Used Gwk Teco Cs 140E for sale (2,481)

Condition: used, empty load weight: 7,440 kg, maximum load weight: 31,560 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Features: Alloy wheels, 3 axles, BPW axles, air suspension, first axle liftable, last axle steered, raise/lower function, ABS (anti-lock braking system), Edscha sliding roof, curtain sides, doors, coil well, lashing rings, underrun protection, lateral aluminum side guards, support legs, storage box. Superstructure: Krone trailer with sliding curtains on both sides, coil well and Edscha sliding roof, 3x 9t BPW axles, first axle liftable, disc brakes, coil well approx. 8,840 mm long, 10 pairs of heavy-duty lashing rings recessed in the floor, stake pockets 81 x 81 mm in the outer frame, 30 mm thick waterproof flooring, Edscha sliding roof, Multilock outer frame with universal load securing options every 100 mm, steered trailing axle lockable! Clear loading height at rear portal approx. 2,600 mm! Corner dimension approx. 2,040 mm! Unladen fifth wheel height approx. 1,150 mm! Spare wheel available for an extra charge! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Lsdpjwzyq Ejfx Ag Aoaf

Condition: used, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2011, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 93 m³, suspension: air, tire size: 445/45R19,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 3-axles, BPW axles, air suspension, lifting+lowering, ABS (anti-lock braking system), Edscha, curtain, portal doors, coil trough, lashing eyes, U-protection, lateral aluminum driving protection, supports, lifting roof Superstructure: Krone platform trailer with sliding tarpaulin left & right, Edscha roof, coil trough & hydraulic lifting roof, approx. 93m³ 3x 9t BPW axles, disc brakes, Multilock outer frame with universal load securing option every 100mm, coil trough approx. 7236mm incl. 4 pairs of stake pockets, 10 pairs of heavy-duty lashing rings embedded in the floor, 30mm thick & waterproof glued panel floor, Edscha roof, diagonal bracing in the roof, hydraulic lifting roof with 450mm total lift at 4 corner stanchions can be lifted separately, light metal container door, 1 PVC tarpaulin on top with rollers for moving, ADR flame-retardant roof tarpaulin, loading height in rear portal 2745mm, semi-mounted height approx. 970mm, unloaded loading height approx. 1122mm. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Laedpfxevhld Ss Ag Ajf - .

Condition: new, Year of construction: 2024, 1 cloos welding robot qirox 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot 5 m Gasnozzle sensing, seam tracking, point editor Pedastal for robot Ledpodkcrgjfx Ag Ajaf Cloos welding machine next 452 ( 450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning tilting devices WP TS-50 load capacity/station 500 kg, swing radius 800 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: 12-14 weeks. Subject to prior sale.

Condition: used, mileage: 7,07,975 km, power: 235 kW (319.51 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 13,700 kg, maximum load weight: 12,550 kg, overall weight: 26,250 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, loading space volume: 54 m³, loading space length: 8,920 mm, loading space width: 2,523 mm, loading space height: 2,436 mm, Equipment: ABS, air conditioning, cabin, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Mercedes-Benz Antos 2532 E6 with Carrier refrigeration - Freezer box - Dimensions (L x W x H inside): 8.92 x 2.52 x 2.43 m - Refrigeration unit: Carrier Supra 1250 MT - Power connection - Air conditioning - Tail lift - Roller shutter door - Automatic transmission - Air suspension - Payload: 12,550 kg - Tires: 315/70R22.5 Very good condition! Export price! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders; therefore, our listings always include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase agreement are decisive. Subject to changes, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português Lodpfx Agsy I Abaj Aeaf - Parliamo italiano

Condition: used, mileage: 2,75,218 km, power: 162 kW (220.26 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 8,110 kg, maximum load weight: 3,790 kg, overall weight: 11,900 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space volume: 36 m³, loading space length: 6,500 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Equipment: ABS, cooling unit, cruise control, onboard computer, soot filter, tail-lift, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend across national borders, which is why you'll generally find the export price listed in our advertisements—this price applies regardless of where the vehicle will be used. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures regular updates. This information is intended as non-binding general information and does not replace a detailed, individual consultation when making a purchasing decision. Only the provisions contained in the purchase contract are legally binding. Subject to change, errors, typographical errors, and prior sale. Ljdpfeyv Hmpjx Ag Asaf Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ???? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: excellent (used), Large flanging device Make Trumpf Lasdpfxsu Nuyce Ag Aof Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles * Hydraulic loading ramp * Hydraulic supports * Winch * Remote control * Edscha cover Ljdpjwz Dm Dofx Ag Ajaf -----Internal vehicle number: 11079----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Laedpfx Aopcht Heg Aef

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Lsdpfx Ageuycgfe Asaf - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Total power requirement 3 kw Ljdpevz Eg Hjfx Ag Aoaf

Year of construction: 2016, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 09144PER2A, Refrigerating scroll compressor Trane CSHC 093R0A0S Technical data: ♦ Positive displacement refrigerant compressor ♦ Scroll compressor ♦ Hermetic compressor, internal motor ♦ Compressor model & development sequence ♦ 3500 rpm vertical welded steel shell Designates size - nominal tons = 9.3 tons Voltage designator 208/230-60-3 Number of cylinders that unload zero -no unloading Design sequence (alpha). Factory assigned prints on the nameplate. Unloader control and method of unloading - no unloading; Basic compressor variation: 1 Braze copper-clad refrigerant connections 2 Rotalock oil equalizer fitting with threaded cap The principles of operation: The suction gas is drawn into the compressor. The gas then passes through the gap between the rotor and stator, cooling the motor. The gas then enters the intake chamber, which encircles the scrolls. The oil in the suction gas is separated by changing directions and impinging on surfaces within the compressor and then draining back to the oil sump. Finally, the suction gas is drawn into the scroll assembly where it is compressed and discharged into the dome of the compressor. The dome of this compressor acts as a hot gas muffler which dampens the pulsations before the gas enters the discharge line. How the Scroll Compressor Trane Works General A 3-D compressor has two scrolls. The top scroll is fixed and the bottom scroll orbits. Each scroll has walls in a spiral shape that intermesh. Inlet - First Orbit As the bottom scroll orbits, two refrigerant gas pockets are formed and enclosed. Compression - Second Orbit Ledpfxofm A Dms Ag Ajaf The refrigerant gas is compressed as the volume is reduced closer to the centre of the scroll. Discharge - Third Orbit The gas is compressed further and discharged through a small port in the centre of the fixed scroll. Price: 1.000 Euro + TVA, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Quick change device Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Errors excepted Lsdpfx Ageqt Dwfo Aoaf

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with Lsdoy A S U Sopfx Ag Aeaf tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Ledpfx Asvq Rireg Aeaf We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-Compartment UN PORTABLE T11 Bottom discharge Steam heating 5-Year + CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, waste water, and sewage Weights Tare weight: 3,820 kg Payload: 24,930 kg Gross vehicle weight: 36,000 kg Lajdpfx Aezap R Rsg Aef Functional Interior capacity: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for further details.

Year of construction: 1990, condition: ready for operation (used), travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 17,000 mm, controller manufacturer: HEIDENHAIN, controller model: T355A, spindle motor power: 14,700 W, spindle speed (max.): 1,207 rpm, table length: 6,000 mm, table width: 1,060 mm, number of axes: 3, This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details. • Working table • T-slots: 6 on table + 2 lateral • T-slot width: 22 mm • Distance between T-slots: 175 mm • Max permissible load: 8 tons per meter • Axis travels • X (longitudinal column): 4,300 mm (variants: 2,300 / 3,300 / 4,300 mm) • Y (ram cross): 1,000 mm • Z (vertical head): 1,700 mm (variants: 1,200 / 1,700 mm) Laodpfxjyi A Eys Ag Asf • Spindle • Constant torque range: 10–249 rpm • Spindle diameter (front bearing): 90 mm • Feeds • Micrometric feed rates: up to 4,100 mm/min • Working feed rate: up to 4,200 mm/min • Rapid traverse: up to 4,600 mm/min • Drives & motors • Spindle motor: Thyssen, DC • Axis feed motors: Servomac • Lubrication and hydraulic pumps: Sever / Willi Vogel • Cooling system: dedicated headstock oil cooling • CNC control • Heidenhain T355A • Control unit: BE 412 B Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Condition: Ledpfx Ageqydw Ie Asaf This offer is for a used device that may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Manufacturer: Camfil KG Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2 Lajdpfxeyrnfws Ag Asf

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 280 mm, turning length: 1,430 mm, turning diameter: 500 mm, spindle bore: 82 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,430 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 7 rpm, rotational speed (max.): 2,200 rpm, total height: 1,620 mm, total length: 3,330 mm, total width: 1,750 mm, quill diameter: 75 mm, quill stroke: 150 mm, overall weight: 2,700 kg, chuck outer diameter: 250 mm, spindle nose: CAMLOCK D1-8, center height: 250 mm, bar diameter (max.): 82 mm, Controller FANUC 0i-TF Plus (5) Fanuc manual guide 0i 3-jaw self centric chuck dia 250 mm (manual clamping Spindle motor with frequency regulator 7.5 kW 4-tools electric turret Tailstock with quill MT4 Fully enclosed splash guard Coolant system with tank Laedpfx Asxxyhceg Asf Automatic lubrication system Safety switches on the doors Formal CE norm for EU

Condition: used, Year of construction: 2000, x-travel 4300 mm y-travel 1000 mm z-travel 1700 mm Control TNC430 ja Lodpfsyhhvhox Ag Ajaf

Condition: excellent (used), functionality: fully functional, Condair humidifier, Currently still in use in an office building. Dismantling scheduled for mid-September. Length: 1,600 mm. Width: 710 mm. Height: 1,700 mm. Lasdpfx Agsy Aluro Asf Estimated year of manufacture of this machine: November 2018.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Lajdpfx Ageyhn Uqs Aef

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Laedjwdm U Nopfx Ag Aef Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Model: UNO C-CS Year of manufacture: 1989 Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Lsdpfxjy H N Taj Ag Asaf Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: like new (used), Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: siehe Bildmaterial, total length: 4,500 mm, total height: 1,400 mm, total width: 1,550 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 50 mm, product length (min.): 400 mm, product length (max.): 600 mm, product width (max.): 400 mm, product width (min.): 250 mm, input voltage: 400 V, working height: 800 mm, We are offering this as-new Smipack / Saropack production line consisting of the GHS1000/400, WS 6000 CS, and T450 (conveyor belt/sealing station/heat shrink tunnel), with all components manufactured in 2022. Last maintenance was carried out in 09/2025. Shrink Wrapper WS 6000 CS Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 3350 W Current: 14.5 A Conveyor Belt GHS 1000/400 Phase Connection: 1 + N + PE Voltage: 220–240 V Frequency: 50–60 Hz Ledpfx Asytcc Hjg Aoaf Power Consumption: 370 W Current: 1.8 A Shrink Tunnel T450 Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 8000 W Current: 11.5 A If you have any questions or require further information, please feel free to send us a message or give us a call.