Used Graule - Sofort Verfügbar - Zs 200 Nf - Sofort Verfügbar - for sale (17,926)

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release Hedpok Dpp Sjfx Akrsnu - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: Hnjdpfx Akjxabztjreu 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: good (used), Foldmaster 200 SA Automatic Folding Machine This is the latest product from the Swiss company Multigraf AG. The machine is in good working order and ready for production. Equipped with new rollers. Features 2 folding plates that are electronically adjusted via a control panel, allowing for very fast setup and high precision. Includes a pneumatic feed system and soundproofing. Comes with accessories, including: Hedpfx Akez S Uw Rjrsnu an operating manual and a creasing kit. Ideal for the pharmaceutical industry due to its small minimum fold size. Electric delivery system with infinitely variable delivery speed. Infinitely variable folding speed. Power supply: 230V. Becker compressor. Format: 35 x 55 cm. The control unit/counter performs the following functions: • setting a specific batch size; • setting the duration of the pause between individual batches of sheets; • displaying the total quantity of processed material; • displaying the operating speed (units per hour); • programming the suction duration; • programming the pulse duration for the spacing between sheets. Paper weight range: 40–240 g/m². Throughput (A4 format): up to 30,000 sheets per hour.

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and Hnedpfx Aobtnf Eokreu gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Hnedpfxsxabqzj Akrsu Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: new, | Interchangeable roll-off platform for construction machinery or similar | Payload approx. 14 tons | 6.50 m x 2.50 m | Tare weight approx. 2000 kg | New and immediately available | Subject to errors and prior sale. Hodpjzbuizjfx Akronu

Condition: new, empty load weight: 6,020 kg, maximum load weight: 27,980 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 3-axle steel segment tipper | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | External tailgate | Tyres: 385/65 R 22.5 | Steel round body 7,650mm x 1,470mm | Floor made of 5mm HB 450 | Side walls made of 4mm HB 450 | Front platform | Unladen weight: 6,020 kg | Rolling tarpaulin | Subject to errors, input mistakes, and prior sale. Hnodpsywywkofx Akrju

Condition: excellent (used), Year of construction: 1999, CHAIN FILTER Hsdjz R Eh Dopfx Akrenu Maximum filter capacity : 30.000 m3/h ATEX Approved 4 x Dust extraction Fans, 15 Kw each. ( All 4 frequenz controlled ) Filter measures : L 6700 x W 2400 x H 4200 mm ( Without legs : H 3300 mm, will fit on a low truck in 1 section ) Cross air unit included Filter + fans has always been located inside, so the condition is very good.

Condition: new, empty load weight: 6,050 kg, maximum load weight: 27,950 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, | Schwarzmüller K-Series 3-Axle Steel Dump Body | Volume: approx. 25 m³ | ABS / EBS | 9-ton SAF axles with disc brakes | Full air suspension | External flap | Tires: 385/65 R 22.5 | Steel round dump body 7,650 mm x 1,470 mm | Floor made of 5 mm HB 450 steel | Walls made of 4 mm HB 450 steel | Platform at the front | Tare weight: 6,050 kilograms | Roller cover | Subject to errors, typos, and prior sale. Hedpfx Akszk Ikiorsnu

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 44, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,480 kg, maximum load weight: 5,320 kg, overall weight: 17,800 kg, fuel consumption (urban): 1,220 l/100km, emission class: euro6, color: white, suspension: air, tire size: 275/70 R22,5, total length: 12,200 mm, lifting height: 3,200 mm, Equipment: ABS, air conditioning, cruise control, parking heater, Unladen weight: 12,480 kg, permissible total weight: 17,800 kg, 32 standing spaces, tire size: 275/70 R22.5, 1st axle: , 2nd axle: , air suspension, air conditioning for passenger compartment, digital destination display: Lawo, auxiliary heater: Spheros Thermo + 300 with preheating for nozzle, air conditioning for driver's area, stop request button, wheelchair space, stroller space, leather steering wheel, fog lights, level adjustment, kneeling function, power steering, tire pressure monitoring, floor covering: Pegulan, LED headlights, electrically adjustable exterior mirrors, electronic brake system (EBS), stop brake, sunroof, twin tires, reversing camera, sun visor, speed limiter, microphone, wheelchair ramp, digital instrument cluster, non-binding offer, errors and prior sale excepted. Image may not correspond to the offer. New vehicle, immediately available, various configurations. Hnodpfez Idafox Akrju

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: BÄR vertical, load capacity: 2000 KG ? Platform of the tail lift at full height ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation Hedpfx Aslxwr Iekrsnu ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: new, maximum load weight: 29,731 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,580 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer K.SPS platform semi-trailer Immediately available Technical data: * Outer length 13,640 mm * Internal length 13,580 mm * Axle distance 1,310 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Inner width 2,480 mm * Gooseneck 200 mm * Semi-mounted height 1,180 mm * Axle load 27,000 kg * Kingpin capacity 12,000 kg * Total weight 39,000 kg * Unladen weight 6,269 kg * Pallet capacity 33 Euro pallet load capacity Hsdsqbn R Nspfx Akronu Chassis: * BPW axles with air suspension and disc brakes * 1st axle can be lifted automatically * Wabco brake system * 6 tires 385765 R22.5 * Axle pressure gauge Chassis: * Made of high-quality and durable steel * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * Hardwood-coated, 30 mm thick and waterproof hardwood floor, which can take an axle load of 7,200 kg in accordance with DIN EN 283. * Jost supports * LED lighting * Load securing. * K-fix has 96 holes per side, each lashing point has a load capacity of 2,500 kg * Additional 7x2 lashing rings placed on the floor with a load capacity of 5,000 kg * 6x2 container locks suitable for 1x20 ft in the middle, 2x20 ft, 1x40 ft containers * Stake pockets outside + on the floor * Stake box under chassis * Load securing certificate according to standard EN 12642 CodeXL Miscellaneous: * 1x stainless steel toolbox * 4x extra wide boards with LED lighting Chassis color: MB 7350 nova grey For further information please do not hesitate to contact us

Condition: ready for operation (used), Heidelberg Finishing Heidelberg TAS350 section feeder -2005 Hedpfx Aeir A Ngskronu

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information Hodjtu T I Uepfx Akrsnu

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm Hnodpeu Ng Sdjfx Akrju - coolant device available *

Condition: used, Technical details: Hjdpfxsu N Dmxj Akronu weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Year of construction: 1974, Technical details: voltage: 220 V clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate Hodpfx Aksu N D Ntorjnu 120 watts 13x induction loops, width 20mm spacing 43mm *

Condition: used, operating hours: 4,808 h, mileage: 72,259 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Condition, see photos * Only 4,808 operating hours * EasyDrive (Hydrostatic drive) (SN) * Ideal for footpaths, bicycle paths, and narrow lanes * Schmidt Swingo, multiple units available * 2 rotating brushes at the front, 800mm width * Sweeping width: 2,800 mm * Extension device at the front * Total water volume 360 liters * Fresh water volume 180 liters * Opening and tilting the container via cable remote control * Air conditioning * Engine VM 56C/9 * Rear view camera * Heated seat * Radio * Air-suspended driver's seat * All-wheel steering can be engaged * 2 seats * Sweeping material container 1.8 m³ * Rotating beacon lights * GVWR 3,500 kg * Unladen weight 2,850 kg * Payload: 1,650 kg * Self-propelled working machine If a new TÜV (German technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety inspection), or a new UVV (accident prevention regulation) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: Hnodpovhqmlefx Akreu We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale, and errors reserved.

Condition: used, machine/vehicle number: 2502, DESCRIPTION Parting head, manufacturer Walter Type HT 200 U Center height 200 mm Mounting taper SK 50 Spindle diameter 130 mm Hnodpfec Tuyrex Akrju Weight 260 kg Space requirement: W 500 x D 650 x H 450 mm DMT0Z2OCZN9

Condition: used, Safety chuck for rotary tables Diameter 200 mm Hnodpfodb Uy Ijx Akrju Bolt circle 133 mm Taper 106 mm

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Hjdpfxodzqbvo Akronu Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Gehrungs-Kapp u. Schiftersäge Graule ZS 170 N Baujahr 2025 3 KW links u. rechts schwenkbar 60° u. 45° links neigbar bis 45°, nach rechts bis 25° mittels Handkurbel von hinten 1 Maschinenständer 1 Sägeblatt Hnedocyd N Hjpfx Akrou 6000mm Ablängrollenbahn mit Skala u. Anschlag, Anbauseite links 4000 Zufuhrrollenbahn, Anbauseite rechts viele diverse Optionen auf Anfrage

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 25-200 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -large measuring surfaces Hnjdpfx Akjb A Sx Uorou -Measuring force: Ratchet -Including case -Adjustable dimensions -Hand protection -Key Other sizes also available -Weight: 5 kg

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm Hodst I D Thepfx Akrsnu pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz Hedpfx Asb A E U Sokrjnu -Power: 7.5 kVA -for: Edge bander, edge banding machine -Weight: 105 kg