Used Festo Dnu-63-500-Ppv-A for sale (78,610)

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: Bodpfxeq Nx Nno Af Aedh - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC frequency converter -Type: SK500E-111-340-A -Power: 1.1 kW -Input: 3AC 380/460V 47/63Hz -Output: 3 AC 0-Input V 0-400 Hz -Control Box: SK TU3-CTR -Dimension: 270/70/H160 mm Bdjdpfx Aepcmt Esf Aoh -Weight: 1.7 kg

Condition: new, Year of construction: 2025, Kreuzmayr PA 500 Bodpfeb Ilnyox Af Aodh pasteurizer for fruit juices, with pipe in pipe heat exchangers, including oil-fired boiler, temperature control, juice pump, mounted on stainless-steel chassis throughput: 500 l/h from 10°C to 80°C

Condition: refurbished (used), Year of construction: 2025, Schaudt A500 500-2500 Grinding length: 500 / 750 / 1,000 / 1,500 / 2,000 / 2,500 mm Bdoded Hfd Njpfx Af Ajh Center height: 150 mm / 180 mm / 225 mm Workpiece weight: 300 kg / 500 kg Additional optional features: - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive including DUO control (cycle-controlled) - "Workpiece storage" for 10/15/30/50 workpieces - Mini handheld control unit for Duo control - Glass scale in X and Z axes - In-process gauging - Frequency converter for external grinding spindle - Swiveling internal grinding unit - Frequency converter for internal grinding spindle - CE marking in conjunction with partial or fully encapsulated splash guard - Remote maintenance - Matching coolant / extraction system - Grinding wheel flange / changing arm - and much more We can also overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Bjdpfey Sumvsx Af Asdh Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: used, mileage: 3,70,000 km, power: 375 kW (509.86 HP), first registration: 04/2014, fuel type: diesel, overall weight: 26,000 kg, emission class: euro5, loading space length: 6,400 mm, loading space width: 2,400 mm, loading space height: 1,200 mm, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Volvo FH 500 Registration: km Bdedpszyxpujfx Af Aoh 6x4 Driven, liftable third axle I-Shift transmission EEV (Enhanced Environmentally friendly Vehicle) Large axle ratios Flatbed 640cm x 240cm, sideboards 120cm Crane: Atlas 240-A5 Year of manufacture: 2014 3700 hours 5x hydraulic extensions 5+6 control circuits - grab control Remote control Hook height approx. 18m Registration in Austria ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 EUR Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 2,23,294 km, power: 160 kW (217.54 HP), first registration: 11/2006, overall weight: 11,990 kg, axle configuration: 2 axles, color: yellow, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Unimog U 5000 Doka with Palfinger Crane! Emission standard Euro 3 WITHOUT AdBlue Body/Crane: * Flatbed with aluminum sideboards, * Palfinger crane PK 10502, year of manufacture 2006, * Preparation for remote control, * 4-point outrigger, * Work and auxiliary lights, Reach/Lifting capacity: * 4.1m = 2,170 kg * 5.6m = 1,450 kg * 7.6m = 980 kg Equipment: * Double cab, * Air conditioning, * Auxiliary heater, * 6 seats, * Driver's suspension seat, * Passenger single seat, * 4-seater bench in the Doka area, * Engine brake, * Differential locks, * Trailer hitch with continuous braking system, * Tires 445/70 R24 "MPT", Other: * Originally delivered in Germany, * 1 previous owner, energy supplier, * Engine version Euro 3 with 160 kW, * MB data confirmation available, Condition: * Vehicle with signs of wear and tear, * Rust * Crane/outriggers malfunction/not functioning, Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near Bremen. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles available from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! Bdodpfx Afezyww Ds Aoh We are interested in taking your commercial vehicle/construction machine in trade. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Bjdpfx Afjzvwpls Asdh Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Bjdpfxszwlzfe Af Ajdh Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm

Year of construction: 2025, condition: used, New: Yes Empty weight: 110 kg Dimensions of cargo space: 60 x 40 x 200 cm CE mark: yes Serial number: 250113 Bdedpszyk Ntofx Af Aeh Please contact Team DPX for more information

Condition: used, Year of construction: 2001, Technical details: Bjdpfxjyv Ha As Af Ajdh turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Bdsdpfxsyf Ha Hj Af Aeh Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: like new (used), mileage: 1,90,000 km, Year of construction: 2023, FORD F-MAX 500 Year 2023, ADR, 190,000 km, automatic transmission, retarder, dual fuel tanks, spoiler, side fairings, 70% tyres, double bed, fridge, national vehicle, still under Ford warranty, leasing available on site. Bdjdpfx Afeylvdzo Ajh

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria Bdjdpfx Ajxmrwfjf Aoh ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: ready for operation (used), Festo EGC-HD-160-3400-TB-0H-GK / 556824 toothed belt axis – total length: 3.80 m, used, in good condition, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Bedpfx Afox Ermye Aedh

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servo motor 2093107 H9 SN: 3S7PLKFNKLX, used, in good condition, 100% functional, delivery as per photos. Bdsdjx Ernqspfx Af Ajh

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servomotor 2093107 H9, serial number: 3S7PLKFS6LL, used, in good condition, fully functional, scope of delivery as per photos. Bdedpfx Afsx Ernwe Aoh

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Bedpfxoxbzbpe Af Aodh Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: excellent (used), Year of construction: 2008, Load capacity: 15 tons Double-sided cable drum Cable diameter: 8 mm, with 6 strands Fine adjustment Lifting height: 8.5 meters Bdodpfx Ajimhcbof Ajh

Condition: used, functionality: fully functional, mileage: 2,41,496 km, power: 368 kW (500.34 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Bsdpfx Asztm I Sof Aodh Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Battery 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear view camera: Without Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver attention support: NO Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver-side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 160mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system Fuel tanks capacity (left, right): 450L fuel tank - right hand side, 650 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 90 litre for 710mm diameter fuel tanks Additional roof lights: Without Tyres Front tyre 385/65R22.5, Drive axle tyre 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: NO Headlights: Halogen H7 Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, mileage: 5,12,595 km, power: 368 kW (500.34 HP), first registration: 05/2019, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Scania G 500 A4x2NA CG20 H VIN: 9256111 Chassis / Components: * Wheelbase: 3,750 mm * Leaf / Air suspension (2 bellows) * Tires: Front: 385/65 R.22.5, Rear: 315/80 R.22.5 * Remaining tread depth: Front: approx. 80% // Rear: approx. 50% * 1 x Aluminum tank 400 L * 1 x AD-Blue tank * 1 x Hydraulic tank Cab: * CG 20 H * 1 x Bunk * Refrigerator * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * Scania Infotainment Radio * Aux, USB, BT * Skylights / LED * 2 x Rotating beacons * 2 x Work lights * Scania-AEB = Emergency Braking Assist * Scania ACC = Adaptive Cruise Control * LDW = Lane Departure Warning Engine / Transmission: * 12,742 cc // 500 hp / 368 kW // EURO 6c * Scania retarder * Opticruise / Automatic transmission with 2 pedals Bedpfxjyx N I Ue Af Aedh * Differential lock * Dual PTO Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,641 kg * Payload: 10,359 kg Other: * German vehicle * 1 previous owner * New MOT inspection available upon request ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Day permits / Export license plates We will gladly help you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you in handling customs matters.

Condition: good (used), Year of construction: 2004, Demag ergotech extra 500-200 (2004) Bodjyyzuvjpfx Af Ajdh

Condition: used, Year of construction: 1997, max. turning diameter 460 mm Max. Turning length 1.000 mm control System - TX 8F max. Spindle speed 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 Bdedpoxbtpxjfx Af Ash

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Bsdpfxozzaz Is Af Aodh Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: good (used), mileage: 12,34,909 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,040 mm, total width: 2,550 mm, total height: 3,420 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Digital tachograph - Trip recorder (recording device) - Fixed - Manual - Auxiliary drive - Standard sleeper cab - Radio/cassette - Lane keeping assist - Xenon lamp = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 2550 kg, Gross vehicle weight: 27000 kg, Total fuel tank capacity: 510 liters, Trailer coupling, Axle pin diameter: 40 DIN, Chassis height: 101 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 12 tons, Suspension type: Air suspension, Type of cab: Standard sleeper cab, Cruise control, Trip recorder (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Violet, Heated mirrors, Type of lighting: Xenon lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, Central locking, Seat arrangement: 1+1, Seat upholstery: Leather, Seat adjustment: Manual, LOW ROOF, CLEAN CONDITION = Additional information = General information Color: Violet Registration number: KLEYN1 Transmission Transmission: VOL, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 2 mm; Tire tread depth left outer: 2 mm; Tire tread depth right inner: 2 mm; Tire tread depth right outer: 3 mm Axle 3: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 13 mm Weights Unladen weight: 2,550 kg Payload: 24,450 kg GVW: 27,000 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Bdsdpfx Aezr Uzwsf Ajh Number of keys: 1 = Company information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.