Used Kia Super Turn 15 for sale (24,098)

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, Ledpofxphlofx Akmoru very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotator table Complete set including dual foot pedal control and hand-held control with digital display 5000 kg load capacity Ljdsfkt Ebepfx Akmeru Diameter of clamping plate: 1500 mm Height in horizontal position: 1500 mm Height in tilted position (to center): 1500 mm Speed continuously adjustable from 0.01 to approx. 0.7 RPM Tilt up to 120° Length: 2100 mm Width: 1500 mm

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Lsdpfxsfky Iqj Akmjru Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Lrsdpfsff Ngisx Akmsu Speed: 0.05 to 0.8 revolutions per minute Very robust, complete set with hand-held and dual-foot remote control Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg.

Year of construction: 2022, condition: as good as new (ex-display), 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400 mm Tilt up to 120° Height in horizontal position 1300 mm, tilted to the center 1050 mm Length 2.0 m x width 1.4 m Lrodpfx Akjd A Etromsu Hand and foot remote control

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Height: min. 0.65 m, max. 1.530 m. Lredpfx Aed D D Hlekmou Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Condition: used, Year of construction: 2002, turning diameter 340 mm turning length 600 mm turning diameter over slide 300 mm control Siemens 840 D spindle passage 55 mm spindle nose ASA 6 number of spindle speeds 4000 U/min spindle motor 27 kW Number of tools 12 VDI 40 driven stations 12 VDI 40 rapid traverse 30 m/min power sub spindle 15 kw CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring Ledpjxvdrajfx Akmjru

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Container turning device, 30-ton capacity, 400 V, 32 A Dual drive motor, synchronously controlled For container diameters from 570 mm to 4500 mm Continuous speed control via remote control, right/left rotation Forklift mounting Roller diameter 350 mm x 180 mm PU Speed 100 - 1000 mm/min. Drive motor 2 x 1.1 kW Dimensions approx. 2750 mm x 500 mm Ledowinxaepfx Akmsru Total weight 1200 kg Dual drive, synchronously controlled New machine, special price Total weight 1.9 tons

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg Ljdpfxexhgfms Akmoru

Condition: new, functionality: fully functional, operation weight: 175 kg, Year of construction: 2026, Equipment: CE marking, DB15 - one mesh screener running on 230V, easy to operate, and transport. Weight 175kg. Pull out handle and wheels for easy handling. Mesh mounted of any size from 2mm to 80mm. Lrsdjxn Sflopfx Akmju

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Equipment: foot remote control, 30 tons lifting capacity, self-centering, new 380V Hand and foot remote control Rotational speed 100 - 1000 mm/min. Diameter range 600-4500mm Drive wheel diameter 350mm x width 180 Lodpowrpfgsfx Akmsru Material heat-resistant PU, non-slip Dimensions: 2350 x1460 x 1050 Double drive synchronous

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 8700 € Lredpfx Akox Urrbsmou 167.91 € 10000 kg 5000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, load capacity: 1,000 kg, Column lift turning device 1000 kg load capacity, mobile with 2 pallet trucks Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of manufacture: 2024 Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm (adjustable at extra cost) Ljdpfxewulnps Akmjru Vertical adjustment: 900 mm Clamping plate diameter: 500 mm Rotary drive: 0.4 kW Lifting motor: 2 x 0.4 kW Various column lift turning devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Turning length -982 mm Swing Diameter -610 mm Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Misc. accessories MARCELS MASCHINEN CH Lredpfeu R Nd Esx Akmju

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Ledpfx Asynmx Iekmoru Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Lodpfxszqt Ums Akmeru Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories. Lrsdpjyq R T Ijfx Akmou

Condition: used, mileage: 2,00,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 7498D ----Why Autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. The entire vehicle range is available on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively maintained at Mercedes-Benz Next service due in 20,300 km Like-new rear brakes Like-new all-season tires (front) Body: Maxi Tourer Number of seats: 15 Roof air conditioning Regulated air conditioning (Tempmatik) Auxiliary heating Electr. side step Rearview camera Lane keeping assist Navigation system Microphone Lrsdpfx Ajyrwvrjkmsu Roof window Upon request, we offer an optional trailer coupling retrofit for only €599. If possible, we can also increase the trailer load capacity up to 3.5 tons. ---- Special equipment: * Auxiliary heater (air), electric * Generator 250 A * Audio system Audio 15 (radio with color display) * Outside temperature display * Battery disconnect switch, 1-pole * Roof control panel with reading light, driver/passenger side * Entry lights * Driving assistance system: Lane keeping assist * Digital tachograph, downloadable * Window for rear doors * Window in cargo/passenger compartment: - fixed, rear left * Window in cargo/passenger compartment: - fixed, rear right * Window in cargo/passenger compartment: - fixed, center left * Window in cargo/passenger compartment: - fixed, center right * Window in cargo/passenger compartment: - fixed, front left * Window in cargo/passenger compartment: - fixed, front right * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Light and rain sensor * Front engine drive with carrier for additional coolant compressor * Spare wheel in driving condition * Spare wheel holder under frame end including jack * Rearview camera * Interior rearview mirror * Mud flaps, front * Seat equipment: Comfort headrest, driver's seat * Seats in the driver's cab: Driver's seat Comfort * Stabilizer, rear * Stabilizer, front, reinforced * Shock absorbers, reinforced * Tank sender for auxiliary heating * Trim in cargo/passenger compartment: Standard * Fleece battery 95 Ah * Preparation for additional heat exchanger * Front axle, reinforced * Thermal insulation, driver's cabin * Thermal insulation, cargo/passenger compartment * Heat-protective glazing (windshield with band filter at the top) * Auxiliary heater (hot water) * Intermediate limitation, sliding door of the cargo area Standard equipment: 3rd brake light, Adaptive brake light, Airbag, driver side, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirror, electrically adjustable and heated, both sides, Exterior mirror with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in driver's cab, Electronic stability program (ESP), Power windows, electric, 2-way, Transmission 6-speed - TSG (Eco Gear), Glove compartment, lockable, Rear door (opening angle 180 degrees), Body/structure: Box van, high roof, standard, Child safety lock, Fuel tank: Main tank 75 liters, Load compartment partition, continuous, Load securing / lashing points, Headlamp range adjustment, Model refinement, Engine 2.1 L - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Smoker package, Emis

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Lodpfx Akjzx Nxkemjru Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Lrsdpfx Ajzkpupokmeu Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V01496, Year of construction: 2019, operating hours: 10,328 h, load capacity: 1,500 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Free lift: 1,519 mm Overall height: 2,121 mm Load capacity: 1,500 kg MACHINE DETAILS Mast type: Triplex Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 24 V Operating hours: 10,328 h EQUIPMENT Side shifter 3rd valve Lrjdpfx Aksz I Nc Sjmju External reference: SL15861SP

Condition: used, mileage: 2,29,000 km, power: 200 kW (271.92 HP), first registration: 10/2015, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,230 mm, loading space width: 2,470 mm, loading space height: 2,097 mm, Year of construction: 2015, Equipment: ABS, electronic stability program (ESP), tail-lift, We are very pleased that our offer has aroused your interest and can already assure you that you will be able to purchase a good and affordable vehicle with a comprehensible service history from us! Certified Dinkel swing-wall body with rear cargo securing system AHK drawbar coupling AHK ball coupling (can be retrofitted) LBW Bär tail lift 15 pallet spaces Special equipment: Front axle load 6.1 t, trailer brake 2-line, trailer coupling: G 145, trailer socket 24V / 15-pin, audio system: CD radio, battery 165 Ah, differential lock rear axle, compressed air unit medium, air horns (2) on the cab roof, cab variant: S (short with extended rear wall), suspension: front springs 6.1 t, electric windows, fire extinguisher, heated windshield, heated fuel filter, fuel tank: 180 L plastic, enhanced engine brake, frame overhang - extension, spare wheel, reversing warning (audible warning signal outside), switch for loading platform, rear crossmember for trailer coupling, seats in the cab: driver's seat armrest, seats in the cab: driver's seat comfort suspended seat, exterior sun visor, voltage converter 24V / 12V 10 A, steel rims 8.25x19.5, storage compartment outside on the frame, underride protection lateral, CB radio preparation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, approach / front mirrors, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable, left, cockpit classic, compressed air tank steel, entry two-stage, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf / air, urea tank (AdBlue): 25 L, manual roof hatch (steel), rear axle differential 390, info display 10.4 cm with additional display, body / superstructure: chassis, engine 7.7 L - 200 kW R6 diesel (OM 936), engine compartment encapsulation, wheelbase 4160 mm, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger single seat, fixed, splash guard rear fender, stabilizer rear axle, tachograph / EC control unit, daytime running lights automatic, underride protection rear fixed, underride protection front, immobilizer, permissible total weight 15.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING or FINANCING offer. Lrodpfxezmpmks Akmju SERVICE TÜV / MOT / UVV LBW / LGS inspection / tachograph inspection / installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD TOLLS Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our terms and conditions. The information on the internet is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Ljdpfx Aoz Hmc Tokmsru Tool length: max. 500 mm

Condition: like new (used), Year of construction: 2025, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Lsdpfew D Rhaox Akmeru Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Lodpoxh Ruljfx Akmoru Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control