Used Galato Galato T35 Press for sale (12,637)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Dkedpozbxyqofx Akgon Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Dkjdpeza Hxrofx Akgon Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Dkjdozbxxaopfx Akgen Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Dksdezbxw Aspfx Akgon Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Dsdpfxezbxwij Akgjkn Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Djdpfxozbxvle Akgjkn Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), For sale: Hofer press in good working condition. Djdpox Rrw Nofx Akgekn

Condition: excellent (used), Year of construction: 2007, Window fitting press Djdpfot T Srpjx Akgekn

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Dodpfx Aet Uduxjkgokn

Condition: good (used), Year of construction: 1984, Automatic Press Factory Warszawa-Włochy TYPE PXS 100 Eccentric Press, pressure 100 t Dksdpew Uaxzofx Akgjn Year of manufacture: 1984

Year of construction: 1979, condition: good (used), Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos Dedpfx Akjzbirkegskn -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 65056, functionality: fully functional, pressing force: 5,000 t, stroke length: 900 mm, table width: 4,520 mm, table length: 2,150 mm, overall weight: 3,19,000 kg, Equipment: safety light barrier, Pressure build-up time: 3.6 s Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Dkedpfxoxb Tplj Akgsn Tool change device Mesh safety enclosure with light curtains

Condition: used, Year of construction: 2003, machine/vehicle number: 0-306-04-2737, working width: 800 mm, conveyor belt length: 4,800 mm, feed rate X-axis: 37 m/min, working height: 1,400 mm, working length: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! Dksdpey Uwmqjfx Akgsn The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 800 mm Workpiece length max.: 2,300 mm Workpiece height max.: 1,400 mm Feed rate max.: 37 m/min MACHINE DETAILS Machine length: 4,800 mm EQUIPMENT Infeed conveyor Outfeed conveyor The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8536

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Djdpozbhqxofx Akgjkn -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: used, Year of construction: 2017, +++ Attention: This item is part of an online auction! +++ Dksdpfx Aeza Ahijkgon

Condition: used, Year of construction: 2002, machine/vehicle number: 0-306-04-1262, working width: 600 mm, conveyor belt length: 3,000 mm, feed rate X-axis: 40 m/min, working height: 1,300 mm, working length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Dedpfoy Uv Iysx Akgekn Workpiece width max.: 600 mm Workpiece length max.: 2,500 mm Workpiece height max.: 1,300 mm Workpiece width min.: 120 mm Workpiece length min.: 300 mm Workpiece height min.: 300 mm Feed rate max.: 40 m/min Conveyor belt length: 3,000 mm MACHINE DETAILS Control system: NC 16 EQUIPMENT Unloading conveyor belt CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8535

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Dsdsywadwjpfx Akgjkn Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Erika Record Automat bread roll press TOP Erika Record Automat, 30-piece set Partially refurbished head New stainless steel blades With 3 forming plates Easy to clean Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Used machine, overhauled Dkjdpfsyurfmox Akgjn Warranty + spare parts service Visit our wide selection!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 345 kg, total length: 660 mm, total width: 620 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, machine/vehicle number: 2026, Equipment: start-stop system, New New Bread Roll Press NEW NEW TOP Fully automatic dough dividing and rounding machine Daub Model: 4-30 "The Original" with 3 rounding plates Dividing range: 40 to 130 grams/piece Dividing: 30 pieces with stainless steel knife Simple operation of the 10 programs User-friendly and easy-to-clean design! Dough ring with Teflon coating and "easy click" Reinforced press head Replaceable knife head Robust technology! Machine is mobile Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 620 x 660 x 1700 mm, W x D x H New machine & SAB certified With warranty + spare parts service Option: Dedpou Rzvgofx Akgokn Leasing & rental service Rounding plates Maintenance contract Service package Training & commissioning We have a large selection of bread roll presses in stock!

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes Dkjdpfsv Ak Npsx Akgsn - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control Djdpfx Ajza Eiiokgekn - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 12,113 h, pressing force: 36 t, Bending length [mm] 1020.00 Press force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Sturdy machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows Xpe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen - Network compatible - Teleservice via modem Safety - Side-swinging safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes - Ergonomics package, including: * Comfort support table (front) * Comfort footrest Djdpfx Akeza Dfisgokn * Work area lighting at the front (LED) - Productivity package, including: * Graphical workshop programming * Automatic Trumpf tool clamping * BendGuard safety device (with block laser) - Tool cabinet on the right

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 36 t, Bending length [mm] 1020.00 Pressing force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Robust machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 axis Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock speed - 1 GB RAM - 15-inch touch screen Dkjdpfx Ajza Dczokgsn Safety - Side-swinging protective doors - Rear protective cover - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting in front (LED) - 2 document holders Productivity Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser)

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,500 h, machine/vehicle number: 963, Universal Walking Vibropress for Multilayer Production: For efficient mass production of: - Small-format elements such as paving stones and blocks in multilayer production - Special elements such as curbstones, palisades, culverts, manhole rings, and relieving rings in single-layer production The machine is designed for the manufacture of large-scale vibropressed components. Production on vibrating table: Maximum production area: 1,240 mm x 1,000 mm Maximum product height: 650 mm Maximum product height in multilayer production: 250 mm Minimum product height in multilayer production (on pallet): 40 mm Maximum height (transportable) of multilayer package including pallet: 640 mm Production on the ground: Maximum production area: 1,240 mm x 1,240 mm Dsdpfx Aexz Egcskgekn Minimum product height: 250 mm Maximum product height: 1,200 mm

Condition: used, functionality: fully functional, Screw-type electric shelving press ITALPRESSE 2500x1200 mm Djdpeza If Tefx Akgokn Specifications: • Condition - used • Manufacturer - ITALPRESSE • Shelves with dimensions 2500 x 1200 mm • Max. clearance between shelves 500 mm • Straight, clean shelves, without dents • 2 screws with a diameter of 50 mm • Drive motor with a power of 0.75 kW • Original paint • Overall dimensions 285 x 120 x 160 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown illustrate the actual condition of the item for sale • Possibility to switch on and inspect the device on site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or a leasing loan