Used Hurco Process Board 415-0194-001A Mit Dual Rs232 Board for sale (32,451)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Hjdpfx Aeyxr T Tsfhjr Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Hjdpfx Asxg D A Hsfhjr

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. Hodpfxsh R Taqo Afher The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Hodpfxsmhhy Ns Afhor - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Additional equipment • 24-fold changer • Chipping screw • Electrical handwheel • Incl. KITAGAWA round table • IHK 30 bar Machine Benefits Technical Machine Benefits • Table size: 760 x 510 mm • Spindle cooling: yes Hodpfxsx Enl Ee Afher • Number of tool positions in atc: 24 Extra Information Machine still under power

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Hedjy Tx Nqjpfx Afhor

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Probe: Renishaw Hedpfx Afeyx E Nnjhjr Tool measurement: Renishaw Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Transport weight: 8,900 kg

Condition: excellent (used), Year of construction: 2007, Hurco machining center VMX 24 condition see pictures Hjdpjv Nzuisfx Afhsr

Year of construction: 2002, condition: ready for operation (used), Hurco VM 1 machining center Hjdpsi E Iacefx Afhjr Spindle speed max. 8000 RPM Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle: 2000 hours Complete software options, DXF, thread cutting without collet Various tools included, Hilma vise, drawer cabinet with tools.

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Hjdjwud Afopfx Afher Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Hsdpori N A Hofx Afhsr Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter

Condition: ready for operation (used), Year of construction: 2006, TECHNICAL DATA Travel X 610 mm Travel Y 510 mm Travel Z 610 mm Table dimensions 760 x 510 mm Table clamping surface 760 x 510 mm T-slots 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/760 mm Spindle holder steep taper DIN 69871 ISO 40 Spindle speeds 10 - 10,000 rpm Torque (at 500 rpm) 142 Nm Hodpfx Ajr Ar N Usfher Drive power (30 min/const. ED) 7.5 kW Ball bearing mounted linear guides in X,Y,Z axes Coolant tank 150 l Rapid traverse for X/Y/Z axis 30/30/20 m/min Feed rates programmable 3.0 - 7600 mm/min Positioning accuracy +/- 0.010 mm Repeat accuracy +/- 0.005 mm Milling feed in mm/min 3.0 - 11'400 Table load 700 kg Automatic tool changer with double arm 24 stations Max. tool diameter Tool diameter 80 mm Max. Tool length 300 mm Max. Tool weight 6.8 kg Machine weight 4100 kg Space requirement L x W x H (footprint) 3470 x 1980 x 2730 mm Power fuse 24 A Renishaw NC4 Laser

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Hedjp I Hanjpfx Afhsr

Condition: used, Year of construction: 2000, functionality: not functional, Hurco VMX 50 machining center with Ultimax control IKZ chip conveyor Hodpfx Ast H I Ugofher

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: Hodporxfxhjfx Afhor 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 Hjdpel Tpmdofx Afhjr feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Condition: good (used), Year of construction: 2016, HURCO CNC Machining Centre VMX 24 i Travels X-axis (mm): 610 Y-axis (mm): 508 Z-axis (mm): 610 Main Spindle Spindle taper (DIN 69871): SK 40 Max. spindle speed (rpm): 12,000 Max. spindle power (kW): 9 Max. spindle torque (Nm): 95 Feed Rapid traverse X/Y/Z-axis (m/min): 38 / 38 / 32 Tool Changer Magazine positions / optional: 30 Max. tool diameter (mm): 80 Max. tool length (mm): 300 Hsdpfxsxvtihe Afher Max. tool weight (kg): 7 Additional Data Required installation space (mm) (doors open, incl. control unit and chip conveyor): 3,930 x 4,041 x 2,725 Machine weight (kg): 4,750 Coolant tank capacity (l): 367 Scraper belt conveyor: Standard Technical specifications subject to change without prior notice.

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Hedpfx Asv Nzucefhjr

Condition: good (used), Year of construction: 2011, HURCO CNC machining center VMX 60 t X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer, 24 positions Equipped with WinMax control Includes: Internal coolant system (IKZ) Spindle cooler Coolant spray gun Chip splash guard cabin Signal light for machine operating status Flushing system to assist with chip removal Machine lamp Set of machine leveling pads Machine manual on CD Hedpfoxvtfpsx Afhjr 2 color screens (text + graphics) Simulation graphics Tool and material library Detachable electronic handwheel Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck)

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming Hsdjxvtf Aspfx Afhsr via external programming device or CAD/CAM system through RS-232 C or V 24 interface)

Condition: good (used), Year of construction: 2012, power: 0.018 kW (0.02 HP), travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (min.): 12,000 rpm, Hurco machining center V 42 T 3-axis technology Travel in x 1067 mm Travel in y 610 mm Travel in Z 610 mm Hjdpfxetxrbie Afhor Table dimensions 1270 x 610 mm Spindle speed 12000 rpm 40-fold tool changer Chip conveyor Simulation graphics Tool and material library Pocket milling with island Synchronous thread cutting without compensating chuck Win Max control IKZ high pressure through the spindle

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Hodpoudb I Tsfx Afhsr

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Hjdpfx Afjxrcnlshjr

Condition: excellent (used), Year of construction: 2014, Controller WIMNAX V09 (DSM) Table size 2184 x 865 mm T-slots in table 7 x 18 x 125 mm Table load max. 2268 kgs X travel 2134 mm Y travel 864 mm Z travel 762 mm Spindle speed 12000 rpm Spindle power 18 kW Tool holder type SK40 ATC magazin 40-fold Max tool dia. 74.9 mm Max tool length 300 mm Max tool weight 7 kgs Rapid speeds X/Y/Z = 18, 18, 13.5 m/min Weight 17000 kgs Dimensions LxWxH = 7570 x 4450 x 3260 mm Accessories, features - Coolant device - DXF, NCPP, ISNC, Herical, rigid tapping, pocket/islands options - CTS 20 bar - Spindle cooler - Chip conveyors - Manuals Very good condition. Ready to sale immediately. The tools are not in with the machine. Hedpfxspiaqxe Afhor

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Hsdpfxsy T Iwqs Afher Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Tool and material database, X-axis bearing likely defective.