Used Jet Ehvs-80 Cs for sale (20,795)

Condition: ready for operation (used), Heldt & Rossi Series 806 (807/2) DC servo amplifier, Type 500-75, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodei Ea D Espfx Apdog

Condition: ready for operation (used), Mitsubishi HD80-11SP DC servo motor SN: N77805021 with Sanyo Denki RST-5XC-11P mounting SN: 021122010D, used, in good condition, 100% functional, scope of delivery as per photos Laodpfx Aew E Uxrspdsg

Condition: ready for operation (used), Bosch SM 20/30 GTC - SM 20 / 30 GTC pulse inverter 1070068043-207, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Lsdpfx Apjtqi Dpedsag

Condition: ready for operation (used), Fanuc A06B-0247-B805 AC servo motor SN: C02ZB1002 + Pulscoder A860-2010-T341, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Lasdpfxex Dt Hio Apdeg

Condition: ready for operation (used), Fanuc A06B-0315-B033 AC Servo Motor SN: C907A6680, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Lajdsx Dt Iajpfx Apdeg

Condition: ready for operation (used), FTS ACG4-X105-LJSA1 AC - servomotor SN: 1005VS480475, used, in good condition, 100% functional, scope of delivery as per photos. Laodpfx Apjx Dt Umjdeg

Condition: excellent (used), Year of construction: 2023, roll diameter: 85 mm, total width: 800 mm, total height: 650 mm, total length: 1,200 mm, empty load weight: 150 kg, Load moving system CS Skates - ET6 Lasdszcvbzopfx Apdog MACH-ID 7822 Make: CS Skates Type: ET6 Year: 2023 Steering skate length:600mm Steering skate width:530mm Steering skate hight:110mm Skate length: 270mm Skate width: 220mm Skate hight: 110mm Max. loading capacity:3 + 6T Number of wheels: 16 Wheel Ø: 85mm Wheel material: Hard Nylon Hydraulic jacks: 2 Lifting capacity: 10T Lifting range of foot:30-260mm Lifting range of head:420-650mm Length: 1200mm Width: 800mm Height: 650mm Weight: 150kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 46 l/min. The machine features pneumatic tires with a parking brake on the rear axle and steering rollers on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with continuous side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate Ledpfx Apehga U Asdsag CP22-170 170 bar 46 lpm CP22-220 220 bar 36 lpm CP22-280 280 bar 27 lpm CP22-350 350 bar 23 lpm CP22-500 500 bar 16 lpm General specifications: ----- Drive motor: 2-cylinder, 4-stroke gasoline engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with manual throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 45 l/min. The standard version has solid rubber tires with a parking brake at the rear and swivel casters at the front. The “Slim version” has a narrower design and also narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal components with all-round side frames made of stainless steel. The standard model has dimensions of 1060 x 760 mm. The "Slim" version has a very compact size of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others, see datasheet and available upon request. General specifications: Lasdpfxjhf Nbdo Apdjg ----- Power of the drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Including standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Lsdpfx Ajhf Na Iopdsag Weight: 70 kg Includes standard accessories.

Condition: used, Year of construction: 2011, turning diameter over bed 350 mm turning diameter over slide rest 216 mm turning length 1000 mm Laedpfjzlkvqsx Apdog turning diameter in the gap 550 mm turning speeds 40 - 1800 U/min centre height 170 mm spindle bore 40 mm total power requirement 4,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard

Condition: like new (used), For sale is a like-new JET cylindrical grinding machine, model JWDS 1632, with a maximum grinding width of 406 mm / 812 mm in 2 passes. Lsdpozgrz Rjfx Apdoag The machine is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: - Power: 230 V / 1.1 kW / 1.5 HP - Drum speed: 1,450 rpm - Grinding speed: 9.5 m/s - Feed rate: 0 - 3 m/min - Maximum grinding width: 406 mm / 812 mm in 2 passes - Minimum grinding length: 60 mm - Grinding thickness: max / min 75 / 0.8 mm - Dust extraction connection: 100 mm - Dimensions (L x W x H): 1,010 x 510 x 1,270 mm - Weight: 71 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: grinder, grinding machine, grinding Reference: R-R05Y9

