Used Indexable Inserts / Replacement Blades for sale (9,843)

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Ncsdoc Icm Repfx Akfjr Mechanical speed: 25,000 Ex./h Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS • 4 MTD-AWS-OWK • built in 2005 JET Feeder • 8 JEF-450-FVM-SA190 • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC

Year of construction: 1997, condition: used, Built in 1997 Mechanical speed 24.000 c/h Sizes main product pages 96-120 pages 4-8 Nodpfedngghsx Akfocr Size supplement pages 96-120 Equipment • opening station with sucker and sword • 2 main product feeders • 8 insert feeder • 7 stream feeder AF-200 • delivery • connected with • compensating stacker CN-25

Condition: ready for operation (used), Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 14.000 c/h Working height feeder 1.100 mm Equipment Njdsd Ezt Nspfx Akfscr • main product feeder • opening station with sucker and sword • 5 insert feeders • 1 Tandem supplement stations • 1 empty station • 1 Tandem supplement stations • 1 insert feeders • 308 turn compensating stacker • compensating stacker CS 20 • infeed at the top

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Size main product max 420x310x70 mm Size main product min 200x120x1 mm Size supplement max 420x310x8 mm Size supplement 90x75x1 mm Mechanical speed 18.000 c/h Equipment • book block feeder • main product feeder • opening station with sucker and sword • 2 insert feeders • 2nd suction opening unit Ncjdpfx Ajd Hguiekfer • 2 insert feeders • bump turn with vacuum belt • connected with compensating stacker • compensating stacker Rapido

Year of construction: 2006, condition: good (used), Built in/YOC: 2006 Technical Data: Size: min 114 x 162 mm, max 250 x 353 mm Size product: min 105 x 148 mm, max 229 x 324 mm Product thickness rotary feeder: max 3 mm Product thickness shuttle feeder: max 10 mm Ncsdpfomn Rbzex Akfjr Product thickness Vacuum/Friction feeder: max 13 mm Paper weight: min 80 g/m2, max 180 g/m2 Speed: max 10.000 c/h Equipment: · 8 Base stations · 6 Rotary feeder · 1 Shuttle feeder · 1 Inserting station · 1 Envelope feeder · 1 Outfeed left · 1 Reject device · 1 Turning belt · 1 Stream delivery · 1 Simatic touch panel Optional equipment (not included!): · 1 Balsfulland Base controller · 2 Balsfulland BVS 8000 · 1 Balsfulland BVS 8000 Product Shift Box All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Year of construction: 2007, Main sheet format: max 334 x 272 mm; min 194 x 145 mm Single feeder format: max 334 x 272 mm; min 148 x 105 mm Double feeder format: max 320 x 272 mm; min 148 x 105 mm Product thickness: max 13 mm Blowing air: 1.5 bar Compressed air: 6 bar Speed: max 30,000 c/h Equipment - Main product feeder - Opening station - 6 insert stations - Display Optional accessories: --- not included in scope of delivery --- Ncsdpfxsqrqx Do Akfer - additional feeder - compensating stacker - Automatic tying machines - Wrapping machines - palletizer

Year of construction: 2000, condition: ready for operation (used), Build in 2000 - main productfeeder with attachment strap - opening station - 6 Inserting stations Nsdpog Dculefx Akfscr - rubin filmwrapping station - reject unit - shrink tunnel

Condition: ready for operation (used), Year of construction: 2008, Technical informations Format Range Maximum Format: 320 x 250 mm (12.6 x 9.8 inches) Minimum Format: 130 x 90 mm (5.1 x 3.5 inches) Optional: Can be configured for formats down to approximately 100 x 75 mm (3.9 x 3 inches). Book Thickness: Maximum 25 mm (0.98 inches) (depending on product specifications). Cut Forms: Angular Cut (straight index tabs) Form Cut (various shapes) Njdpfjx Rw Imjx Akfecr Corner Rounding (optional) Corner Perforation (optional) Index Types: European/Arabic index Combined indexes Double and multiple indexes Register Cutting Depth: 25 mm (0.98 inches) Punching Axes: 1 axis (fully automatic process) Printing Capabilities: Index printing with 1 or 2 colors. Print Content: Letters and words on both printed and non-printed indexes. Performance Output: Maximum 1,500 pieces per hour (output can vary from 100 to 1,500 pcs/hour depending on product complexity and setup). Physical Specifications Dimensions (L x W x H): Approximately 3,900 x 2,700 x 2,000 mm (153.5 x 106.3 x 78.7 inches) Weight: Approximately 2,300 kg (5,070 lbs)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Machine number: Y201095 Built in: 2017 Size: DL-C4 mm Njdpfxjl Dxq Uo Akfocr Speed: 10.000 c/h Equipment • 6 station base • 5 rotary feeder • 1 inserting station • 1 reject gate • 1 envelope feeder • 1 belt delivery optional equipment: -- not included -- • extra rotary feeders • shuttle feeders • delivery system Condition: good working, machine can be inspected in production

Condition: used, Year of construction: 1990, functionality: fully functional, The machine is in excellent condition and fully functional. Njdpfx Aev Dr D Rjkfjcr

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Nedpjh Anyfjfx Akfscr

Condition: used, Year of construction: 2002, Kern 3000 envelope inserting machine. The device is in working condition, used only occasionally at a backup facility, so it requires cleaning and maintenance. Nodpfx Akev D Eg Sjfocr

Condition: excellent (used), Index cutting machine Working size: 440 x 100 Nsdjhbwbpjpfx Akfecr

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: 1 pc 0.651.406-19.3 UNI Universal Interface 1 pc 0.650.847-56.1 O32 Output Card 2 pcs 0.651.708-57.3 I32 Input Card 1 pc 0.652.138-36.1 APC 1 pc 0.651.928-25.3 LAB Axis Controller 1 pc 0.651.400-22.3 1 pc 0.860.204-59.1 B32 1 pc 0.652.128-35.0 RE4 1 pc 0.651.269-26.0 ITY Serial Interface 1 pc 0.651.974-23.2 ABS Termination Board 1 pc 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Ncodpeflrtxofx Akfer Weight: 7 kg Individual cards available on request.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Ncodpfxjgd D U Eo Akfer Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Njdpfou Rwa Iox Akfjcr Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing Ncsdpfx Aetx E Rqekfer - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic Ncedpfoharwyox Akfor - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg Ncedsuch N Ijpfx Akfsr good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Ncsdsr I E Itspfx Akfor Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Nsdpfxjquzd Rs Akfjcr Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Njdjymd Udepfx Akfjcr

Condition: excellent (used), functionality: fully functional, Multirip saw CML SCA320 + material outfeed Track width: 350 mm Maximum saw blade spacing: 320 mm Cutting height: 120 mm Ncjdpfx Akeyf Ah Hofjr Bushing diameter: 70 mm Feed speed up to 36 m/min Electric lifting of pressure rollers Motor power: 30 kW CE certificate Year of manufacture: 2001

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Nsdpfeymga Nsx Akfocr Total weight: 160 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz Ncedpfxju Tln No Akfor - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition