Used Meta (Thyssen) Multipal S Palettenregalanlage Palettenregal Regal for sale (68,858)

Condition: used, Technical specifications for the wide-span racking: Racking system: Stow Type: Midirack Specifications for the installation: Number of rack rows: 01 unit Rack length: 2,810 mm Number of bays per rack row: 01 unit Number of levels incl. ground level: 05 units Scope of delivery includes: 02x End frames, used Material finish: Sendzimir galvanized Upright profile dim.: 55 x 45 x 1.5 mm incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled Knsdpfx Anov Hzfvjuec 2,000 mm high 700 mm deep 10x Beams, used Material color: yellow Z-profile: 74 x 30 mm Connector: 2 hook Clear span: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental dislodging 05x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: possibly coated (possibly two-part) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required beyond collection, additional costs will apply. These can be requested from us depending on the delivery location and scope.

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min Kjdsxaa R Hopfx Anuonc feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: good (used), Technical data for the pallet racking system: Racking system: Vogelsang Type: NS Technical data for the installation: Number of racking rows: 1 unit Length per racking row: 5,610 mm Number of bays per racking row: 02 units Number of levels plus base level: 03 units Technical data for the capacity: Pallet spaces per bay: 12 units Pallet spaces per racking row: 24 units Total pallet spaces: 24 units Included in the scope of delivery: 03x Pallet racking uprights, new Material color: Sendzimir galvanized Profile dimensions: P 70 x 80 x 2.50 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,200 mm Depth: 1,100 mm 12x Pallet racking beams, used Material color: orange Box profile: 110 x 50 mm Agraffe: 4 hooks Clear span: 2,700 mm Max. load per pair of beams 2,700 kg, with evenly distributed load 24x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 09x Bolt anchors, new Manufacturer: Hilti Knedpjxbgpxefx Anusc Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 06x Shims, new Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us, depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The SGA-2550AHD Surface Grinding Machine is a professional machine designed for precision grinding of flat surfaces in tool rooms, production facilities, and metalworking workshops. Equipped with a modern PLC control system, an electromagnetic chuck, and high-quality components, it delivers outstanding grinding accuracy, excellent repeatability, and reliable performance. Its rigid machine construction minimizes vibration, ensuring exceptional surface finish quality and long-term stability. The SGA-2550AHD is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision surface grinding. Main Features • PLC control system • Electromagnetic chuck • High grinding accuracy and repeatability • Heavy-duty machine construction • Professional coolant system • Simple operation and programming • Excellent surface finish • CE certified Precision Grinding The machine is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck, providing secure workpiece clamping and high machining precision for both single-piece and production work. PLC Control System The integrated PLC control system enables quick parameter adjustment, improves productivity, and ensures consistent machining quality. It is suitable for both individual jobs and serial production. Standard Equipment • Coolant tank • Electromagnetic chuck • Balancing arbor • Wheel flange • Wheel extractor • Leveling wedges and bolts • Tool box with service tools • Standard grinding wheel • Working lamp • Wheel dresser stand Included Optional Equipment • Full machine enclosure • Magnetic separator • Dust collection system • 2-axis digital readout (DRO) • Built-in electromagnetic chuck controller • Wheel balancing stand • Diamond dresser Technical Specifications • Model: SGA-2550AHD • Working table size: 250 × 520 mm • Electromagnetic chuck: 250 × 500 mm • Control system: PLC Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Tool steel grinding • Structural steel machining • Cast iron machining Kedpszd U Eyofx Anuenc • Precision engineering and component production Safety The machine is equipped with all required safety systems in accordance with European standards. The robust construction, protective guards, and CE certification ensure safe, reliable, and long-lasting operation. Transport & Delivery We offer professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is carefully loaded, securely protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying high-quality equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. Kjdpoz Hx Eaefx Anuenc The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Condition: excellent (used), Condition: Very good condition with relatively low usage. The machine was used in a correctional facility and was rarely operated. Metallkraft precision surface grinding machine FSM 2550 Robust surface grinding machine with CNC-controlled vertical feed and electromagnetic clamping plate for precision surface grinding operations. Grinding table clamping area (L x W): 500 x 250 mm Distance spindle / table: max. 500 mm Workpiece weight: max. 190 kg Feed rate X-axis: 5 - 25 m/min Spindle speed: 2,900 min-1 Grinding wheel (D/dxB): Ø 180 / 31.75 x 13 mm Connection voltage: 400V / 50Hz Motor power spindle: 1.5 kW Motor power hydraulic pump: 0.75 kW Footprint: 2,250 x 1,400 mm Dimensions (L x W x H): 2340 x 1500 x 1800 mm Weight (net): approx. 1,385 kg Knjdpfx Aez Hly Rjnuec

Condition: used, mileage: 22,767 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. Knsdpfx Aney N Enroujc CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Knjdpfx Aoy Sgdgenujc Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a column drill press made by Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! If interested, two identical machines are available! Shipping costs via freight carrier: approx. €190 Kjdpozvrt Sofx Anujnc Phone number: 01575 2236716 You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: excellent (used), Karmetal OSA 300 x 370 PLC Controlled Fully Automatic Bandsaw Balde Speeds Variable 25 – 90m/min (Invereter) Round Section 300mm Rectangle Section 280 x 370mm Sqaure Section 280mm For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #270341 Machine Serial Number: 21482 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Kodezuxugopfx Anusnc Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SLP Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: 14,640 mm Number of bays per rack row: 07 pcs. Number of levels incl. ground level: 02 pcs. Scope of Delivery Includes: 08x pallet rack uprights, used Material color: Sendzimir galvanized Profile dims: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (welded lattice framework) Height: 2,310 mm Depth: 1,100 mm Knedpoxy Ipqsfx Anujc 28x pallet rack beams, used Material color: grey INP profile: 100 x 50 mm End connector: 3-hook type Clear span: 2,000 mm 56x locking pins, used Material color: Sendzimir galvanized For securing the beams against unintentional lift-out 32x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Spec: carbon steel, galvanized Approved for: cracked concrete 16x leveling plates, used Spec: fully galvanized For leveling uprights installed on uneven floors 01x load sign with information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Polypal Type: Stockpal Technical Data for Configuration: Number of Rack Rows: 1 unit Length per Rack Row: 25,150 mm Number of Bays per Row: 9 units Number of Levels plus Ground Level: 5 units Volume Data: Pallet Positions per Bay: 18 units Number of Pallet Positions per Row: 162 units Total Number of Pallet Positions: 162 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Max. Weight per Pallet: 500 kg Scope of Delivery: 10x Pallet Rack Uprights, used Frame profile color: blue Beamwork color: sendzimir galvanized Type: SKMO 5220 P Profile dimensions: 85 x 63 x 2 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted beamwork) Height: 8,000 mm Depth: 1,100 mm 36x Pallet Rack Beams, used Color: RAL 5001 blue Box profile: 120 x 50 mm Design: header beam Beam type: SKVBN 09850NP22 Connector: 3 hook Clear span: 2,700 mm Max. load per beam pair: 1,500 kg (with evenly distributed load) 72x Safety Pins, used Color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting 40x Anchor Bolts, new Kedpfjx A Anmex Anuonc Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Material: plastic For leveling upright frames installed on uneven floors 1x Load Capacity Sign Specifying bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. If transport or shipment is requested beyond this, additional costs will apply, which can be individually quoted depending on destination and scope of delivery.

Condition: used, Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: 7 uprights, each 4,500mm x 1,100mm (blue) 7 used U-shaped collision guards 36 beams, each 2,700mm (orange) 60 picking beams, each 2,700mm (orange) 30 shelf panels, 270cm x 110cm x 22mm 16.90m wire mesh rear wall, 300cm high → 51.00m² This results in a racking row consisting of 6 bays, each with 8 levels + floor storage space = a total of 54 pallet spaces (800kg per pallet) 30 picking levels, 270cm x 110cm, with 500kg capacity per position One walkthrough bay Approximately 280 uprights and 2,000 beams are available in total for this system. Please contact us for more information. Manufacturer: Mecalux Condition: used, good condition Height: 4,500 mm Length: approx. 16.90 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Maximum load per level: 2,400 kg Maximum bay load: 7,200 kg Pallet spaces: 54 Accessories available, such as: - Floor anchors - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh decking - Rear mesh panels - Depth profiles Knodpfxsyg Iykj Anuoc - Partition railings ...and much more. Please contact us with your requirements!

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm Knjdjyk Dp Nspfx Anuoc - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: good (used), Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pc. Knsdpswq Hv Tofx Anuec Length per rack row: approx. 35,950 mm Number of bays per rack row: 09 pcs. at 3,900 mm each Number of levels plus base level: 02 pcs. Scope of delivery includes: 10x pallet rack frames, used Material colour: RAL 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. horizontal and diagonal braces, base plates The frames are pre-assembled (bolted truss) 3,300 mm high 800 mm deep 36x pallet rack beams, used Material colour: RAL 2004 orange Box section profile: 140 x 50 mm Beam type: PNB0444 Bracket: 4 HK (hooks) Clear width: 3,900 mm Max. load per pair of beams 2,300 kg with uniformly distributed load 72x safety pins, used Material colour: Sendzimir galvanized For securing the longitudinal beams against accidental lifting out 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Design: fully galvanized For leveling the rack frames when installed on uneven floor 01x load capacity sign with specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location or scope.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP Knodpfoxaakasx Anuec - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm Knodpfxjxaap Ao Anusc bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, loading space length: 9,800 mm, Year of construction: 2025, Equipment: ABS, * Extendable loading platform by 90 cm * Knorr air pressure braking system Knsdpfx Anjyvnwijusc * 3 axles with drum brakes * Front and rear grilles ----* Tire dimension: * Technical total weight: 16000 kg * Tare weight: 3540 kg * Overall length: ----Vehicle number: 11937----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----Your VTS Team

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Ksdpfeyvr U Eox Anuonc Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 39.90 meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Kjdoyt E Ekjpfx Anusnc Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, bore capacity in steel St 60 25 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 132/724 mm feed von Hand 0 stufenlos Spindle Speed 225-4300 U/min. engine 1,0/1,6 kW voltage 400 V Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Kjdpfx Aeyvvpgenuenc Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: new, 40 mm M 24 Knjdpfx Aneyvvq Dsusc M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Knedpfomkixwex Anuec Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2018, condition: new, max. dia. of grinding wheel 175 mm boring diameter 32 mm Kodslp U Ucopfx Anusnc max. width of grinding wheel 25 mm

Condition: good (used), Column drill press Manufacturer: ALZMETALL, Type: AB 4 SJ (approx. year of manufacture: 1970) with coolant system, continuously variable speed control, with 2 gear stages. Max. drilling capacity in steel: 40 mm Spindle mount: MK 4 Spindle speeds: 80 - 720 rpm Max. spindle stroke: 150 mm Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Knsdpfxolq D Ako Anusc Machine is ready for use.