Used Kib Heating Press for sale (26,915)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, bale length: 1,100 mm, bale width: 800 mm, bale height: 1,200 mm, bale weight: 450 kg, total width: 2,100 mm, total height: 2,150 mm, total length: 4,870 mm, overall weight: 5,000 kg, power: 11 kW (14.96 HP), DIXI SLS 60, working condition, little bit modified, added full wall for pushing the bale out, detailed information in attachment, last two pictures is from 07.2026 Dsdpfx Aozi A Iysm Tsuw

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t Duedpfx Amsu Nfhds Tsw space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Dusdpfx Amsr Iyrme Tew Bonding patterns: line: - square plate 640x320 mm - parallel parallel plate 640x320 mm

Condition: reconditioned (used), functionality: fully functional, overall weight: 550 kg, total length: 730 mm, total width: 770 mm, total height: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider-Rounder Fortuna Automat A 4 H Dough dividing and rounding machine TOP model bun press Very robust engineering! With rounding deactivation Head cleaning position Dividing head newly overhauled, 30-division Spare parts service With NEW stainless steel blade Only from us: DGUV V3 tested 3 rounding plates Duedpfxsy Rhg Tj Am Tsw Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (W x D x H) Refurbished and SAB-tested used machine With warranty Visit our large showroom!

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Dedpfx Ameywadwe Tjuw Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Djdpfszixq Dex Am Tsuw

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Dsdpfxezfwycs Am Tjuw Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Dujdpfx Amszfwx Ss Tjw Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air. Djdpezfwx Eofx Am Tjuw

Condition: used, Year of construction: 2021, controller model: LVD Touch-B, _____ Description: Year of manuf. : 2021 Control : LVD Touch-B Working length : 3050 mm Pressing force : 1350 kN Technical Specifications Pressing force:1350 kN Bending length:3050 mm Usable installation height:400 mm Column clearance:2600 mm Control system:Touch-B Weight:9600 kg Features Axis Stop:CNC axis stop with 2 fingers Angle Measurement System:LVD Easy-Form Laser Support Brackets:2 pieces Safety System:Optical laser system included Foot Switch:Yes Touchscreen:Yes Duedpfxjzig Tgj Am Tsw

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Dedpfsziy Dfox Am Teuw Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dsdpezkr Tbjfx Am Touw Yorick Diebels

Condition: ready for operation (used), Clamping force: 1000 kg Overhang: 150 mm Arbor diameter: 40 mm Table diameter: 170 mm Installation height: 300 mm Dedpfx Amezi A Tpe Touw Space requirement: 420 x 380 x 1500 mm

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Duedozi A I Tjpfx Am Tow Stroke: 240 mm Overhang: 150 mm Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm

Condition: excellent (used), The original German Hang Piccolo binding machine is designed for punching holes and attaching metal eyelets to paper, cardboard, and other materials used in binding. The device features a convenient foot-operated drive, allowing for quick and precise operation while keeping the operator's hands free to position the material. Technical specifications: * Manufacturer: Hang * Model: Piccolo * Type: binding press / eyeleting machine * Drive: foot-operated (pedal) * Cast iron construction Dujdpszgvnzsfx Am Tew * Work table included * Made in Germany Applications: * Eyeleting documents, * folders and binders, * calendars, * hang tags, * labels, * promotional materials, * binding operations. Condition: Used machine, in good visual condition. Condition as shown in the photos.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.4 kW (105.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 682 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 80.2 kW (109.04 HP), AIRCOOLED CHILLER/HEAT PUMP PANASONIC P-AQAZ0075HA.EC 77.4 KW/80.2 KW Cooling capacity: 77.4 kW / 22.01 tons (12/7 — 35°C) Duodpszi Dq Aefx Am Tjw Heating capacity: 80.2 kW / 22.8 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland YP154K1T-TFD-GCV (scroll) + 1 pcs. Copeland YP182K1T-TFD-GCV (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Dimensions: 1.16x2.18x2 m Weight: 682 kg Working hours: 60/68 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. Duodpfx Aoy Uiyvsm Tjw The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 266 kg, input voltage: 400 V, total width: 1,480 mm, total length: 510 mm, total height: 2,010 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB42FPJMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2T/0,45 COIB, buffer tank 112 l. Dimensions: 0.51x1.48x2.01 m. Weight: 266 kg. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Duedpjzi Dhnsfx Am Tew Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 349.6 kW (475.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,160 mm, total height: 2,450 mm, warranty duration: 12 months, heating capacity: 363.1 kW (493.68 HP), AIRCOOLED CHILLER/HEAT PUMP AERMEC NPG1200A4 349.6 KW/363.1 KW Cooling capacity: 349.6 kW / 99.4 tons (12/7 — 35°C) Heating capacity: 363.1 kW / 103.24 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. 4-pipe system Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland YP485K1T-TED-GCR (scroll) + 2 pcs. Copeland YP233K1T-TED-GCR (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (Frequency inverter) Dusdjzi Ddispfx Am Tow Dimensions: 5.16x2.2x2.45 m Weight: 3800 kg Working hours: 105/105/630/630 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Dsdpjzgtz Sofx Am Teuw Ideal for saddlery, footwear, and upholstery workshops.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 330553, Heidelberg KORD offset printing press, 1-color, machine number 330553, 46 x 64 cm, in good condition, available immediately. Duedpfx Aozivg Aom Tsw If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment.

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Dedpfszc Rhvox Am Touw Accessories: ruffler and special press ram

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm Dedpfx Asw U Ekpsm Tsuw ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Dujdpfxjvuucqe Am Tsw Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 2018, operating hours: 2,442 h, total length: 4,100 mm, total width: 2,000 mm, total height: 2,700 mm, Colour: White Weight: 8.500 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24619 - Operating hours: 2442 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 15.8 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 120 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Standard Dsdpezkkp Uefx Am Tjuw - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4100mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum