Used Hurco Hurco Vmx 50I for sale (266)

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Njdpfx Abezu Nz Dj Uslg Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz Nedpfx Aew Nklhsb Uolg - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting Nodpex H A I Rofx Ab Uelg • ISNC extended NC mode

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Nlsdpoztrklsfx Ab Ueg Foot mat with Milltronics logo

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm Nlsdpevh Nbujfx Ab Uog weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Nledpfjp I Hanjx Ab Usg

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified. Nljdpfx Aszw Ex Djb Usg

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Njdezgt U Sspfx Ab Uslg Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Nsdpfx Aotrhq Hjb Uelg - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), functionality: fully functional, Vertical milling machine Nljdpjumluwjfx Ab Ueg

Year of construction: 2002, condition: ready for operation (used), Hurco VM 1 machining center Spindle speed max. 8000 RPM Njdpfx Abei E Iaco Uelg Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle: 2000 hours Complete software options, DXF, thread cutting without collet Various tools included, Hilma vise, drawer cabinet with tools.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nljdpfx Abjzikb Us Uog Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Nodpfx Aboxur E Ss Ujlg Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: good (used), Year of construction: 1997, Type / Model: BMC30 Nedpfsv I Dn Nsx Ab Uolg Control: Ultimax SSM Operating hours: 5,744 h Travel x-y-z: 760 - 460 - 610 mm Table: 1,130 x 500 mm Table clamping area: 1,000 x 400 mm Speed range: 80 to 8,000 rpm Spindle mount: SK40 Feed rates: 3 to 7,600 mm/min Rapid traverse: 7,600 mm/min Tool changer: 24 stations Power supply: 11 kW Accessories/equipment: Coolant system, external interface Condition: Good Weight: Approx. 4.0 t Dimensions: 2,200 x 2,300 x 2,800 mm (without display)

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Nljdpfxezikcfj Ab Ueg Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min Nsdpfjwla Hnsx Ab Uelg TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: good (used), Storage location: 3131 Manufacturer: AMADA Type: HFA 250II Machine number: 25250103 Year of manufacture: 2001 Cutting range, round: 30 to 250 mm Cutting range, rectangular: 270 x 250 mm Bundle cutting min/max: 100 x 50 mm / 200 x 150 mm Fixed jaws, rear: 300 x 150 mm Fixed jaws, front: 130 x 150 mm Nljdpfx Abezl N Tho Ueg Movable jaws, rear: 300 x 150 mm Movable jaws, front: 85 x 150 mm Opening: 300 mm Saw blade: 3,505 x 34 x 1.1 mm Cutting speeds: 24 to 90 m/min, continuously variable Single material feed: up to 400 mm Total material length: 10 to 10,000 mm Equipment: Coolant system Condition: good Connection: 7.9 kW Weight: 1.5 t Dimensions: 2,000 x 2,400 x 1,300 mm

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Nlsdpjyw Sv Sjfx Ab Usg

Condition: used, mileage: 7,54,100 km, power: 260 kW (353.50 HP), first registration: 05/2012, fuel type: diesel, number of seats: 40, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * our internal number: 1160 * PICK UP PRICE * MB O 530 G C 2 * powerful engine, 260 kW / EEV * COC certificate available * ZF automatic transmission * Vmx: 95 km/h * AIR CONDITIONING * Auxiliary heater * various folding windows * Lifting/Lowering/Kneeling function * electric sunroofs * Matrix display / Front / Side / Side / Rear * LAWO control unit installed * mechanical folding ramp * 2 x interior monitors installed Nlsdpfx Abexv N Efj Ujg * 38 seats and 4 x folding seats installed * 118 standing spaces * 4 x double-width inward-swinging doors * Paint: clean * Interior: Seats - clean * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information is without guarantee * We reserve the right of interim sale * We refer to our general terms and conditions

Condition: used, Year of construction: 2016, The 2015 FANUC P-250iB/15 is a large-format, 6-axis articulated industrial robot engineered specifically for automated painting, coating, and dispensing applications in hazardous environments. ### Key Technical Specifications * Payload Capacity: $15\text{ kg}$ (Wrist load) * Horizontal Reach: $2,800\text{ mm}$ * Repeatability: $\pm 0.2\text{ mm}$ * Robot Weight: $\approx 530\text{ kg}$ * Axes: 6 controlled axes * Controller Compatibility: FANUC R-30iA / R-30iB series (equipped with an integrated purge unit) --- ### Core Features & Design Highlights * Explosion-Proof & ATEX Certified: Built with a fully sealed, pressurized air enclosure designed for safe operation in flammable solvent environments (ATEX Category 2, Group 2G/2D, Class I/II/III Div 1 standards). * Offset Hollow Wrist & Arm: The internal routing design allows paint hoses and air lines to feed through the center of the wrist and outer arm. This reduces hose whip, avoids interference in tight booth spaces, and prevents debris from contaminating painted surfaces. * Integrated Process Equipment: Designed to mount color valves, pumps, and regulators directly inside or close to the arm. Minimizing the distance between process valves and the spray applicator drastically reduces paint waste and flush cycle times during color changes. * Versatile Mounting Configurations: Supports floor, inverted (ceiling), wall, shelf, and angle mounting to fit compact spray booths. It is also available in left-arm and right-arm offset configurations for symmetrical booth layouts. --- ### Typical Applications * Automotive body and bumper coating * Large industrial component spraying (aerospace, heavy machinery) Nljdsz Drxnopfx Ab Usg * Liquid paint dispensing, sealing, and primer application

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco AS260S50Y/FS 6x2-4 Beverage Box Body with Tail Lift Böse swing wall body, tail lift: BÄR BC 2500 S4U-W4 (2,500 kg), fold-up underride guard, 2x trailer couplings (standard and low-mounted), CA axle configuration 6x2P with 3 axles, trailing axle, CT cab, AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP, Euro VI, GT transmission TX-12M 12-speed HiTroniX automated, MT permissible gross weight 26 t, RT drive axle variant, SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, WB wheelbase 4,800 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE T. 315/70R22.5, 04047 luggage compartment left and right, 02714 electrically adjustable and heated exterior mirrors, 00632 transparent sun visor, mounted externally on cab roof, 00873 AS cab with standard roof (MY24), 72536 auxiliary diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at the bed, 72270 one-piece lower bed, degree of firmness – soft, incl. adjustable head section, 78563 horn behind bumper (compressed air), 07599 weight configuration front axle 8,000 kg/rear axle 11,500 kg (technically possible 12,000 kg)/trailing axle 7,500 kg, 75182 electrical preparation for tail lift operation according to VEHH standard, 02532 battery master switch in cab, electrically operated, 08299 air compressor 2-cyl. 630 ccm, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, Ringfeder make, 07228 fuel tank 390 liters, aluminum, 00730 rear axle ratio: i 2.64, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protector at frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left frame, 02548 side marker lights, 75181 reverse warning buzzer, switchable, 01076 high-performance engine brake, 05108 warning beacon, 50105 white IC 194, 30804 operating manuals, 30184 tire manufacturer GOODYEAR, 20294 tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 00875 infotainment 10" TFT display, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side windows on driver and passenger side, 02916 driver’s seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable seatbelt, lumbar support, with 3-stage cooling or heating function, 72543 LED headlamps, 78714 standard rear lights, 72629 fog lamps including cornering/turning light, 00915 electric parking brake, 07306 axle load display in cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with stop & go, 73240 electrohydraulic power steering. On request, we can provide you with a leasing or financing offer. Nljdpfx Absy Hn U No Ujg Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. ... Subject to errors, alterations, and prior sale!!! ... ESP, navigation system, stationary heater Cab: Long-distance transport

Condition: used, mileage: 1,250 km, power: 368 kW (500.34 HP), axle configuration: 6x2, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Braking system For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Iveco S-Way AS260S50Y/FS 6x2-4 Swing-wall box body + tail lift Nodpfx Abeyfpt As Ujlg Body: Böse swing-wall box body, BODY DIMENSIONS: Length x internal width approx. 8,100 x 2,470 mm (designed for 20 Euro pallets), side clearance height approx. 2,200 mm, continuous side drop sides. Full roof retraction in open position. Loading platform height approx. 1,300 mm unladen. 2x trailer couplings (1x 40mm high, 1x 50mm dropped). CA Axle configuration: 6x2P, 3 axles, trailing axle, CT cab type. AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP Euro VI, GT gearbox TX-12M 12-speed HiTroniX, automated, MT gross vehicle weight 26 t, RT drive axle variant SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, US usage STD standard, VE vehicle variant CABINAT standard chassis with cab, WB wheelbase 5,100 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE tires 315/70R22.5, 01539 front grille design gun metal, 02326 cab plastic parts painted in cab color, 04047 left and right luggage compartments, 01627 IVECO logo gunmetal grey, 79240 black decorative film on doors, 00632 transparent sunvisor, mounted externally above cab roof, 72270 lower bed one-piece, firmness/feel - soft, incl. adjustable head section, 78563 air horn behind bumper (compressed air), 01743 upper bed with single mattress, 07599 axle load variant: front axle 8,000 kg/rear axle 11,500 kg (technically possible: 12,000 kg)/trailing axle 7,500 kg, 02532 battery isolator switch in cab, electrically operated, 02270 battery 210 Ah high performance AGM, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, make Ringfeder, 05688 fuel tank 480 liters, left, aluminum, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protection for frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left side of frame, 02548 side marker lights, 79454 preparation for additional headlights on cab roof, 75181 reverse warning beeper, deactivatable, 05108 warning beacon, 00237 retarder/intarder for ZF or Allison automatic transmission, 52081 traffic red RAL 3020, 30804 printed documentation (operating manuals), 30184 tire make: GOODYEAR, 20294 Tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 72525 foldable table in passenger area, 01743 upper bed with continuous mattress, 04047 left and right luggage compartments, 72536 additional diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at bed, 00876 Infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sun roller blind for side windows, driver's and passenger's side, 02916 driver seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable integrated seat belt, lumbar support, with 3-level cooling or heating function, 72543 front LED headlights, 78715 LED rear lights, 72629 fog lights incl....

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Nledpozhvwlofx Ab Usg Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: new, functionality: fully functional, New joystick as a replacement for Hurco Ultimax 4 trackball. For sale is a new joystick suitable for Hurco CNC controls with Ultimax 4. The joystick replaces the original Hurco trackball and is an ideal modern, robust alternative if the trackball is defective or inaccurate. Installation is easy and can be completed within a few minutes. No special technical skills are required. An installation video guide is available online (search on YouTube: "HuStick4 - Joystick passend zu Hurco Ultimax 4"). Njdpfx Aboy N Eppe Uslg

Condition: new, Year of construction: 2025, functionality: fully functional, RISO SF9350II A3 ONLY 20 PRINTS AND 10 MASTERS Njdsxwc Dwopfx Ab Uslg USB + NETWORK CONNECTION NEW IN ITS BOX BLACK DRUM INSIDE COMES WITH A CABINET+ 1 ROLL EXTRA MASTER +1 EXTRA INK CARTRIGE. THE EXTRA NEW DRUMS ALSO AVAILABLE AT THE PRICE OF 760€ EATCH, WITHOUT THE INK.