Used Helium Leak Detector for sale (990)

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously Nodezv Salopfx Aiyeda The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Ndedpfexykm Sex Aiyja Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Nsdexykn Njpfx Aiysda Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg

Condition: refurbished (used), Tanks with a capacity of 50,000 liters, Height: 2.85 m Length: 8.5 m Perfect for a retention tank or fire protection tank. Drinking water tanks are also available. The tanks are in very good condition, leak-free, and have been sandblasted by us. Freshly painted with durable, anti-corrosive epoxy resin and polyurethane paint on the outside. They are leak-proof and prepared to meet fire department regulations. We offer tanks with and without beds. The price for a tank without steel beds is PLN 10200€, the price for a tank with beds is PLN 11200€. The raw tank (not sandblasted or painted) costs 5600€. The tanks come with a leak-tightness certificate, a declaration of compliance with fire protection standards, required for fire department inspection, and an Operation and Maintenance Manual (available upon request). The customer can decide on the nozzle arrangement. Ndjdpfx Aofngf Ioiyea An over-tank sump covering the tank outlet is available for PLN 4,000 net per unit. A float valve costs PLN 820€- 1500€ depending on the size. Installation is included in the price. The estimated time for completing a single tank is approximately 21-28 business days. Payment: 10% of the total amount as a deposit, with the balance due upon delivery, but before unloading the tank. We offer our own transport of the tank to the customer.

Condition: excellent (used), Type: ARS-1100-AE Temperature and climate testing chamber with humidity control Air-cooled Temperature and humidity chamber Temperature range: -70°C to +180°C Rate of temperature change up to 5 K/min. Humidity range: 10 to 98% RH Internal dimensions: 1100 W x 1000 H x 1000 D mm External dimensions: 1300 W x 1955 H x 2005 D mm Approx. 1100 liters AC 400 V 3-phase, 50 Hz, 29 A Weight: approx. 765 kg Refrigerant: R404A and R23 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) Nedpjzvdk Nefx Aiyoda We would be happy to answer any further questions you may have by telephone.

Condition: used, maximum load weight: 11,320 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,240 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 42 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2014, Vehicle No. G0119516_1 – Manufacturer: Krone. * Rail code * Floor: Aluminum floor * Double-deck system * Simple corner fittings * Outline marking on side/rear * Refrigeration unit * Load certificate Code-XL * Portal door with simple twist-lock fasteners (exterior) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * System for rail loading Ndjdjzu H Alspfx Aiyoa * ATP test – new * Leak test – new * Double-deck equipment without double-deck load beams (available at extra cost!). Financing upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Krone Telematics Cool W: Location monitoring, door monitoring, refrigeration temperature monitoring, and refrigeration unit monitoring can be activated at Krone for an extra charge. Delivery time: IMMEDIATELY AVAILABLE. Newly painted. Oil service – new. Solar panel for monitoring start-up voltage – new. Technically ready for use; body and support legs newly painted. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run to -18° C – OK!. Undercarriage (KTL) cleaned and treated with underbody protection. Valid safety inspection (UVV). UVV documentation available. PAINT – NEW!!!. LASI CODE XL!!!. Mobile refrigeration storage. Dimensions are approximate. Offer subject to change; sale is reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, Year of construction: 2002, operating hours: 1,628 h, 2002 | Case 1825B | Used Wheeled Skid Steer | 1628 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Njdpfx Aiozv Emxoyjda 35 inspection points 21 approved ✅ 7 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Poor general condition of the telescopic. The left lifting cylinder does not hold the load and is leaking. The seat is damaged. The right drive control is difficult to operate. The rigid piping is damaged. The right rear tire needs to be replaced. Impact on radiator and engine hood. Unable to start and keep running without booster. Missing a nut on the right rear rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41114 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die Nodsy Samuspfx Aiyeda - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, oil tank capacity: 1,200 l, total length: 3,500 mm, total width: 2,400 mm, total height: 6,000 mm, overall weight: 45,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking. It is fully functional, ready for operation and can be inspected and tested while powered on. The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology. The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options. Scope of delivery & Accessories Tool sliding and lifting ball system GÜTHLE Hydraulic foot pedal (GÜTHLE) Roller bolster/carrier console 10 t (GÜTHLE) 4-channel tool clamping system (length 1500 mm, 2 t per channel) Complete REXROTH hydraulic unit Air cooler Condition of the machine Fully functional Hydraulic system is leak-free and runs smoothly Control system & electrical components in good condition Mechanically sound, no visible damage The machine is in assembled condition and can be demonstrated while powered on. Press force: Nominal force: 500 t Max. press force at 250 bar: approx. 510 t Dimensions & Weight: Overall dimensions approx.: 3500 × 2400 × 6000 mm Total weight: approx. 45,000 kg Working area: Table area: 2000 × 1500 mm Column spacing (internal): 2000 × 900 mm Installation height: 1000 mm Stroke: 800 mm (linearly adjustable via linear measuring system) T-slots available (mounting positions to be defined by customer) Hydraulic system: Main cylinder Number: 2 Piston Ø: 340 mm Rod Ø: 280 mm Auxiliary/planing cylinder Number: 2 Piston Ø: 120 mm Rod Ø: 70 mm Draw cushion Force: 150 t Cylinder: 2 × Ø 310 × 210 mm Stroke: 400 mm Pumps and tank Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min Hydraulic tank: 1200 L Oil system: 1000 L filling capacity Speeds Forward stroke: 120 mm/s Return stroke: 150 mm/s Working/pressure stroke: 12 mm/s Control & Safety: Control system SIEMENS S7-1200 + ET200S 12" Touch Panel Schneider Electric Operating modes: Two-hand automatic mode Setup mode Single stroke Stroke without draw cushion Deep drawing mode with draw cushion Measuring & safety components Linear measuring system Novatechnik (63 Bit) for ram and draw cushion Light barriers SICK at the front and rear (height: 1050 mm) Side protective grilles with limit switches Remote maintenance via Ethernet possible Mobile control panel International Note Block (DE/EN) German Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel or loading assistance. Collection only by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Nsdpfx Ajx D Tv Deiyeda Location: Saxony/ Germany

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm Ndedpfx Aoymf Sdoiyoa capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, USON Qualitek 620 Leak Tester Leak Tester Condition: Used functional Njdpfxjy Sum Nj Aiyoda

Condition: used, Year of construction: 2008, JW FROEHLICH MPS 200 - Leak tester LEAK TESTER Njdjypwgrspfx Aiyjda Condition: Used functional

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8200 x 54 mm cutting width 1,6 mm Capacity 90° - rectangle 650 x 850 mm Capacity 90° - square 650 x 650 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 6400 kg dimensions of the machine ca. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine. Ndjdpfxeyk Ikqo Aiyja

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining Ndsdpfezucbqox Aiyja • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: Ndsdpfxozqbmde Aiyea 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 31230 12050, functionality: fully functional, pressing force: 120 t, table length: 3,100 mm, oil tank capacity: 190 l, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, We offer this used Dener DMP-CNC/120-3020 press brake, manufactured in 2012. Type: DMP-CNC/120-3020 Bending force: 120 t Bending length: 3020 mm Weight: 8000 kg Year of manufacture: 2012 The machine was manufactured in 2012 and purchased by us as a brand-new unit. Since its purchase, it has been operating in a single company under the supervision of permanent operators. I assess its technical and visual condition as very good – the machine is in continuous operation, well-maintained, clean, and fully functional. Key parameters and equipment: • Model: Dener Puma 3100 x 120 CNC • Pressing force: 120 tons • Bending length: 3100 mm • Control: Intuitive ESA S 500 CNC controller with 2D graphics (easy to program, menu in Polish). • Number of axes controlled by CNC: 4 axes (Y1, Y2, X, R). • Back gauge: Automatic, moving forward-backward (X axis) and up-down (R axis), controlled directly from the CNC panel. • Table deflection compensation: Manual. • Tooling clamping: Quick-clamping system, Amada/Promecam (Euro) type, with levers – significantly reduces setup time. Ndsdpfszuxpdjx Aiysa • Safety: Full side protection and optical curtains (safety barriers) with CE certification. Technical condition: • Electrical cabinet and hydraulics are in their original condition, with no non-factory modifications or leaks. • The machine has been regularly serviced and has been used for light and medium-sized parts.

Condition: used, mileage: 2,89,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle in offset design, A2E rear axle with 440 crown wheel, hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low, C0G rear frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D access behind cab, left, C5P frame bolted, C6G steering Servotwin, C6I servo pump, regulated, C6Q stabilizer front axle, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle fenders, 2500 mm vehicle width, C8H 3-piece fenders with EG splash guard, C8I splash guard (EG) front, C8Y underbody cladding, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat, comfort, D1N co-driver functional seat, D2N seatback release, driver's seat, D3A comfort bed, upper, wide, adjustable, D3B comfort bed, lower, D3M PremiumComfort mattress, lower, D3N PremiumComfort mattress, upper, D3Q seat cover, velour, driver's seat, D3T seat cover, velour, co-driver and middle seat, D4S sun blind, one-piece, electric, windscreen, D4T curtain, across bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater. You can reach us by phone Monday to Friday until 20:00 and Saturday until 16:00! More details: Leasing/financing and trade-in possible! Errors and prior sale excepted! All details without guarantee ... more on our homepage Ndjdpfeu Nnf Ssx Aiyea

Condition: used, Year of construction: 2012, operating hours: 6,800 h, functionality: fully functional, SBM Crushing Plant Type: Impact crusher, type RHSM-3 Crusher with transfer conveyor Single-deck screening machine 4 x conveyor belts with oversized material return to the crusher Metal detector Performance parameters -Feed size: 0-800 mm -Feed rate: up to max. 130 t/h -Inlet opening: 725 x 1260 mm Nedpfszv Edwjx Aiyeda -Rotor diameter: 1160 mm -Electric motor: 132 kW -Hydraulic unit: 3.0 kW Current application: Asphalt recycling

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Ndedpfsx Ari Hsx Aiyja Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: used, functionality: limited functionality, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 16,000 kg, Year of construction: 2007, operating hours: 11,500 h, Equipment: cabin, We are offering a New Holland MH CITY mobile excavator/loader with a split boom for sale. Ndjdpfxjztvgde Aiyea Registration number: 300/25. Defects: Oil leakage on the driveshaft, leaking swivel bearing, the electrical system is not fully functional, and the hydraulic quick coupler cannot be opened. Otherwise, the machine is roadworthy, and the engine and hydraulics are in good working order. Technical data: Engine: CNH 87 kW Operating hours: 11,xxx Year of manufacture: 2007 Weight: 16 t Equipment: Suspended seat, crane hook, hydraulic connections on the boom, manual engine speed control, radio, lighting, dozer blade. Accessories: Hydraulic quick coupler Digging bucket, 97 cm wide, 0.8 m³ volume Transport dimensions: Length: 7.6 m Width: 2 m Height: 3 m Weight: 16 t Loading and transport to the destination are possible by arrangement. The stated price is exclusive of VAT.

Condition: used, functionality: fully functional, empty load weight: 1,780 kg, Year of construction: 1996, operating hours: 2,168 h, We are offering a Gehl wheel loader, model SL3825sx, for sale. Condition: Fluid leak Registration number: 320/26 Technical specifications: Engine: Kubota diesel, 21 kW Ndjdpjzvahdsfx Aiyoa Year of manufacture: 1996 Operating hours: 2168 Weight: 1.738 t Load capacity: 0.45 t Accessories: 1x front bucket 1x pallet fork Transport dimensions: Length without bucket: 2.7 m Width: 1.45 m Height: 1.7 m Weight: 1.739 t The price does not include VAT. Loading and cost-effective transport to the destination can be arranged.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Ndsdpfx Aszwgiqsiysa

Year of construction: 2003, condition: used, A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible. Nsdpfx Aezwfq Heiyeda

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit Nsdpfx Aioztm Hboyoda • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Ndodsztm Dmopfx Aiyja The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.