Used Fehlmann Picomax 51 Dc for sale (7,200)

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. Kdjdpfx Aozg N E Hshher 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top-of-the-line new machine, "THE TANK," with Siemens 828 Shopturn, BMT65 (MORI-Seiki NL series), Renishaw measuring arm, and counter-spindle. Available with automation for an additional charge (see images). - Siemens touch display, 15.6 inches - Main spindle, 3,500 rpm - Siemens motor - Flat guides, Turcite coated - 12-position BMT turret for 12 driven tools - 3-jaw chuck, Ø 250 mm, main spindle - 3-jaw chuck, Ø 150 mm, counter-spindle - C-axis - Y-axis Kdsdpfx Ahsylnb Sjhjr - Counter-spindle - Chip conveyor - Coolant system and internal coolant, 20 bar - Work area light - Foot pedal chuck - Machine status light, multi-colored The accessories shown in the images are not included in the offer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Kedpfx Aoyzblqjhhjdr Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Kodpfszp Nknjx Ahhodr Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Kdedpfx Ahoy Taixoher Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Kjdpfx Ajwi Sbrehhjdr Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1002, Fully functional dessicant dryer Kdedpfx Ahsy R Slgohjr

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Kdjdpfx Aezvnqtehhsr Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,850 h, load capacity: 5,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Mast type: Triplex Kdjdpsu Adrusfx Ahhsr Technical condition: normal

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona Ksdpev Aa Twjfx Ahhedr  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush _____

Condition: not inspected (used), functionality: not functional, Rofin DC 025 industrial CO₂ slab laser resonator Manufacturer: Rofin Type: DC 025 Operating capacity: unknown Rated power: 2500 W Power range: approx. 250 – 2500 W Laser type: CO₂ slab (diffusion cooled) Excitation: radio frequency (RF) Operation: continuous (CW) + pulse mode Beam parameters Wavelength: 10.6 µm Kdjdpfsy Dubdex Ahhsr Beam diameter: < 25 mm Beam quality (K factor): > 0.8 Divergence: < 0.5 mrad Stability: ±2% (within 24 hours) Dimensions (L × W × H): approx. 1700 × 800 × 850 mm Weight: approx. 500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA38016, Technical data: 1x Demag KBK 2 column-mounted slewing crane, SWL 500KG, with Demag DC electric chain hoist (250Kg - year 2007) Load capacity at full outreach: 500KG / 0.5t Height: approx. 3.55m Under jib: approx. 3m Outreach: 3m Hook height: approx. 2.65m Total weight: approx. 550KG With 250KG Demag DC electric chain hoist Incl. bolts, cable trolley, travelling gear, end cap, etc. Slewing range: 300°, connection 400V 16A The crane is disassembled and available immediately Item location: 75053 Gondelsheim More cranes available with load capacities from 80-5000Kg, please inquire Kedpox U Rbuofx Ahhsdr See pictures Shipping via freight forwarder or collection strictly by appointment

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 680 kg Kedjzqi S Ujpfx Ahhedr Please contact Gebrauchtgeräte Center for more information

Condition: good (used), Year of construction: 2013, operating hours: 170 h, machine/vehicle number: 189132, load capacity: 363 kg, overall weight: 5,417 kg, construction height: 2,670 mm, product width (max.): 1,760 mm, working height: 14,000 mm, enginetype: Electric, manufacturer: Genie Ksdpfjzcbhajx Ahhsdr

Condition: used, empty load weight: 6,623 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 08/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, tire condition: 40 %, color: yellow, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41583 Schmitz, SCB S3T * Year of manufacture: 2018 * ABS, anti-lock braking system * EBS, electronic braking system * Air suspension * Plain tarpaulin * Used tarpaulin * Edscha / sliding roof tarp * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eye holes in the outer frame (Multilock outer frame) * Retractable lashing eyes Kdodpfxjzt Htuo Ahhor * Pallet stop bar * Mechanical lifting roof * DCE 9.5 Daimler Chrysler certificate * Portal door * Aluminum side walls * Air connection coupling head (red + yellow) * 2x7-pin connecting plug * 15-pin connecting plug * Lifting and lowering device * Ferry lashings * Storage box / tool box * Galvanized * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,623 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos% * Tire condition 1st axle: 30% -- 30% - Tire size: 445/45 R19.5 * Tire condition 2nd axle: 80% -- 30% - Tire size: 445/45 R19.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 445/45 R19.5 * Tire sizes: 445/45 R19.5 * Interior dimensions: L=13,620 mm, W=2,480 mm, H=3,000 mm * Interior volume*: 101 m² * Pallet spaces: 34 * Aluminum plank tarpaulin * Second ride height, Varios * 28mm floor, 7,100kg forklift axle load * Upon request, we will send you a video * Construction description and more pictures Disclaimer: Subject to changes, prior sale and errors You can find more pictures and videos on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: ready for operation (used), SEM MT30Z4-85 ferrite brushed DC servomotor SN:G12677 + encoder SD-253-510W, used, normal signs of use, 100% functional, delivery as shown in the photos Kdjdpst S Amzsfx Ahhsr

