Used Lhermite - James Burn Machine For Punching Paper For Spiral Binding for sale (70,406)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, pay attention to your CO2 footprint. The machine for processing continuous corrugated board, listed here, belongs to the series of statically operating machines, meaning that the operations performed across the width of the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 1,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting group for head/foot cuts and cross cuts on the cardboard. Linear cross-scoring group for cross scoring on the cardboard. (Delivered as a cross scorer, cross scorer with perforation option) Nwsdpez Tdaqefx Airen 8 sets of longitudinal scoring groups from above for longitudinal scoring on the cardboard. 8 sets of longitudinal cutting groups for performing longitudinal cuts. 2) Cardboard changer, 4-cassette feeder A motorized cardboard changer, operated with a lifting shaft, is used to feed the cardboard into the cardboard infeed of the main machine body, using 4 individual cassettes. Each cassette is capable of accommodating a web width of raw material up to a maximum of 1,800 mm and automatically feeding it to the main machine body on request from the machine control. 3) Cardboard magazines, 4-fold 4 cardboard magazines provide and feed the raw cardboard to the processing machine. Stack height of continuous corrugated board up to max. 1,500 mm possible. 4) Control cabinet, control system, electronics: Contains all the components required to operate and control the system. The control cabinet components are based on Siemens.

Condition: refurbished (used), SEMI-AUTOMATIC EDGE BANDER MAGRAF CM-01 Nwodpfx Ajz S Dtnjirsn USED/SERVICED Two stainless steel cylinders for applying the adhesive, with a working length of 55 cm, and the corresponding three-phase electric motor of 180 W. Four chrome rollers for pressing (bonding), with a working length of 75 cm, and the corresponding three-phase electric motor of 550 W, and a brake.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg Nwedpfx Aio Ad Hk Eersn The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive Nwodpfjz Rl Iwsx Airon - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nwedpfxjzg U R Ie Airen Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz Nodpfx Aijz N Shnorswn instruction manual included and a large set of materials. Ask About The Product

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. Nwedpfez N Shusx Airjn The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Nwsdpfx Aijz Smzisrjn Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Nedpfx Aiszwxwgsrswn Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free   Njdpfxjz R Ri Ij Airswn - 780 punching strokes per minute - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: good (used), Zechini Angolar M automatic corner cutter Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Nwjdpjz N Silefx Airjn Stack height 50mm Weight 110kg Efficiency 40 cycles/min Power supply 400V This is the currently produced model.

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Nedezd Ulaspfx Airewn Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm Nwodpfx Aisz Aawxorjn - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Nwedpfjzxdhmex Airsn Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Nsdpfx Aiozp D H Dorewn Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm Nodjwirkgepfx Airswn 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP25 Year of manufacture: 1983 Machine number: 703 Machine type: Punching machine Press Data Nsdpfo Ad Iiijx Airjwn Press force: 25 t Stroke: 8–60 mm Stroke rate: 100–500 min⁻¹ Flywheel diameter: 125 (?) Work table Table dimensions: 470 × 450 mm Table slots: 4 MACHINE DETAILS Drive power: 4 HP Dimensions (L × W × H): 1,500 × 1,200 × 2,000 mm Weight: 3,000 kg

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Nodpfxez Dvfxo Airswn Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: used, functionality: fully functional, Year of construction: 1990, degree of automation: manual, punching force: 20 t, Equipment: emergency stop, foot remote control, Well-maintained machine in good working order, but without any additional tools. Nwjdpez I Tqgsfx Airjn

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Njdpfx Aez I Tgueirjwn Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control Nwedpj Afv Szofx Airon ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Njdoxz A Tmepfx Airswn Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Nodpfxoxz D Ncs Airown Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Nsdpsz Dh I Esfx Airswn Binding method: Hot-melt adhesive perfect binding Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Spine preparation: Milling and roughening station Features and Equipment: 5 binding clamps Automatic cover feeder Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Glue system: Hot-melt adhesive.

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: foot remote control, Hydraulic punch and shear machine in good condition. Nwodpsz S Izpjfx Airjn