC-T, fully enclosed Magnetic clamping plate/grinding area 600 x 400 mm Spindle speed 3000 rpm, drive power 7.5 kW Operating voltage 400 V / 50 Hz Table axis with V-shaped flat guide and toothed belt drive Y/Z axis with linear guides and ball screw drive Cjdpfx Aisz Hyare Sjrh Table load 300 kg Control: FANUC NC-T with Stöckel touch-screen interface Grinding-related equipment: Folding dresser Grinding mist extraction Strip filter system Options: Cycle chaining Profile grinding VPN connection for remote diagnostics/remote maintenance etc. The machine is fully functional and can be inspected at the manufacturer's premises by appointment.