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Kdjdpfx Ahjx Eikyohsr Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: used, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 07/2026, fuel type: diesel, empty load weight: 2,125 kg, maximum load weight: 1,375 kg, overall weight: 3,500 kg, tire size: 215/70R15C, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 07/2028, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 5.3 l/100km, fuel consumption (combined): 6.3 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,413 mm, loading space volume: 10 m³, loading space length: 3,120 mm, loading space width: 1,870 mm, loading space height: 1,662 mm, Year of construction: 2026, front tire size: 215/70R15C, rear tire size: 215/70R15C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato panel van L2H1 2.2MJ 103KW/140HP, new vehicle in stock, immediately available. Latest model of the Series 10 (9.2)! Syncom: 290.AL3.2 Color: White 549 Gross vehicle weight: 3,500kg Cargo area: L: 3,120mm W: 1,870mm H: 1,662mm 6-speed manual transmission 025 Air conditioning 2PX 5'' infotainment system with color display, DAB radio, Bluetooth interface 316 Rear view camera 245 Radio remote control on the steering wheel AYZ package ''Visibility'' 051 Rain and light sensor LPZ Fog lights with static cornering lights NHR Cruise control with speed limiter 041 Electrically adjustable and heated exterior mirrors 508 Parking sensors PDC rear 9VX Double passenger seat 132 Comfort driver's seat with armrest + lumbar support 500 Driver airbag 502 Passenger airbag 5F4 Safety package Electronic Stability Control: - Crosswind assist - Trailer stability control - Post-collision braking - Rollover protection - Anti-slip regulation (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC) Safety kit: - Emergency brake assist (pedestrian and cyclist detection) - Lane keeping assist - Traffic sign recognition - Driver drowsiness detection - Intelligent speed assist 5EM Headlights darkened 4DH 980 Full-size spare wheel with on-board tools 01P Acoustic pedestrian warning system when reversing 5DE Start & Stop automatic 0AA Ecopack with Stop&Start system including activation switch, intelligent alternator (200 A), electric fuel pump 806 Heated fuel filter We will gladly provide you with a financing or leasing offer. We also offer the following as optional extras: Set of winter complete wheels on steel rims 215/70 R15 109/107R Nexen Winguard WT1 net 740EUR Set of winter complete wheels on steel rims 215/70 R15 109/107R BRIDGESTONE W810 net 840EUR Set of winter complete wheels on steel rims 215/70 R15 109/107R PIRELLI CARRIER Winter net 890EUR Set of winter complete wheels on steel rims 215/70 R15 109/107R Michelin AGILIS ALPIN net 940EUR Trailer coupling, 2.5 tons Ksdpfozuvm Hjx Ahhedr

Condition: like new (used), Coil: 24V AC/DC 3.0VA 1.5W 50-60Hz 1) ID No.: 774059826328 2) ID No.: 774059825212 Area of application: Safety circuit Width: 22 mm Height: 87 mm Kjdpfx Asyt E Dmjhhsdr Depth: 120 mm Weight: 214 g

Condition: refurbished (used), Year of construction: 1997, SCHMID T6-200 2 TAUMELPRESSE / NUTATION PRESS Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T6-200 2 Machine No.: T6-200 2 / MK 18166 Year of manufacture: 1984 Modernization / rebuild: 1997 Country of manufacture: Switzerland Machine type: Taumelpresse / Nutation Press / Orbital Forming Press Feeding automation: Ridik TECHNICAL DATA Press system: Nutation / orbital forming Nominal press capacity: approx. 200 t / 2,000 kN* Working direction: Vertical Operation: Hydraulic Control: Siemens Operator interface: Siemens SIMATIC OP Operating modes: Setup / manual stroke / single stroke / automatic continuous operation Machine construction: Enclosed industrial forming machine Feeding system: Automatic workpiece feeding, Ridik Hydraulic power unit: Integrated SCHMID hydraulic unit FORMING PARAMETERS / CONTROLS The control panel shows adjustment/control for: Taumelfrequenz: Nutation frequency Umformgeschwindigkeit: Forming speed Presskraft: Pressing force Innenformkraft: Internal forming force Stellungswinkel: Position/setting angle Stösselanschlag: Ram stop / stroke limit Innenform: Internal forming parameters This confirms that this isn't simply a conventional hydraulic press. It is specifically designed for controlled orbital/nutation forming. ELECTRICAL DATA These values are directly from the machine nameplate: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 67 kW Minimum mains fuse: 125 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.1660 CONTROL Control manufacturer: Siemens HMI: Siemens SIMATIC OP Control type: PLC controlled Manual machine control panel: Yes Parameter adjustment: Yes Automatic operation: Yes Single-stroke operation: Yes Setup mode: Yes Emergency stop: Yes HYDRAULIC SYSTEM Hydraulic system: SCHMID Hydraulic power unit: Integrated Hydraulic motor/pump assembly: Yes Pressure monitoring: Yes Multiple hydraulic circuits: Yes Kodpezvnr Rsfx Ahhedr Hydraulic pressure gauges: Machine mounted Hydraulic oil tank: Integrated

