Used Liebherr Loader for sale (3,801)

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, headboard, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Prsdpfx Abjztqvtopea

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Podezpcu Tspfx Abpsra Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Psdpfjzwcwqex Abpjra

Condition: used, power: 132 kW (179.47 HP), fuel tank capacity: 290 l, color: yellow, lifting height: 2,800 mm, Year of construction: 2021, operating hours: 3,450 h, Year of manufacture: 2021 Podpfxowk Hglo Abpora Empty weight: 14.255 kg Carrying capacity: 4.691 kg GVW: 18.946 kg Dimensions (LxBxH): 707 x 248 x 336 cm

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide, with grating on the ramps. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area slopes towards the rear. Internal loading area width: 2,480 mm. Removable rear overhang. Front design allows for through-loading. Vehicle with temporary registration. Also available with a 5,300 mm loading area length!! Rental price starting from 500 €. Subject to printing errors, errors and changes. Sample images. More details under: ! Predpfx Abozwkxvopoa

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Predpfx Asy Ax Tusbpea

Condition: new, functionality: fully functional, Year of construction: 2026, TI-CAR universal loader 225 The Polish company TICAB offers its own equipment for patching and road maintenance. OUR ADVANTAGES: - we are a manufacturer, - our equipment operates in 57 countries around the world - availability of finished products in stock, - fast execution of individual orders, - production capacity of 50 units per month, - own engineering and design bureau - 12 engineers - 15 years of experience in mechanical engineering, we have been working since 2009 We offer the TI-CAR 125/225 forklift model as a universal working machine. The stable boom allows you to easily and safely lift loads with pallet forks. The adjustable steering wheel and comfortable seat suspension reduce fatigue from travelling. The dual-pedal steering system allows you to control the movement with amazing precision, even with demanding attachments and difficult terrain. The TI-CAR is an effective tool for a variety of jobs in construction, agriculture, municipal services, with alternating loading into the body, snow removal, soil moving, transporting cargo, levelling the surface. Technical characteristics: Engine - Kubota (Japan), model - 1105; cylinders - 3, or Yanmar (Japan), model 3TNM72 Podjvprpkspfx Abpora Engine power - 18 kW/25 k/s, Cylinder capacity (cm³): 784-1120 Cooling system - liquid; Hydraulics - HANSA (Italy), Battery (V-Ah): 12-65 Generator (A): 40 Maximum torque (Nm): 72-77,6 Operating speed of the engine, rpm - 3000 The maximum engine speed without load is 3600 rpm; Maximum lifting capacity to a height of 50 cm, kg-800-90 Tipping load with a straight frame, kg-480-780 Tipping load with a bent frame, kg-350-500 Boom lifting time, sec-2.8 Boom lowering time, sec-2.1 Loader weight, kg 1000-2550 Maximum lifting height, mm -2100-2860 Boom self-levelling - for model 225 Operating volumes: Cooling system, (l): 3,1 Engine oil, (l): 5,11 Fuel type - diesel (fuel tank - 18 l) Hydraulic tank (l): 44 Total capacity of the hydraulic system (l): 48. Driving characteristics: Travel speed (km/h)-0-13, Breaking angle-56°, Turning radius in place-1.63 m Boom lift with tipping bucket 210 cm. Wheelbase: Outer wheel diameter (inch) - 23’ Inner diameter of the disc (inch) - 12’ Tyre width (inch) - 8.5’ The cost of the forklift* is as follows Ti-Car 125 - 20450 € with PDS Ti-Car 225 - 22450 € including VAT *All prices are calculated in UAH at the NBU exchange rate on the day of signing the contract Attachments: - Cylindrical sweeper -4800 €. - Brush with a garbage hopper with self-unloading function - 5500 € - Bucket for transporting cargo - 650 €; - Fork for stacking - 650 €; - Blade for snow removal - 1200 €; - Silo fork - 1300 €. - Jaw bucket -670 €. ATTENTION!!!! The standard price for the equipment is 27,460 EURO, but we are currently offering a discount of 5,000 EURO!!!!!

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 6,000 mm, free lift: 1,880 mm, fuel type: electric, mast type: triplex, construction height: 2,340 mm, fork carriage width: 1,530 mm, fork length: 1,500 mm, empty load weight: 7,610 kg, total length: 1,740 mm, drive type: Elektro, construction width: 1,650 mm, Four-way side loader Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Prsdpfozpb Thjx Abpea ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 21x9x15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 355/50-15 Rear tire condition: 80 - 100% Battery voltage: 72V Battery capacity: 775Ah Battery manufacturer: Energizing Battery type: PzS Battery condition: New Integrated side shift ( +/- 100mm) Rear work light, front work light, heater, fully enclosed cabin, CE certificate, Fully enclosed cabin (including all windows, windshield wipers, and heater) Safety light 4 LED work lights with protective grilles (2 front, 2 side) Flashing light Reversing alarm USB power supply Color: Green/Gray

Condition: new, empty load weight: 2,780 kg, maximum load weight: 7,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing points at 2.5 t each, 8 lashing points at 6 t each, wooden planks 50 mm thick, loading area sloped at the rear, removable rear ramp, front design for drive-through loading, vehicle with day registration, also available with a 5,300 mm loading area length!!, rental price starting from 500 €, -- printing errors, mistakes and changes reserved, sample images --, more data at: !, More Details: ! Prodezvly Ejpfx Abpoa

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 tie-down points, each with a capacity of 2.5 tons, 8 tie-down points, each with a capacity of 6 tons, steel sideboards, foldable and removable, wooden planks, 50 mm thick, loading area sloped at the rear, interior loading area width 2,480 mm, rear underride guard removable, front section for drive-through loading, vehicle with temporary registration, also available with a loading area length of 5,300 mm!!, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Prodpfxszwk Dxj Abpea

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 tie-down points, each with a capacity of 2.5 tons, 8 tie-down points, each with a capacity of 6 tons, steel sideboards, foldable and removable, wooden planks, 50 mm thick, loading area sloped at the rear, interior loading area width 2,480 mm, rear underride guard removable, front section for drive-through loading, vehicle with temporary registration, also available with a loading area length of 5,300 mm!!, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Pjdozvvh Tepfx Abpera

Condition: used, Year of construction: 2006, operating hours: 9,237 h, Equipment: all wheel drive, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157kW / 213 hp * Weight: 19.8 t * Tires: Michelin 23.5-25X Type A approx. 60% * Reversing camera * Steering wheel control * Air conditioning * Tow pin * Central lubrication system * Suspension seat * Radio pre-installation Other details: * 1 previous owner * German machine * CAT service records maintained * Last service at 9,003 h * Signs of use * Rust present Since 1972, your reliable partner for all matters concerning automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously offers approx. 200 vehicles, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special low rates. If interested, we will be happy to provide you with an individual quote! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offers generally come WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional fee. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Equipment listed may require separate verification. Subject to prior sale and errors. Prjdpfezlvm Usx Abpoa

Condition: new, maximum load weight: 73,540 kg, overall weight: 1,02,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Podpfx Abjxbmplspora * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: used, Year of construction: 2021, Extendable superstructure: Yes Psdjzl Exaspfx Abpora Please contact Theo Lelie for more information

Condition: new, Year of construction: 2025, operating hours: 1 h, Chassis type: articulated Make of engine: Electric Lifting capacity: 400 kg Bucket capacity: 0,2 m³ Dimensions of cargo space: 326 x 109 x 2185 cm Top speed: 18 km/h Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Please contact Robert Vijn for more information = Additional options and accessories = - Additional hydraulics - Auto / hydraulic quick coupler - Battery disconnector - Forks - Original colour - Standard digging bucket Prsdpfx Abekhml Iopsa

Condition: ready for operation (used), Liebherr B 814C8000-01 AKAGS circuit board, serial number HO061, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Prsdpfx Asi Eby Dobpsa

Condition: used, axle configuration: 2 axles, first registration: 02/1984, total length: 11,900 mm, total width: 2,490 mm, suspension: air, tire size: 425/65 R 22.5, wheelbase: 10,750 mm, Year of construction: 1984, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tire size: 425/65 R 22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Tire tread depth left: 30%; Tire tread depth right: 30% Predpfx Aszliivebpoa Weights Unladen weight: 5,820 kg Payload: 26,180 kg GVW: 32,000 kg Functional Height of the loading platform: 45 cm Condition Damage: none Identification License plate: OF-06-59

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, lifting power: 3,500 kg/m, lifting height: 12,000 mm, Year of construction: 2007, operating hours: 6,041 h, Equipment: all wheel drive, cabin, pallet forks, Telescopic handler JLG 3512 Year of manufacture: 2007 According to the hour meter: 6,041 hours 11 meters 3.5 tons - Perkins engine! - Powershift transmission! - incl. forks - mechanical quick coupler - auxiliary circuit to the fork carriage - hydraulic outriggers - cab with heater - lighting system with turn signals - joystick control Podpjzk Alhjfx Abpsra - all-wheel drive - 3 steering modes - immediately ready for operation - good tires - incl. CE Selling price: €23,900.00 net Affordable delivery also possible! New bucket or new work platform available for an additional charge!

Condition: used, empty load weight: 8,814 kg, maximum load weight: 27,186 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2020, suspension: air, tire size: 385/65/22,5, front tire size: 385/65R22,5, Equipment: ABS, Schmitz deep-freeze semi-trailer | Schmitz refrigeration unit 8,972 hrs | Unladen weight: 8,914 kg | Payload: 27,185 kg | Pallet box | Schmitz axles with disc brakes | Second pallet box with spare wheel | Tyres: 385/65 R22.5 | Internal height: 2.60 m | Internal width: 2.49 m | Subject to input errors, mistakes and prior sale. Prjdpey Snz Tofx Abpja

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem low-loader with many extras: Equipment: 2 spring-loaded supports for 400mm high steel side walls Reinforced and certified superstructure according to EN 12642 XL, including cargo securing certificate 10 UVV lashing eyes in the existing hole pattern in the outer frame Additional wooden floor in a clamped design Tires 235/75R17.5 Podpjxcxmfjfx Abpera 4 BPW axles instead of GIGANT Platform extension by 870 mm to 6,270 mm Ramps in one piece with hot-dip galvanized grating in a non-slip design Lockable tool box with a payload of 45 kg Paint: Wheels silver Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized Axles/springs black Side walls RAL2011 traffic orange We would be happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of new equipment in stock and equipment available for demonstration. Please contact us! We rent out vehicles with and without drivers and machinery. A large number of used machines and equipment are constantly available. Subject to technical changes, errors, and prior sale.

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible Prodozlwm Aepfx Abpea * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: used, Year of construction: 1979, operating hours: 9,093 h, load capacity: 4,000 kg, lifting height: 3,400 mm, fuel type: diesel, gearing type: mechanical, Equipment: cabin, On behalf of our customer, we are selling an IRION DFQ4074/50S side loader. Load center at 70 cm distance. Permissible total weight: 11,000 kg Self-weight: 7,000 kg Prjdpfx Abeyxvdpspsa ----Errors and prior sale excepted. Contact via WhatsApp =

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Low-loader with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights and Ramps * Fifth wheel load increase from 12 t to 18 t incl. Kingpin mounted in: Second kingpin position 2", kingpin up to and incl. 5th wheel height 2,750 mm. Rear turning radius approx. 2,400 mm in clear width (a minimum clearance of 150 mm is recommended). Forward turning radius 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance to the towing vehicle must be ensured by the customer. * Extension parts for the wheel recesses at the front and bottom at the rear (205 mm deep). 6 pieces incl. insertion boards for wheel recesses at the rear. Board holder as receiving shafts according to code 09.112. Aluminum compressed air tank instead of steel. * Smartboard control box mounted on the trailer as an information tool with pressure sensors incl., exclusively for overall axle load display. Display option can be selected via the control box or in the truck via the EBS air suspension system (truck manufacturer-dependent). * ?SP-Combination Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the fifth wheel platform, W=2,480 x H=500 mm with a folding lid on top, side doors and sloping corners. Incl. aluminum side walls that can be folded down to the fifth wheel platform (500 mm high), aluminum rear wall plugged in (150 mm high), aluminum side panels painted inside and out in RAL 9006 white aluminum. Incl. rear uprights, foldable and detachable, galvanized (without topcoat). Incl. bolted front structure. Length of front cross member to 5th wheel height 3,935 mm. Forward turning radius, without spare wheel, at 5th wheel height 2,450 mm or 2,750 mm, approx. 1,750 mm or approx. 1,480 mm. Prsdpfoy R Ipujx Abpja * 2 container locking mechanisms recessed into the front cross member. * 3 receiving shafts under the fifth wheel platform for storing optional aluminum ramps or wooden planks for covering the wheel recesses. * Folding/extendable outrigger (galvanized) and wooden planks for widening incl. (not on the rear slope), plank holder on the fifth wheel platform (the track width of the load may be a maximum of 2,500 mm). * Second LED position light on the warning package at the front and rear (double lighting), only in combination with the warning package. * 2 LED reversing lights on the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V), max. 2 additional lights in total. * 7-pole socket on the rear, wired for overhang lighting with tail light (58 R) and ground. * Rubber mat on the loading ramp on the left and right (approx. 860 mm long) 190 07644 rubber strip, on the inner plank of the one-piece ramps. * Central lubrication system fully automatic with pump (24 V), grease tank and integrated trailer control, without connection to the ramps (in the case of steering: incl. connection of the distributor of the fifth wheel platform). Note: Only possible with towing vehicles with a 24 V lighting system! Intermediate sale and errors are expressly reserved! Sale exclusively subject to our general terms and conditions (AGB). Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not c

Condition: used, Year of construction: 2002, operating hours: 2,619 h, Bobcat 553 Cabin, bucket, pallet fork. Prsdpezng Tkefx Abpja

Condition: used, Year of construction: 2011, operating hours: 21,266 h, load capacity: 1,600 kg, lifting height: 3,215 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, * Yale GLP16VX * Max. lifting capacity: 1600 kg * Max. lift height: 3215 mm * Fully functional Pjdsy Ucqzspfx Abpsra