Used Micoda 60 T X 1250 for sale (1,03,667)

Condition: as good as new (ex-display), Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Podpfx Ansvwflnotept

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,915 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-Wheel Forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Technical condition: Very good Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery year: 2018 Battery condition: 60 - 80% Description: Price includes new UVV safety inspection (we use original Still spare parts), rear counterweight repainted, battery from 2018 overhauled and tested with Kappa Test result 76%, matching charger with connector included. We are happy to arrange cost-effective transport for you. Lease-purchase possible!!! Side shifter, fork positioner, Pedpfx Anov Efghjtjpt 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate, Multi-lever control.

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Ppjdpfehqt Hpox Antjt Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,628 h, load capacity: 6,000 kg, lifting height: 3,850 mm, load center: 500 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,400 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Diesel, Diesel forklift Load center: 500 Fork width: 1600 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Maintained and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shift, fork positioner, Ppjdjy Nt T Njpfx Antot 3rd valve, 4th valve, rear work light, front work light, half cab, heater, full cab, safety light, rotating beacon, air conditioning

Condition: used, mileage: 3,60,000 km, power: 338 kW (459.55 HP), first registration: 02/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: beige, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), VOLVO FMX 460 8X4 FLATBED ? REAR CRANE HIAB RADIO REMOTE ? LEAF-LEAF SUSPENSION ? 10 M CRANE ? ----VEHICLE HISTORY ? VEHICLE HAS FRENCH DOCUMENTS ? VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT ? FLATBED ? REAR CRANE ? 8X4 DRIVE ? AUTOMATIC TRANSMISSION ? ENGINE BRAKE ? CRUISE CONTROL ? DIFFERENTIAL LOCK ? REVERSING CAMERA ? AIR CONDITIONING ? RADIO REMOTE CONTROL ? LEAF SPRING SUSPENSION ? TOOLBOX ? 1 X FUEL TANK CRANE ? HIAB XS 211 HIDUO ? RADIO REMOTE CONTROL ? MAX. LIFTING CAPACITY: 7.1 TONNES AT 2.5 M ? TOTAL REACH 10 M FURTHER DETAILS ? WHEELBASE: 5.70 M ? TYRE SIZE: 12R 22.5 ? TYRES SAME ON ALL 4 AXLES ? TYRES IN GOOD CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR OPERATION ? GROSS VEHICLE WEIGHT: 32,000 KG ? CURB WEIGHT: 17,428 KG ? PAYLOAD: 14,572 KG ----EXPORT / NOTICE EXPORT SALES ONLY WITH DEPOSIT (MIN. 500¤ – 2,000¤) EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ – 2,000¤ EXPORT DECLARATION EXW POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER STATUS). VEHICLE RESERVATIONS ONLY IN WRITING. ORAL AGREEMENTS NON-BINDING. SUBJECT TO CHANGE, ERRORS, AND PRIOR SALE. LEGAL NOTICE Pjdpfjy I Htmsx Antspt THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER UNDER §145 BGB. IT SERVES SOLELY AS A BASIS FOR INITIATING CONTRACTS. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY UNDER OUR GENERAL TERMS AND CONDITIONS.

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, dealership parking, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO, automatic transmission, differential lock, leaf suspension, air and light connections for trailer hitch, aluminum tank, hydraulic cross locking, green environmental badge. Wheelbase: 3800 mm. Body: 20t Hyva 20-55-S or 20-57-S hooklift system for containers up to max. 6.8m. 9t front axle! Frame length approx. 6200 mm! Frame height approx. 1170 mm! VIN: ZCFF62PP60C526745. On request and at extra cost, also available with a different hooklift system! Day registration on 08.12.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Psdpfxew Rrh To Antept

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, company registered, 1x comfort seat, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO (power take-off), automatic transmission, differential lock, leaf suspension, air and light connections for trailer coupling, aluminum fuel tank, green environmental badge. Wheelbase: 3800 mm, 9t front axle! Frame length approx. 6200 mm! Frame height approx. 1170 mm! VIN: ZCFF62PP60C526745. Day registration on 08.12.2025! Accessory details provided without guarantee; subject to change, prior sale and errors excepted! Ppjdpfx Asw Rriqentet

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Ppodpfx Ajyrb Swentot

Condition: good (used), mileage: 2,53,101 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,250 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, = Additional options and accessories = - Air suspension - Aluminum fuel tank - PTO - Remote central locking - Sleeping cabin - Speed limiter - Sun visor - Tipping hydraulics - Toolbox = More information = Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Number of cylinders: 6 Engine capacity: 11.120 cc Empty weight: 8.113 kg Carrying capacity: 12.387 kg GVW: 20.500 kg Registration number: 56-BLD-8 = Dealer information = Psdpsydbyxjfx Antspt We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Podpfx Ajytpy Sjntjpt Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Podsytcmrspfx Antjpt Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm Psdpfx Ansiwa Iastspt total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Ppodpov Ab Dqjfx Antjt Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,385 h, load capacity: 2,500 kg, lifting height: 4,870 mm, fuel type: electric, mast type: triplex, construction height: 2,310 mm, gearing type: automatic, battery capacity: 620 Ah, battery voltage: 80 V, tire condition: 100 %, Equipment: UVV, adjustable boom, cabin, lighting, pallet forks, sideshift, trailer coupling, RX 60 - 25 BATTERY YEAR 2023 Fork positioner, triplex mast, full free lift, side shifter, Work lights front and rear, Joystick control New tires front and rear Weather protection cabin with heating Ppsdpfx Anoyfmmgotst Charger Excellent condition Freshly serviced

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,060 h, load capacity: 3,500 kg, lifting height: 4,960 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, gearing type: automatic, battery voltage: 80 V, tire condition: 100 %, Equipment: UVV, cabin, lighting, sideshift, trailer coupling, RX 60 - 35 L TRIPLEX MAST, FULL FREE LIFT, SIDESHIFT ROAD-LEGAL LIGHTING, WORK LIGHTS FRONT AND REAR BLUE SPOT FRONT AND REAR MINI JOYSTICK CONTROL WEATHER PROTECTION CABIN BATTERY CHARGER TYRES FRONT AND REAR NEW ON DELIVERY EXCELLENT CONDITION RECENTLY SERVICED Ppedpjyfmd Sefx Antjt

Condition: used, mileage: 10,97,470 km, power: 345 kW (469.07 HP), first registration: 12/2018, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: other, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: Renault - Type/Model: T 460 Comfort 6x2 - First registration: 03/12/2018 - Mileage: 1,097,470 km - Number of axles: 3 - Emission class: Euro 6 - Cab: L - Permanent brake: retarder - Suspension: air - Lift axle - Steering axle - Brakes: disc - Length: 8,650 mm - Width: 2,550 mm - Height: 3,180 mm - Bodybuilder: Schwarte - Tank material: stainless steel - Total tank volume: 15,000 L - Tank compartments: 3 - Insulated - CIP cleaning Ppedpfx Aey Iginentot

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,737 h, load capacity: 2,500 kg, lifting height: 4,630 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 Mast type: triplex Condition: Ready for operation and fully functional Technical condition: very good Tyre type front: superelastic Tyre type rear: superelastic Battery voltage: 80V Psdpsy Eupdsfx Antopt Battery capacity: 620Ah Battery year: 2022 Battery condition: 80 - 100% Description: Sideshift, Fork extensions 1400 mm, battery year 2022 – with 80% performance!!! 3rd valve, rear working lights, front working lights, half cab, full free lift,

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Podpfxoyn A Rtj Antopt Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/24 ISO pallets. ROTOS SCB running gear (disc brakes).

Condition: good (used), mileage: 16,714 km, first registration: 11/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,370 mm, total width: 1,930 mm, total height: 2,050 mm, loading space length: 2,700 mm, loading space width: 1,650 mm, loading space height: 1,310 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Halogen headlamp - None - Alloy wheels - Manual - Radio/Cassette - Rear view camera - Lane departure warning system - Fabric - Blind spot sensor - Partition wall = Notes = Configuration: 4x2, Payload: 987 kg, Unladen weight: 2213 kg, Gross weight: 3200 kg, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Colour: White, Rear view camera, Lighting type: Halogen headlamp, Lane departure warning, Air conditioning, Heated seats, Bluetooth, Blind spot sensor, Fuel: electric, Transmission: Automatic, Power steering, ABS, ASR (traction control), Starter battery, Body type: extra long, Side panels covered, Roof rack: None, Central locking, Number of seats: 2, Seating arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, XL Vebabox AC automatic, Tire type: Winter tires = Additional Information = Axle configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 6 mm Weights Unladen weight: 2,213 kg Payload: 987 kg GVW: 3,200 kg Functional Loading platform height: 55 cm Maintenance APK (technical inspection): valid until 11/2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €593 per month (commercial vehicle, 72 months); Please inquire for further information and conditions Pjdpfx Anoyzmh Retopt Identification Registration number: V-12-JBG

Condition: used, mileage: 7,19,000 km, first registration: 01/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, Volvo FH 460 SZM Globetrotter Standard ! 3 units available ! • EURO 6 • Leaf / Air suspension • I-Shift automatic transmission • VEB-Plus • Differential lock • Hill start assist • Lane departure warning system • Emergency braking assistant • Adaptive cruise control Pjdpsy Hgn Ijfx Antopt • Automatic climate control • Parking cooler • Parking heater • Rear-view camera • 1 bunk / bed • Overbed cabinet • Spoiler • Refrigerator • CD radio • Bluetooth • Aux • USB • Satnav • Phone with hands-free system • Central locking • 1 x 700 litre aluminium tank • Wheelbase: 3,700 mm • GVW: 18,000 kg (technically possible: 20,500 kg) • Unladen weight: 7,560 kg • Wheelbase: 3,700 mm • Disc brakes • Tyres: 315/70 R22.5 • Tyre tread depth: 10/10/9/9/9/9 mm - TÜV / Inspection: 02 /2027 - German vehicle! Subject to errors and prior sale!

Condition: used, functionality: fully functional, load capacity: 500 kg, total length: 780 mm, total width: 600 mm, total height: 1,900 mm, We are offering used roll containers for sale. TECHNICAL DATA - Manufacturer: Wanzl - Height: 1,900 mm - Width: 780 mm - Depth: 600 mm Podpfx Anoy Epqajtopt - 2 swivel castors and 2 fixed castors - Nestable - Lockable - Assembled - Condition: used PRICE - €150.00 net per unit - €178.50 gross per unit incl. VAT Available quantity: 20 units Tiered pricing per unit - 1 - 5 units: €150.00 net - 6 - 10 units: €142.50 net - from 11 units: €135.00 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The exact costs depend on the delivery location and scope of the shipment and can be provided upon request. PROJECT PLANNING Our sales team will be pleased to prepare a non-binding, customised offer according to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The quoted price refers to the unit price/net price, or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used items from various manufacturers/brands at favorable conditions. For any questions, please do not hesitate to contact us. Connect Four – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, pressure: 320bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 350column throat depth: 450weight approx.: 23.1004 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Ppjdped Ehh Tefx Antet

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. Pedpfx Aorftxfjntjpt The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: excellent (used), mileage: 45,530 km, power: 338 kW (459.55 HP), first registration: 01/2024, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,410 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, total length: 9,280 mm, Year of construction: 2024, Equipment: crane, Iveco X-Way 460 First registration: 04.01.2024 Mileage: 45,530 km Emission standard: 6E Automatic transmission MEC container hook lift system Hook distance – rollers (retracted): 3.95 m Hook distance – rollers (extended): 5.15 m Hydraulically extendable bumper: +85 cm Comma 208 HP loading crane Year of manufacture: 2022 4,570 kg at 4.15 m 3,125 kg at 6.05 m 2,365 kg at 8.0 m 5th and 6th gear Tyres: 50–75% tread depth remaining Cevoman bv. Lenskensdijk 5 2200 Herentals Psdpfsy Ibyujx Antept Belgium

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot Pedjy A Hq Ispfx Antopt - (Only with Siemens control) Special Equipment / Options - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.