Condition: used, Empty weight: 12.500 kg Length: 62 cm Serial number: B151706 Machining center consisting of: Kodpfszvccqjx Ahhjdr - a NAKAMURA TOME CNC lathe, model: SUPER NTJ, manufactured in 2007 - a SAMSYS+ bar feeder, model: M3000 - a FANUC 18i-TB controller - Technical specifications: - Number of controlled axes: 9 axes - Number of simultaneously controlled axes: 4 - Maximum turning diameter: 190 mm - Maximum turning length: 620 mm - Bar capacity: 51 mm (R/L)/ 65 mm (Left) - Chuck: 210 mm - Spindle speed: 5,000 rpm (∅51)/ 4,500 rpm (∅65 mm) - Spindle nose: A2-5 (∅51) / A2-6 (∅65) - Spindle bore: 63 mm (∅51) / 80 mm (∅65) - C-axis: 0.001° - 600 rpm - B-axis: -91° to +91° - 180°/s - 2 turrets: 24 stations - 12 powered tools - Powered tool speed: 60 to 6,000 rpm - X1 travel: 345 mm - X2 travel: 167.5 mm - Z1 travel: 1,240 mm - Z2 travel: 685 mm - Y-axis travel: 45 mm - Feed rate: X1/X2 16 m/min - Z1/Z2 40 m/min - Machine weight: 12,500 kg - Approximate dimensions: L 3,660 mm x W 2,320 mm x H 2,170 mm Hours on the counter: approximately 2,960 hours of use Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and...

Condition: used, mileage: 13,064 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 1,083 kg, empty load weight: 629 kg, number of seats: 1, first registration: 01/2011, emission class: none, suspension: other, Year of construction: 2011, operating hours: 13,064 h, driver cabin: other, fuel: electricity, Equipment: trailer coupling, Battery defective! The Linde P 60 Z tow tractor with trailer coupling is a used electric tow tractor, ideal for various industrial applications. It was manufactured in 2011 and has a mileage of 13,064 kilometers and the same number of operating hours. The tow tractor is equipped with an automatic transmission and is painted in a striking red color. This tow tractor has a 24V battery (5 TPzVPZV 500), but it is offered without a charger. The Linde P 60 Z has a permissible total weight of 1,083 kg and is designed for one operator, which enables its use in specific transport and towing tasks. In addition, there are various loading options to optimize transport. Kedpozt Aawjfx Ahhsdr An inspection of the tow tractor is possible without prior registration from Monday to Saturday. If interested, delivery can be arranged within Germany for an additional charge. Sale only to commercial enterprises (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Kdodpfsxdbvxox Ahhjr

Condition: excellent (used), Year of construction: 2007, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: DMB-500, total width: 1,000 mm, total length: 8,000 mm, total height: 2,000 mm, space requirement width: 2,000 mm, space requirement length: 10,000 mm, input current: 3 A, input voltage: 220 V, Dynamic booklet maker Configuration: 2 collating towers – 20 stations each (DC-10/60, serial no. 080100027 and serial no. 080100018) Stitching + folding system (DMB-500, serial no. 080100216) Trimmer unit (DMB-500T, serial no. 080100627) Max format: B3 Finished size: from 170 × 120 mm to 120 × 75 mm Counter: 4,000,000 booklets Condition: Fully operational, production-ready. Stitching heads and rollers replaced. Single owner from new. Professionally maintained and serviced by an authorized Duplo Poland service center. Location: Poland Kodpfezmgg Iex Ahhsdr Transport: available upon request EXW – buyer responsible for dismantling and collection Videos available upon request. If you are interested, we can arrange a live video inspection.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Standard accessories as per agreement Condition: Ksdpszgc Hwjfx Ahhedr Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia