Used Knapp Smart Solutions Gmbh Multiscan 600 for sale (78,276)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Dksdpfxjzizkyo Am Top Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), WAGNER UGH-Z1-Q 1000 Automated Guided Vehicle (AGV) System For sale: Automated Guided Vehicles (AGVs) from the premium manufacturer ek robotics (formerly ek automation), built on robust WAGNER chassis. These vehicles come directly from a Mercedes-Benz plant, where they were used for precise, automated material transport. Due to their use in the automotive industry, the units have undergone rigorous maintenance in accordance with the highest quality and safety standards. The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional safety laser scanners: High-end sensors for personnel and obstacle detection. An ideal opportunity for logistics companies looking for high-end spare parts for existing systems, for parts recyclers, or for ambitious automation projects. Technical Data Chassis Manufacturer: WAGNER Fördertechnik GmbH & Co KG Model / Type: WAGNER UGH-Z1-Q 1000 Rated Load Capacity: 1,000 kg Total Weight (incl. battery): 2,980 kg System Voltage: 48 V "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Dodjzklktopfx Am Tjkp Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1997, functionality: fully functional, compressed air connection: 6 bar, We are offering this used runner machine, model KA 2000/1, manufactured in 1997, for sale. Manufacturer: Weimer Maschinenbau GmbH Dedszixu Aepfx Am Tekp Type: KA 2000/1 Year of manufacture: 1997 Serial number: 50700788 Country of manufacture: Germany The dimensions of the boards and blocks are as follows: Runner board length min. 700 mm, max. 1600 mm Runner board width min. 60 mm, max. 150 mm Blocks min. 60 mm, max. 150 mm Nails min. 25 mm, max. 110 mm Up to 3 blocks can be used per runner. The machine was overhauled by Weimer in 2018 and equipped with a safety system including a fence. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, Rico Unpacking System Varia with S7 control The machine is dusty but in good condition. Dedpfx Amoziwyqs Tokp

Condition: excellent (used), Year of construction: 2019, Pack-Tec inline palletizer, year of manufacture 2019 Dodpoziwx Hsfx Am Tjkp Handles 6, 12, and 20 crates. Requires minimal floor space.

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center Djdpfx Amjdz Spwo Tokp - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Note: The machine can also be offered in a version with a tensile force of 90 KN (9 tons) or 120 KN (12 tons). ===== Currently available at special conditions ===== - Used machine currently available! ==> Information for manufacturing companies or dealers with their own production: The drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a version with a 9-ton tensile force) of the broaching machine can possibly be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us on a project basis after the order is placed. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gears, etc.) and accessories are available. Please inquire separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly in our plant in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: Dkedpfjuqbnhex Am Tsp 60 KN version: The application area is primarily in the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact machine, which requires little space, can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is provided by a pole-switching gearbox brake motor. The maintenance-free twin-spindle drive ensures smooth operation and a central pulling point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be clamped firmly. The stroke adjustment is carried out by adjustable limit switches with stroke limitation. For short hubs/workpieces, several workpieces can be placed on top of each other. Broaching tools, mandrels and spare parts on request. Technical data: Tensile force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min) possible with extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 volts 50 Hz Control voltage: 230 volts Operating voltage: 400 volts 50 Hz Painting: Exterior RAL 7035/7036/7016, interior RAL 3000 Safety door: standard equipment Coolant system: standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml Dksdpsyq Hgkefx Am Top ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Dsdjzilz Nepfx Am Tskp Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG TOC/TNb analyzer, multi N C 3100 Model: multiNC3100 Condition: Used Technical specifications: 230V AC 50/60Hz 1000VA General: Operating temperature +10 to +35 °C (air conditioning recommended) Maximum humidity 90% at 30 °C Air pressure 0.7-1.06 bar Storage temperature +5 to +55 °C Humidity during storage 10-30% (use desiccant) Altitude (maximum) 2000 m Accessories: Documentation Dkedpfjzh Irujx Am Top Power cord Software

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Dkedozh Iqwspfx Am Tsp Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ Dsdpfszka Ruex Am Tjkp N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. Dodpef Dc D Hofx Am Tjkp 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Dsdpfx Amjx Emguj Tskp Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Dkodpowzkuzsfx Am Top Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Dkedpfx Aot Hxagsm Tsp Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm Dkjdjt Hwwqepfx Am Tep max. module 16/18 min. module total power requirement 10 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: new, Methanol Loading Pump Type: KRH-150/280-308/CN 3 units Centerline-mounted, single-stage overhung pump according to API610, 11th edition, type OH2 Methanol Slop Pump Type: KCV-32/160-308/CN-2700 Dkedpfx Ajzh Ik Dom Tsp 1 unit Vertically suspended, single-casing, volute, line-shaft-driven sump pump according to API610, 11th edition, type VSA

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Dksdpfxjif Ek Rj Am Tjp Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Dodpfx Aefnlkwsm Tokp Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: new, MyEnergyBox – The turnkey energy storage solution for businesses and municipalities, as well as private households with electric vehicles. Do you want to reduce your energy costs, minimize peak loads, and become more independent from the power grid? With MyEnergyBox, you receive a completely pre-assembled and ready-to-use energy storage solution for commercial, industrial, agricultural, hotel, municipal, residential, and energy-intensive operations. Your advantages: ✅ Reduce electricity costs – up to 50% depending on the application ✅ Reduce peak loads (peak shaving) ✅ Optimize self-consumption of photovoltaic systems ✅ Emergency power supply in case of power outages ✅ Connection of e-charging stations possible ✅ Expandable and modular design ✅ Safe LiFePO4 battery technology ✅ Integrated climate control ✅ Robust steel container design ✅ Delivered ready to use Ideally suited for: Djdpfeziuzxsx Am Tekp - Industrial companies - Production facilities - Agriculture - Hotels - Municipalities - Swimming pools - Cold storage facilities - Logistics companies - Car dealerships - Operators of e-charging infrastructure Technical data and prices, see attached images.

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Dkedpfx Amjwuqp Ej Tjp

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Dkodpfowuti Usx Am Tep

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor length 1000 mm, power 45 kW + 2.2. Hopper size 1400 x 1000 mm, screen size available upon request. Optional conveyor belt available. Dedpokzg U Djfx Am Tskp Delivery upon request. For more information: RSS Recycling Shredders & Solutions. For inquiries or questions, please contact [company name], including the name, company, and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators screen your request Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Dkodpfxog Ainqj Am Tsp Call or email us for consultation or if you have any questions, important! name company name and telephone number.