Used Feldmühle Ceramic Indexable Inserts for sale (3,994)

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Pedpfx Alov Sthgswjrb Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Equipment: 3rd hydraulic function, Complete line for the production of stator and rotor packages, and an assembly line for assembling finished electric motors. The stator line consists of a manual workstation for producing packages, inserting slot insulation, inserting wedges, wire winding on a winding machine, a control machine, and a dielectric strength testing machine. The rotor line consists of a manual workstation for making rotor packages, a machine for applying insulating plastic, a machine for manual collector installation, a winding machine for wire winding, a manual workstation for rotor inspection, and a machine for rotor varnishing. Also included is an assembly line for assembling complete electric motors. The lines are sold in working condition and are ready for operation. Prjdpfx Alsz Epz Njwsb

Condition: new, !!! We have two units in stock. Price is for one unit only !!! The SAMSON Type 3432 is the Controller Station component of the SAMSON Type 3430 Series Pneumatic Indicating Controllers. It is primarily configured for industrial temperature and pressure regulation. The primary technical specifications for the Type 3432/3430 series from the SAMSON Technical Data Sheet include: Core System Configuration Device Framework: Operates as a chassis/base station (Type 3432) that houses modular inserts. Compatible Modules: Controller Modules: Type 3433 or Type 3434 (offering PI or PID control modes). Transmitter Modules: Type 3436 (for temperature with capillary sensors) or Type 3435 (for standard pneumatic signals). Prjdpfxez Ezywo Alwob Pneumatic & Operating Specifications Required Supply Pressure: Standard 1.4 bar (20 psi). Operating Air Pressure Range: Expandable from 2.0 to 12 bar (30 to 180 psi) when utilizing an optional integrated SAMSON Supply Pressure Regulator. Output Control Signal: 0.2 to 1.0 bar (3 to 15 psi) standard pneumatic analog output. Temperature Measuring Range: Typically –40 to 300 °C (depending on the installed capillary sensor transmitter). Front Panel Interface & Features Visual Indicators: Designed with high-visibility pointers displaying the Set point (w), Controlled variable/Actual value (x), Set point deviation, and Output pressure (y) simultaneously. Manual Overrides: Features an integrated Manual/Automatic (MAN/AUTO) switch alongside a dedicated manual mode adjustment knob. Bumpless Switchover: Equipped with a built-in differential pressure indicator to ensure seamless, bump-free handovers between manual and automatic loops. Mounting Enclosure: Built with a durable chassis optimized for wall, panel, or pipe mounting layouts. Brand new never used. Please check out our other listings as well.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Prodoz Efpcopfx Alwsb Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min Pedjx Emp Njpfx Alwjrb total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver Pedpfx Aoxmamuolwsrb with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: new, Year of construction: 2026, Equipment: documentation/manual, foot remote control, Indexing table, 1500 x 3000 x 200 mm Tabletop thickness: 22 mm, hole diameter: 28 mm with wireless handheld remote control Swivel range: 360° Height adjustment: hydraulic, motor range 800 to 1200 mm Pjdpfxjz D Af Se Alworb Speed: 0.5 RPM Motor power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity: 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Prjdpfx Ajz E Axzjlweb Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Glass thickness: Can process glass from approximately 4 to 19 mm. It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables.

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip Pedpfoxc Ip Ajx Alwjrb -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m -Thickness: 8 mm -Shipping/Price: complete -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg

Condition: excellent (used), Rotary indexing table Model C 315 k Diameter 315 mm Direct indexing: 15 degrees or indirect indexing via crank and indexing discs Podpfozdt N Dsx Alwsrb Height 135 mm Width 360 mm Depth 560 mm, with crank Weight 75 kg

Condition: excellent (used), Collet chuck/quick-change inserts Cone 38 mm Collet cone diameter max. 27.7 mm Collet cone diameter min. 24.2 mm Length 45 mm Psdpewf Ha Iofx Alwsrb Outer diameter 30 mm Stock number (28603)

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Podpfx Asz Eavwelwsrb Counter Spindle No

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Predpfsy Hizqex Alwjb Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, Podpfez Dv Tvsx Alwsrb punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.

Condition: good (used), Co-rotating center with cutting insert Manufacturer: Röhm Prjdsducpbepfx Alwjb Type: 506 VL MK 6 Overall length: 400 mm Body diameter: 120 mm Max. clamping force: 2000 c/oN Weight: 14 kg

Condition: used, Indexing table Sip Clamping surface diameter 300 mm Prsdocv S Nvjpfx Alwsb 8 T-slots, 12 mm wide Swiveling range 0 - 90 degrees Length 800 mm Width 600 mm Height 300 mm Weight 120 kg

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg Prsdpfx Aez Afhpjlwsb New - unused

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Pedpfx Ajz Dtbqjlwsrb Table with folded sheet feeder Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h 380V power supply + compressed air The machine has a central lubrication system. Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. We carry out an inspection by our staff or through your layout and video/photos of your system. Prodpfx Alsvgvy Iewsb    

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Prodpfx Ajxqmrfelwjb Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, Year of construction: 2009, operating hours: 69,500 h, machine/vehicle number: PR26, Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400–1000 mmTie-bar spacing (H × W): 900 × 1000 mmPlaten size (H × W): 1340 × 1410 mmOverall dimensions (L × W × H): 1000 × 2340 × 2400 mmWeight: 30000 kgOption: Electric dosing motorControl system: DIMIELAdvanced Automation & Control SystemsThe machine is equipped with a DIMIEL control system featuring a clear HMI for fast setup, monitoring, and optimization. Core-pull functions (2 + 2) and multiple air circuits are programmable to support complex molds and automated sequences. The integrated robot interface enables seamless connection to handling robots for part take-out, insert loading, or downstream packing, enhancing OEE and reducing cycle time variability. Safety interlocks, guarded access zones, and centralized control help operators maintain stable, repeatable processing with quick parameter adjustments and recipe management.Production Line Integration CapabilitiesThanks to its robot interface and flexible I/O, this injection molding machine integrates smoothly into plastics manufacturing cells feeding beverage production and industrial packaging workflows. It supports inline or standalone operation and pairs well with resin dryers, loaders, mold temperature controllers, and quality inspection systems. For PET preform applications, it can be positioned upstream of stretch blow molding machines that supply PET bottles to used bottling line and second hand packaging machinery.Machine Condition & Maintenance HistoryThis unit is a second hand machine with 69500 operating hours. It is presented in working condition and ready for operation, suitable for facilities seeking reliable capacity expansion without the lead time of new equipment. The robust Negri Bossi Vector platform and the electric dosing motor option contribute to stable performance and efficient plasticizing o... Predpfxjziyzde Alweb

Condition: excellent (used), Year of construction: 2014, Tilting table with air cushion Maximum glass size: 6000 x 3300 mm In very good and clean condition Good working order, tested As is Pedpoy Nagcefx Alworb Available immediately

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Pedox Ecwmspfx Alwerb Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested Pjdpfexlq Nwsx Alwjrb As is Availability immediate

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Pjdewzmu Ropfx Alwjrb Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...