Used Kaeser Aquamat 4 for sale (57,684)

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Hsdoyhpqtopfx Akzjn Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Condition: repair required (used), Year of construction: 2006, Screw Compressor Hodpfxoy Sgldj Akzen Manufacturer: Kaeser Model: DSD 201 SFC Year of manufacture: 2006 - Frequency converter defective – Not operational Power: 110 kW Pressure: 10 bar

Condition: excellent (used), Year of construction: 2008, Refrigerated dryer Manufacturer: Kaeser Model: TE 121 Year of manufacture: 2008 Hedpfxey Sgh Ee Akzen Volume flow: max. 12.7 m³/h

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of Manufacture: 2008 Hjdpfsy Sghfox Akzsn Load Hours: approx. 29,050 h Idle Hours: approx. 47,458 h Free Air Delivery: 3.2 m³/h Power: 18.5 kW Pressure: 8 bar Air-cooled, can be converted for heat recovery.

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of manufacture: 2008 Load hours: approx. 32,337 h Idle hours: 47,455 h Volume flow: 3.2 m³/h Pressure: max. 8 bar Power: 18.5 kW Hjdpfx Akjy Sggujzjn - Panel damage at rear - Air-cooled, but can be converted to heat recovery

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Hodov A Rq Tjpfx Akzsn Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: excellent (used), Year of construction: 2014, operating hours: 77,600 h, functionality: fully functional, Screw compressor Kaeser DSD202SFC 110 kW 10 bar Hjdsyr Dbnepfx Akzon 20.30 m3/min Integrated frequency inverter. Stage replaced once. New oil filter and oil.

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Hsdpfx Asyvkamjkzen

Condition: excellent (used), Year of construction: 2019, KAESER ASD 60 Screw Compressor, machine serviced Technical data: capacity: 5.53 m³/min (5530 l/min); motor power: 30 kW; pressure: 8.50 bar operating hours: 15,697 h year: 2019 Hedpfx Aoy Idb Iokzsn net price: 34,000 PLN gross price: 41,820 PLN The compressor is fully operational. Service support offered. Below is a link to a video showing the machine in operation.

Condition: excellent (used), KAESER SM11 screw compressor, machine after service, with air dryer mounted on a 270L tank Technical data: Capacity: 1.05 m3/min (1050/min) Hsdpoy Ic Rzsfx Akzon Motor power: 7.5 kW Operating hours: 15,259 h Pressure: 7.5 bar Net price: 12,500 PLN Gross price: 15,375 PLN Compressor is fully operational. Service support provided. Video below.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, KAESER AS36 SCREW COMPRESSOR 22kW Technical specifications: Capacity: 3.47 m³/min (3470 L/min) Motor power: 22 kW Hedpfsy Ic Hvox Akzon Pressure: 7.5 bar Year of manufacture: 1994 Operating hours: 13,881h Net price: 8,200 Gross price: 10,086 The compressor is fully operational. Service support provided.

Condition: like new (used), Year of construction: 2020, operating hours: 14,660 h, functionality: fully functional, Kaeser SK22 Screw Compressor - Premium 11 kW Hedpfxey Av Amj Akzen 11 bar 1.86 m³/min Year of manufacture: 2020 Operating hours: 14,660

Condition: good (used), Year of construction: 2000, ENGINE : Manufacturer : KAESER Model : SIGMA 33 Machine type : 90 kW engine Year of manufacture : 2000 Serial no. : 1340, Pressure : 15 bar Hsdpjumadtofx Akzsn SCREW STAGE : Manufacturer : SCHORCH Model : KA7317S-8X3Z-350 Machine type : screw stage Year of manufacture : 2000 - 960kg - 1785 RMP

Condition: excellent (used), Year of construction: 2004, volume flow: 0.7 m³/h, pressure (min.): 9 bar, pressure (max.): 9 bar, Equipment: refrigerant dryer, KAESER SX 7 screw compressor Motor: 5.5 kW Capacity: 0.7 m3/min. Hjdpfoy Hri Rex Akzon Pressure: 9 bar Operating hours: 6,444 h

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hodpfsyma Tisx Akzjn Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Number of shafts: 4 pcs of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: good (used), functionality: fully functional, power: 129 kW (175.39 HP), overall weight: 2,800 kg, fuel type: diesel, axle configuration: 1 axle, Year of construction: 2016, operating hours: 1,757 h, Volume flow: 13.5 m³/min at 12 bar Engine: Deutz TCD6.1L06 Engine power: 129 kW Hedpfx Akeyzq S Tszjn Emission stage: TIER IIIB Compressed air treatment G consisting of: aftercooler, water separator, PD filter and reheating Operating weight: 2,800 kg Dimensions: 4,920 - 5,300 x 2,100 x 1,850 mm (L x W x H) Exhaust aftertreatment: diesel particulate filter and SCR catalyst

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Hsdjd Tbbdspfx Akzon - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Hjdpfjfdkb Tox Akzen Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Hjdpfxod Tqale Akzjn Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Hodpfx Ajfdkb Ujkzen - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Hsdpfeguk A Hsx Akzen Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Hsdofdkbhepfx Akzjn - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Hedpfx Aoguk Dkokzon - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Hedpfeguk Dvox Akzsn When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, functionality: unexamined, Kaeser CB131 C – Blower Compressor / Rotary Lobe Blower Technical data: • Rated drive motor power: 15.0 kW • Maximum final pressure: 1.81 bar • Capacity: 7.93 m³/min (≈ 475 m³/h) • Block speed: 3,560 rpm Hodpfx Akoy Idqiezen • Permissible ambient temperature: 3 – 40 °C • Total weight: approx. 570 kg Location: 6460 Imst, Tyrol (Brennbichl 20) Note: The machine is located in a basement room and must be removed before collection. Offered for sale by Auction House Köck on behalf of the insolvency administrator. Viewing possible by appointment.