Used Gear Edge Deburring Machine for sale (70,980)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Nljdpfoxy Tm Isx Alhsc

Condition: used, Year of construction: 1988, Technical details: max. wheel diameter: 210 mm total power requirement: 60 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,85 x 2,60 x 1,80 m grinding slide feed: 700 mm Nsdpfx Alowrzutohslc grinding slide feeds: 1-15.000 m/min max. workpiece weight: 150 kg centre height: 260 mm grinding wheel diameter: 240 mm

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr. BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE Nledpswiryhjfx Alhsc We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Nsdpjza Ukiofx Alhjlc

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Nlodpfx Alsxc E H Sjhsc Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade Njdelht Hwopfx Alhjlc F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Nedpfx Alsd R Ev Dshelc • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Nlsdpfx Aslht Hzelhsc Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Nlsdpsi Am U Dsfx Alhec Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2025, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Nljdpfjhqadcsx Alhjc Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Nlsdjff Ed Tepfx Alhsc Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Nlsdpfsfig Rwsx Alhsc Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Nedpslht H Nofx Alhelc Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Nedpfx Aloy Iu N Ashslc Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available - Nledpjhqb Rcofx Alhec

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Nljdpfx Alsv Sk Nnjhoc On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Nlodsi Am Ukepfx Alhsc Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius scraper blade, corner cutter, surface scraper blade, finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue outlet device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combined version), corner rounding cutter, radius scraper blade, surface scraper blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray device for release agent Nlodpoi Anadofx Alhjc F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius scraper blade F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: In stock, 54634 Bitburg Available in calendar week: 4/2024

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Nljdpfxsxgvcxs Alhsc Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2014, 4-axis mitre grinding machine with water tank and pump. Width: 8300 mm Height: 3260 mm Nodpfx Aozd Sm Uolhjlc Depth: 1000 mm Condition: very good, second-hand

Condition: good (used), Year of construction: 1995, Model: Rotomat 180 Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Key components: - Main switch (Hauptschalter) – red knob 0/1 - Fault indicator (Störung) – error warning light - Power indicator (Spannung) – voltage control lamp Brush spindle speeds: - I: 800 rpm - II: 1,600 rpm Working width: approx. 180 mm (hence the “180” model designation) Type of process: Brush deburring (for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed settings: 2-stage (800 and 1,600 rpm) Dust extraction connection: Yes (extraction nozzle visible at rear) Safety features: Emergency stop, mechanical interlocks, fault signalling 🔹 Typical applications - Removal of sharp edges after laser cutting, stamping, or milling - Processing of small and medium metal parts - Surface preparation prior to painting, galvanising, or welding For sale: EWU Rotomat 180 Deburring Machine Offering for sale a brush deburring machine EWU Entgrattechnik Rotomat 180, year of manufacture 1995, made by Egon Wutzke (Germany). The machine is fully functional, used, newly serviced, and ready for operation. Technical data: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 Nsdpfx Alsw Uabioholc • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Spindle speeds: 800 / 1,600 rpm (2 ranges) • Maximum part size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter actual reading – shown in photo: 4451 h] • Equipment: dust extraction nozzle included Applications: • Deburring and edge rounding of pipes, profiles, steel and aluminium parts • Edge processing after cutting, stamping or milling • Surface preparation prior to painting, galvanising, or welding Condition: • The machine is in good technical condition • Fully functional electrical systems and controls • Ready for work, on-site inspection possible

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Nljdpfx Aex Ht Rvjlhsc

Condition: used, Year of construction: 2022, 2 x 400 mm magnetic track, Nljdpezd Nwdjfx Alhec EMZR (presumably an abbreviation, context needed for accurate translation), Tool wear compensation EE

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Njdpou Ngfqsfx Alhslc Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Brushing machine / brush deburrer Nlsdpfou Nu Rnex Alhec - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW *