Used Height-Adjustable Desk for sale (44,801)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Bdsdpfxox Tq S Dj Af Ajh

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. Bdedpfez Dtaajx Af Aoh This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, Diesel-powered forklift, compact forklift, MORA Type M80CS Manufacturer's No. 20087, Year of Manufacture 2006 Rated load capacity: 8 tons Lifting height: 3800 mm Fork length: 1800 mm Fork carriage width: 1460 mm Overall height: 3030 mm Overall width: 1460 mm Overall length without forks: 3350 mm Self-weight: 12740 kg - Duplex mast with 1950 mm free lift - 4-cylinder PERKINS diesel engine - Fully enclosed cab with heater - Electro-hydraulic tilting mechanism for the cab - Hydraulic power steering - 2 work lights at the front, 1 work light at the rear - Yellow warning flashing light on the protective roof - Solid rubber tires (front: 28 x 10 x 22, rear: 250/70 - 16) Bodpfx Afsitv Rde Asdh - 9646 operating hours recorded - New UVV/TÜV inspection passed Good condition Rental available upon request.

Condition: used, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance forklift, electric forklift, compact forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture 2008 Rated capacity 2500 kg Capacity at 500 mm load centre 2500 kg Lift height 4340 mm Overall height 2220 mm (container compatible) Mast height 2220 mm Free lift 1600 mm Fork length 1150 mm Fork width 100 mm Fork thickness 40 mm (actual 38 mm - at heel 35 mm) Fork carriage width 1030 mm Operating voltage 80 Volt - 4-wheel, superelastic, solid rubber tires front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free lift mast Bodpfx Afot Ac Ere Aodh - Sideshift - Overhead guard - Drive battery HAWKER, 80 Volt, 560 Ah, year of manufacture 12/2022, supplied with automatic charger - Operating hours counter shows 2969 hours - New UVV safety inspection by TÜV (additional cost 150,-- EUR net) Length without forks 2400 mm Overall width 1190 mm Own weight with battery 4800 kg Good condition

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Bedpfx Afjytnftj Asdh Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Automatic material feeding Touchscreen control panel Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: used, functionality: fully functional, mileage: 3,49,852 km, power: 353 kW (479.95 HP), first registration: 08/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Bjdpfez Agk Eox Af Asdh Battery, 12 V, 230 Ah, 2 units, maintenance free. Three-phase alternator 28 V, 120 A, 3,360 W, LIN. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque. Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 7 mm Front right - 7 mm Rear left inner - 6 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: excellent (used), I will sell a conveyor belt in very good condition. - Brand Euroflex - 5.3m/min - Length 300cm - Width 50cm Bjdevyllgjpfx Af Aodh - Working height 85cm + 20cm adjustable legs. - Power supply 400V

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516342V00017, Year of construction: 2019, operating hours: 13,119 h, load capacity: 7,000 kg, lifting height: 3,520 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lifting height: 3,520 mm Fork length: 2,400 mm Maximum fork width: 1,930 mm Minimum fork width: 560 mm Number of wheels: 6 Bodpfx Afez D Urke Asdh MACHINE DETAILS Mast type: Duplex Fuel type: Electric Battery brand/type: Still Battery year of manufacture: 2019 Battery voltage: 80 V Battery capacity: 1,240 Ah Battery test result: 65% Operating hours: 13,119 h Dimensions & Weight Dimensions (L x W x H): 3,750 x 2,000 x 2,920 mm Shipping weight: 12,414 kg Number of shipping packages: 1 EQUIPMENT Side shift 4-way fork spreader Work lights Full cabin Heater Documentation CE marking

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. Bdodpsu N Dgljfx Af Aeh *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds Bdsdpjxu Dxqsfx Af Aeh -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! Bodjx Adbnopfx Af Aodh *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) Bdodpfx Afev A Sqhj Aoh *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U Bdodpov S Ay Sofx Af Ash weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: excellent (used), Catalog number: 7973 TECHNICAL DATA - Inlet width: 410mm - Inlet height: 210mm - Shaft width: 430mm - Shaft diameter: 330mm Bdjdpszw I Hkjfx Af Aoh - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 50x50mm - Toothed drawing shaft (bottom) - Lower shaft motor: 1.1kW - Toothed drawing shaft (top) - Upper shaft motor: 1.1kW - Vibrating screen - Vibrating screen length: 4160mm - Vibrating screen width: 370mm - Main motor: 45kW - Auto-reverse (adjustable) - Reverse gear - Overall machine dimensions (L/W/H): 2150x1450x1050mm - Overall vibrating screen dimensions (L/W/H): 4160x650x880mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload - Reverse gear - DTR documentation - Used shredder, very good condition Net price: 73900 PLN Net price: 17186 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Bjdpfx Afsz Ebbzs Aedh Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 3,000 mm, spindle speed (max.): 1,120 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 315 mm Turning diameter over bed: 630 mm Turning diameter over slide: 400 mm Distance between centers: 3,000 mm Bed width: 580 mm Spindle bore: 82 mm Spindle speed: 9–1,120 rpm MACHINE DETAILS Control system: Conventional Power: 18.5 kW DIMENSIONS & WEIGHT Dimensions (L x W x H): 4,500 x 1,600 x 1,500 mm Net weight: 5,000 kg Shipping packages: 1 unit Bdedpez Ebcrjfx Af Aoh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 850079, Year of construction: 2006, operating hours: 11,220 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 4,500 mm Bdsdpfx Aoz D Uxdof Ash Free lift: 1,410 mm Fork length: 1,220 mm Minimum fork width: 240 mm Maximum fork width: 1,240 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Engine manufacturer: Isuzu Operating hours: 11,220 h Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,260 x 2,120 mm Unladen weight: 4,710 kg EQUIPMENT Side shift Free lift Work lights CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: U0674210, Year of construction: 2010, operating hours: 5,686 h, load capacity: 2,600 kg, lifting height: 5,440 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,440 mm Lifting capacity: 2,600 kg Fork length: 1,200 mm Minimum fork width: 300 mm Maximum fork width: 1,000 mm Number of wheels: 4 Tires: Pneumatic tires MACHINE DETAILS Bedpfx Afjz D U Rae Aedh Mast type: Triplex Drive: Diesel Engine manufacturer: Chalwyn Operating hours: 5,686 h Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,250 x 3,010 mm Unladen weight: 5,805 kg Number of transport packages: 1 EQUIPMENT Work lights Heater Full cab

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511904J00086, Year of construction: 2018, operating hours: 3,705 h, load capacity: 2,000 kg, lifting height: 8,600 mm, fuel type: electric, mast type: triplex, overall weight: 4,210 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 8,600 mm Free lift: Yes Travel direction: 2 travel directions MACHINE DETAILS Mast type: Triplex Bdjdpfx Afjz D U Rgs Ajh Drive type: Electric Battery type: 5 PZS 775 Battery year of manufacture: 2019 Battery capacity: 775 Ah Battery voltage: 48 V Battery tray length: 1,220 mm Battery tray width: 425 mm Battery tray height: 785 mm Operating hours: 3,705 h Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,270 x 3,500 mm Unladen weight: 4,210 kg EQUIPMENT Side shift CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516221V00034, Year of construction: 2019, operating hours: 974 h, load capacity: 1,600 kg, lifting height: 6,820 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 6,820 mm Free lift: 2,450 mm Fork length: 1,150 mm Maximum fork width: 935 mm Minimum fork width: 200 mm Number of wheels: 3 Bjdez Eacqspfx Af Aodh MACHINE DETAILS Mast type: Triplex Drive: Electric Battery type: 5 PZS 625 Battery year of manufacture: 2018 Battery capacity: 625 Ah Battery voltage: 48 V Battery tray length: 830 mm Battery tray width: 630 mm Battery tray height: 630 mm Operating hours: 974 h Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,200 x 2,860 mm Unladen weight: 3,419 kg EQUIPMENT Side shift Non-marking tires Full cabin Heater Work lights CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30389, Year of construction: 2003, operating hours: 7,155 h, load capacity: 4,000 kg, lifting height: 3,990 mm, free lift: 1,100 mm, fuel type: gas, mast type: triplex, fork length: 1,800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 4,000 kg Lifting height: 3,990 mm Free lift: 1,100 mm Fork length: 1,800 mm Minimum fork width: 250 mm Maximum fork width: 1,160 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Fuel type: Liquefied petroleum gas (LPG) Engine manufacturer: Toyota Operating hours: 7,155 h Dimensions & Weight Dimensions (L x W x H): 3,130 x 1,420 x 2,270 mm Unladen weight: 6,720 kg Bdjdpfx Aez Eaffsf Aoh EQUIPMENT Side shift Documentation CE marking

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 212062, functionality: fully functional, cutting height (max.): 1,550 mm, cutting width (max.): 3,300 mm, saw blade diameter: 250 mm, overall weight: 1,250 kg, plate height: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 1,550 mm Maximum horizontal cutting height: 1,510 mm Bdedpfxoz Eav Re Af Ajh Maximum cutting width: 3,300 mm Maximum cutting depth: 55 mm Maximum saw blade diameter: 250 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6 A Fuse rating: 16 A Power: 2.2 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 4,510 x 1,450 x 2,300 mm Unladen weight: 1,250 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Bdedpfx Afoz Ea Rbe Aoh Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Bdodpfx Ajztzmcof Aeh Net price: 65900 PLN Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad Bodju Ndf Ispfx Af Ajdh feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *