Used Gardner Spectro Guide for sale (4,738)

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Fpjdpfxovkw Dvj Ap Den Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Fpjdjz Euuzepfx Ap Djn

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Fodpfjizxbijx Ap Dspn Automatic hydraulic locks in all movements.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new Fodpfoz Hx T Rox Ap Dopn MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Sale – 5% Off New and fully operational CNC fiber laser cutting machine designed for fast and precise sheet-metal processing. The MTP F-6000 is equipped with a 6000 W Raycus laser source, an automatic-focus cutting head and a 3000 × 1500 mm worktable. The solid, heat-treated machine frame provides high rigidity, resistance to deformation and consistent cutting accuracy over many years of operation. The machine is suitable for production plants, metalworking companies and manufacturers of steel structures. KEY SPECIFICATIONS: • laser power: 6000 W • laser source manufacturer: Raycus • technology: fiber laser • wavelength: 1064 nm • working area: 3000 × 1500 mm • control: CNC • cutting head: Auto Focus • cooling system: water-cooled • power supply: 400 V, three-phase • operation: automatic MAXIMUM CUTTING THICKNESS: • mild steel: up to approximately 25 mm • stainless steel: up to approximately 16 mm • aluminium: up to approximately 14 mm • brass: up to approximately 8 mm • copper: up to approximately 6 mm The maximum cutting thickness depends on the type and quality of the material, the assist gas used and the selected cutting parameters. KEY FEATURES: • automatic-focus cutting head • CNC control system • precision linear guides • helical rack-and-pinion drive • rigid and stable construction • automatic central lubrication system • water-cooling system • fully enclosed protective housing • fume extraction system • emergency stop • CE marking STANDARD EQUIPMENT: • Raycus 6000 W laser source • Auto Focus cutting head • CNC control system • water chiller • extraction system • 3000 × 1500 mm worktable • protective enclosure • central lubrication system • documentation and operating manual • safety light curtain OPTIONAL EQUIPMENT: • air compressor • dust extraction system • automatic exchange table ADVANTAGES: • high cutting speed and productivity • excellent edge quality and repeatability • high positioning accuracy • low operating costs • simple and convenient operation • construction designed for industrial production APPLICATIONS: • sheet-metal processing and cutting • manufacturing of steel structures • automotive industry • HVAC and ventilation industry • production of enclosures, cabinets and metal components • serial and custom production MACHINE DIMENSIONS: Fpodpfsyv Dx Asx Ap Don • length: 8450 mm • width: 2950 mm • height: 2320 mm TRANSPORT: • free transport within Poland • transport to other European countries quoted individually Year of manufacture: 2026 Condition: new, fully operational Location: Fabryczna 1, 08-300 Sokołów Podlaski, Poland

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 20 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 740 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 3,800 kg, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, BRAND-NEW HYDRAULIC GUILLOTINE SHEAR 4 × 2500 E21S Controller and Laser Cutting-Line Guide The hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips. It is suitable for steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 4 mm and a working length of 2500 mm, it is an efficient solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, allowing quick and repeatable positioning. An illuminated laser guide clearly indicates the cutting line and helps the operator align the workpiece accurately before each cut. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces during handling. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 4 mm • Maximum cutting length: 2500 mm • Blade rake angle: 1°30′ • Cutting frequency: 20 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 2650 mm • Blade length: 2550 mm • Table height: 740 mm • Motor power: 5.5 kW • Weight: 3800 kg • Dimensions (L × W × H): 3130 × 2030 × 1600 mm • Controller: E21S Fpsdpfsyt E Aiox Ap Den • Cutting-line guide: Laser STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms • Front gauge with measuring scale • Rear safety guard • Front safety guard • Foot-control pedal • E21S controller • Illuminated laser cutting-line guide CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English This guillotine shear offers a practical combination of cutting capacity, operator-friendly controls, reliable sheet positioning and safety equipment. Its compact design makes it suitable for both general fabrication and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a transport quotation. Please visit our website to view our other available metalworking machines.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 10 mm • Maximum cutting length: 3200 mm • Blade rake angle: 1°30′ • Cutting frequency: 10 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 3450 mm • Blade length: 3300 mm • Table height: 800 mm • Motor power: 15 kW • Weight: 10,000 kg • Dimensions (L × W × H): 4050 × 2050 × 1950 mm • Controller: ESTUN E21S • Cutting-line indicator: Illuminated STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms • Front gauge with measuring scale Fpodjyt Itqepfx Ap Don • Front and rear safety guards • Foot-control pedal • ESTUN E21S controller • Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Fodpfx Ajz H I D Sep Dopn Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Fpodpfx Ajz H Dwnop Don Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar Fpsdpfx Ajz Hwt Asp Den

Condition: used, Year of construction: 2013, Technical details: turning diameter: 38 mm Article: CNC Long-turn automatic lathe Manufacturer: Hanwha Type: STL38H Year of construction: 2013 Control: Siemens 840SL for 8 axes Main spindle: max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48 Counter spindle: max. pick-up diameter: 38mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42 Tool turret: n max. 6,000 rpm Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder FMB Turbo 5-55 High-pressure station SFB-301 eco 150bar Please, contact us for getting more information and pictures on mail(at) or Fpsdpfx Apjtv Sdfo Den *

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: Fpsdex Enapopfx Ap Dsn • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: + One semi-automatic L-sealer Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Fsdpfx Ajxq Hcqop Dopn Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning Fpedpfxsz Ii T Ds Ap Den - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Belt length: 5,080 mm Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Material support height: 1,200 mm Roller diameter: 630 mm Fjdez Ilvzepfx Ap Depn MACHINE DETAILS Control: Siemens Simatic HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch • Steel worktable with adjustable side guides • Power cabinet, distribution board, and cable management • Mobile table with transport brake Fpodsud Rddspfx Ap Don Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, Fpodjzlaqkspfx Ap Don * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm Fedpowrw D Rsfx Ap Dspn blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table Fpodpeynm Ayefx Ap Den upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Fjdpfx Apsz E Sgue Dspn Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Fpjdpfoyu Uk Sex Ap Djn Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Fedpfx Apjw Dfnhs Djpn Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fjdpfjz D Evasx Ap Dopn Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: new, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics Fpedpfsu Nhbyox Ap Den - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting - Wall or free-standing installation possible - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Fpodpfezwnmqex Ap Den Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm