Used Loma 7000 for sale (782)

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Lsdpowzmcbsfx Aqvsrl FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Year of construction: 2022, condition: like new (used), Millipore Milli-Q ultrapure water system IQ 7000. Without cartridges. With MilliQ Q-Pod. Unused. Includes functional warranty. Lrodpfjwutuqjx Aqvjl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 11,851 h, controller model: Siemens Sinumerik 840 D, laser power: 3,600 W, sheet thickness steel (max.): 8 mm, working length: 6,500 mm, working width: 250 mm, Laser cutting machine with comprehensive equipment! The machine was last serviced by TRUMPF on 21.03.2025. Machine will remain powered on until 12.09. TECHNICAL DETAILS Working area: 6,500 x 250 mm Laser power: 3,600 W Accuracy: 0.1 mm Material Thicknesses Max. mild steel thickness: 8 mm Max. stainless steel thickness: 6 mm Max. aluminium thickness: 5 mm Performance Max. speed: 100/60/60 m/min Control: Siemens Sinumerik 840 D MACHINE DETAILS Laser hours: 11,851 h Operating hours: 47,778 h Dimensions & Weight Machine dimensions (L x W x H): 17,300 x 8,600 x 3,000 mm Weight: 19,000 kg EQUIPMENT Circumscribed circle diameter 200 mm 3 m unloading station with brush table Front unloading station NitroLine FocusLine SprintLine Laser power control Automatic shutdown function Work area lighting CO2 Laser TruFlow 3600 Laser logbook function Chiller unit Cutting head with 155 mm lens Teleservice RJ network connection and USB port USB interface CE marking Light barriers Extraction and compact dust collector Protective cabin with Makrolon panels Clamping jaws D 15-200 mm U-shaped guide rollers for unloading station D = 200 mm 6 m unloading station with brush table Circumscribed circle diameter 250 mm incl. clamping jaw set and guide rollers Lrsdpfx Aqjw Nqxhjvel SeamLine Tube Additional cutting head with 155 mm lens LoadMaster Tube 6 m with bundle support, 2 grippers Circumscribed circle diameter 250 mm LoadMaster Tube 6 m Low-scratch bundle support LoadMaster Tube 6 m Swiveling conveyor section LoadMaster Tube 6 m

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 593 h, load capacity: 1,400 kg, lifting height: 7,000 mm, free lift: 2,330 mm, load center: 500 mm, mast type: triplex, construction height: 2,950 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, Nice reach truck with 2019 battery. Rocla F14 TREV 7000 Lodjwxtxwepfx Aqvsrl Load capacity: 1400 kg. Lift height: 700 cm. Overall height: 295 cm. Free lift: 233 cm. Fork length: 115 cm. Side shift. Free lift. Fork tilting. Year: 2003 Operating hours according to hour meter: 593 Battery: Year 2019, 48V 620Ah The machine has hardly been used since the battery was replaced. Including charger. Can be loaded onto a truck free of charge. For transport in a standard Eurotrailer, the mast can be dismantled for a small additional fee.

Condition: good (used), Year of construction: 2018, functionality: fully functional, container length: 12 ft, We are selling this functional dryer due to a change in the heating concept at our biogas plant. Can be inspected on site. Lredpfsvg Nwaox Aqvsl Dismantling, transportation and reinstallation on request.

Condition: used, functionality: fully functional, machine/vehicle number: CT1453160, Year of construction: 2014, operating hours: 5,462 h, load capacity: 3,500 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, drive type: Diesel, Diesel forklift Chassis number: CT1453160 Mast type: Triplex Condition: Ready for operation and fully functional Ledpfxjwqh Uqe Aqvsrl Technical condition: Good Description: Caterpillar DP 35 NT, No.: R0581, Year of manufacture: 2014, Operating hours: 5,462, Lift height: 7000 mm, Fork positioner, side shift and telescopic forks. The machine is in good optical and good technical condition. Fast and straightforward transport possible by arrangement! This listing is for identification of the equipment only! A detailed description of the condition and possible features will be provided individually upon request! Subject to errors and prior sale, sale to businesses only. All sales of used equipment are made without any warranty or guarantee. If you have not found your forklift, please contact us. We have a wide range of other equipment available on site. 3rd valve, 4th valve,

Condition: like new (used), machine/vehicle number: ESD EG 64/32 HG, 7000 pieces plastic crate 600x400x320mm ESD EG 64/32 HG Auer or UTZ/RAKO Used goods, in very good condition, almost new, see photos Stickers may be present on the crates, but easy to remove! Content: 66 Liters Load capacity per crate: Lrsdpfx Aqewl Ditjvel Stacking capacity: Type: ESD EG 64/32 HG Outside length: 60 cm / inside length: 37 cm Outside width: 40 cm / inside width: 27 cm Outside height: 32 cm / inside height: 31.5 cm Stacking height (usable height inside): 30.3 cm ESD stacking containers 60x40x32cm Colour: Black Completely closed containers Dimensionally stable and robust Stackable on top of each other 40 pieces per pallet Negotiated price: € 11.00 net from stock Sale price: € 11.00 net from stock when purchasing at least 1 pallet (40 pieces) * Goods are in stock. * Transport and assembly possible on request. * Viewing always possible by appointment. * Further information on request. More than 1000 linear meters of pallet racking from various manufacturers in stock. Also 100,000 plastic containers in stock. Transport containers or for storage/grab containers. (Changes and errors in technical data, specifications and prices reserved, as well as prior sale! See our AV, all prices excl. VAT from stock).

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Lrsdjw R S S Espfx Aqvel

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Rollomatic 660XW, year of manufacture 2024, 6-axis CNC tool grinding machine: Lrsdpfjy S Uxrsx Aqvel Control system: FANUC 30iMB Grinding wheel changer: 6-position Tool diameter: Ø 0.1 – 12.7 mm 4 linear axes + 2 rotary axes Grinding spindle (max): 14 kW Spindle speed: 500 – 12,000 rpm Machine dimensions: 1840 × 1560 × 2250 mm Machine weight: approx. 2,500 kg

Year of construction: 2020, condition: new, functionality: fully functional, This is a combi steamer from the manufacturer Eloma, model Joker B6-23, manufactured in 11/2020. The unit is new, unused, and no longer in its original packaging. Minor signs of use may be present as the unit is no longer in its original packaging. The unit has been inspected in our in-house workshop, and the combi steamer is fully functional. The base cabinet shown in the picture is not included in the offer. You will receive an invoice with VAT shown. Ideal for outdoor kitchens, mobile kitchens, food trucks, catering services, and snack bars. With fixed water connection. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional - or your money back. Lrjdpfoyvqhkjx Aqvol Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 515 x 630 x 830 mm Power connection: V: 400 / kW: 5.90 / Hz: 50/60 Capacity: 6 x 2/3 GN Weight: approx. 70 kg Serial number: ELN146772 Year of manufacture: 11/2020 Model: EL0509423 Condition: New, unused, no longer in original packaging. Additional information: Classic operation with three encoders Digital display for time, cooking chamber and core temperature Multifunction button for individual and special cooking programs Integrated spray hose with automatic retraction Reading and recording of all HACCP-relevant data Optional fully automatic cleaning system autoclean Fresh steam system Preheating and rapid cooling Reversing fan wheel Timer function - start time preselection Integrated core temperature sensor Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 Ledjyga Utopfx Aqvsrl • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: good (used), 70 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 3 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 9.490,-- net ex stock Offer consists of: + 71 pcs. uprights or frames, 3 m galvanized +350 pcs. Shelves, 200 kg load/shelf, galvanized 5 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Lrjdpfx Aqsh Et Twevel Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), 30 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 2,1 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 3.250,-- net ex stock Offer consists of: + 31 pcs. uprights or frames, 2,1 m galvanized +120 pcs. Shelves, 200 kg load/shelf, galvanized 4 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Ljdpfjh Eulksx Aqvjrl Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Connected power: 56 kW EQUIPMENT Documentation/Manual Various tool holders and tools Lodpfjy Tv Aujx Aqvsrl

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t Lredpfeugnxdjx Aqvsl

Year of construction: 1994, condition: good (used), Manufacturer: Rollomatic Year of manufacture: 1994 Ljdpfxjwhznxs Aqvorl Type: CNC 24-F Machine number: 142 3 x 380 V, 50 Hz

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Lsdpfx Aowf Nn Ijqverl Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2001, table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel Ledpjtt Tb Defx Aqvjrl diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Year of construction: 1981, condition: used, machine/vehicle number: 152, We offer the Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 for sale. Configuration: Year: 1981 Jumbo paper unwinds, Ø 127 cm (50") Carbon unwinds, Ø 70 cm Cross glue unit NOT AVAILABLE! Programmable length gluing unit NOT AVAILABLE! Die-cutting cylinders in various sizes and cams for numbering machines. Snap out delivery with batcher and forward numbering capability (Bielomatik VWZ) – not visible in the photos. Ledpfsum T Ncox Aqvjrl Includes some spare parts. Machine is operational. Video available upon request. Price including disassembly: 9,000 EUR.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, Efficient pallet handling with a capacity for 15 pallets We now offer a robust and fully automatic pallet dispenser that optimizes your warehouse flow and eliminates manual lifting. This machine has only been used as a demonstration model—meaning it has never been operated in daily production, so it is in virtually new condition. The Greenline series is renowned for its reliability and ease of operation. Capacity: 15 EUR-pallets / 500 kg. Operation: 100% electric (230V) – no compressed air required. Function: Automatic stacking and destacking via a simple control panel. Lsdpjy N Uz Uofx Aqverl Advantages: Improved ergonomics, orderly warehouse, and significant time savings. Year of manufacture: 2013 Machine width: 1350 mm Height: 2,350 mm Depth: 1520 mm Capacity: 15 pallets Power: 230 V Available for immediate delivery. Shipping not included.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 700 mm, total width: 600 mm, total height: 1,220 mm, DGUV certified until: 05/2027, Loading oven Eloma Backmaster EB 30 T double station TOP convection oven tabletop unit for 3 baking trays with exhaust hood on top Stainless steel construction Lrsdpsxxgmrjfx Aqvol Only from us DGUV V3 inspected 2 x 230V connection Dimensions: 600 x 700 x 1220 mm (W x D x H) Used unit with warranty & spare parts service Quality from a professional workshop and service partner! Benefit from over 35 years of experience! Options: Baking trays Water filter Base frame Maintenance contract Delivery service Spare parts box for increased safety Service package Instruction & commissioning Many more ovens available in stock!

Condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Lrsdpfxstzmk Ne Aqvsl Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Belt Width 407mm Effective Belt Width 337mm

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Ljdpfoy R Ebnsx Aqvorl Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Hydraulically operated precision plunge grinding machines by Rollomatic. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm–6.35mm, shank diameter range: 1mm–6.35mm, total workpiece length range: 30mm–60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6,000 rpm, workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm, weight: approx. 600kg. Includes spare parts. Documentation available. Lrodpfx Aqjw Dfd Njvjl

Condition: not inspected (used), For sale due to lack of use: 2 Rollomatic grinding machines! CNC 24F3, CNC 24 FJ Lredpfxjyxwyle Aqvjl