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Lasdpjqwgzqjfx Apdog Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 64000 € 1209.6 € 80 to 900 mm 540 mm 180 mm 4 - 102 mm 54 1/min 490x325 mm 280 mm 380 mm 7.5 kW 2010 mm 1390 mm 2750 mm 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke Lsdpfsynnbdox Apdeag foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: used, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, placer STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Serial no. F11/5JN5A1/A Year 2011 Number of axes 4 Handling weight (rated load) 2 kg Lajdpfx Aovmhphopdsg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeat accuracy (X+Y) 0.01 mm Repeat accuracy (Z) 0.004 mm Repeat accuracy (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Stroke axis 3 (Z-axis) 200 mm Rotation axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot configuration floor mounting Controller STÄUBLI CS8C bmn Serial no. F11/5JN5A1/C Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Dimensions of controller (W x H x D) 450 x 310 x 450 mm - Controller adjacent with removable "Teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport footprint L x W x H 900 x 700 x 1500 mm Very good condition

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure range from 230 to 2000 bar with a flow rate of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. To ensure durability and corrosion resistance, the frame inside the trailer is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very appealing appearance. The frame can be easily pulled out for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, an electrically powered hose reel, a remote control, etc. However, it is similar to but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. Water-cooled Drive engine power: 37.3 kW Drive engine speed: 1900 rpm Tank: 90 L Max. fuel consumption: 11.0 L/h Lsdpfohgbkfex Apdoag Noise level (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 is part of our series of high-pressure machines with an electric drive, designed for pressures ranging from 100 to 2000 bar and a flow rate of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal components and all-around side frames made of stainless steel. The front wheel and two large rear wheels, including a parking brake, ensure easy maneuverability and stable positioning. A lifting eye facilitates transportation. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Lsdpfx Ajhga Irjpdjag 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and other models, see data sheet and available upon request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. General specifications: Lasdpehga S Djfx Apdeg ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines in the CD25 series are compact high-pressure cleaners, with pressures ranging from 170 to 500 bar and a flow rate of 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for long-lasting durability and corrosion resistance. The powder coating ensures a very attractive appearance. The machine has very compact dimensions of 1200mm x 800mm, which corresponds to the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eye. This enables very easy transport. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Laedshgbfhopfx Apdeg Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General specifications: ----- Max. pump speed: 1750 rpm Drive engine: Kubota Diesel 3 cyl., water-cooled Drive engine power: 18.6 kW Drive engine speed: 3000 rpm Tank: 28 L Max. fuel consumption: 5.7 L/h Noise level (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Includes standard accessories.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm Lasdpfx Aexgua Aepdeg - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each Lsdpfx Apoxgumcodsag – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 480 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Lajdpoxawlbjfx Apdog

Condition: new, mileage: 1 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Number of doors: 5 Cab: single Number of cylinders: 4 Ledpfx Apeygtc Djdeag Engine displacement: 2,200 cc Overall condition: very good Technical condition: very good Visual condition: very good Damages: none Warranty: none

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The CD50 series of our high-pressure machines covers a pressure range of 230 to 2000 bar and a flow rate of 7 to 74 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosing frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine requires only a footprint of 1550 x 920 mm. Four rubber feet are mounted under the frame. In addition, the machine has forklift pockets and lifting eyes attached to all four corners. A galvanized roof plate provides protection and storage for high-pressure hoses, for example. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow Rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General specifications: Laedehgbf Espfx Apdeg ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl., water-cooled Drive engine power: 37.3 kW Drive engine speed: 1800 rpm Tank: 90 L Max. fuel consumption: 10.0 L/h Noise level (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg) Includes standard accessories.

Condition: used, JET Cylindrical Grinder 7.5 kW Motor 2-Speed Settings Laedpfxezb H Euj Apdsg Max. workpiece width: 610 mm Max. workpiece height: 130 mm Machine is ready for operation.