Used Mitutoyo Ph3500 Profile Projector for sale (5,405)

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Lasdeu Sqmdopfx Akfea

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 705 mm, measuring range Z-axis: 405 mm, table width: 638 mm, table length: 1,160 mm, table load: 180 kg, TECHNICAL DETAILS Measuring range X: 505 mm Measuring range Y: 705 mm Measuring range Z: 405 mm Guide method: Air bearings on each axis Drive speed CNC mode: 8 to 300 mm/s Drive speed Joystick mode: 0 to 80 mm/s Measuring system: Linear encoder Resolution: 0.001 mm Measuring table material: Granite Table size (workpiece clamping surface): 638 x 1160 mm Workpiece clamping: M8 x 1.25 Maximum workpiece height: 545 mm Maximum workpiece mass: 180 kg MACHINE DETAILS Machine height: 2,185 mm Machine width: 1,082 mm Machine depth: 1,122 mm Machine weight (incl. stand and control): 440 / 515 kg Power supply (installation): Single phase 100 to 240 VAC, 50/60 Hz, D-type grounding Power supply capacity: 700 VA Air pressure: 0.4 MPa Lasdpfx Asw T Thyjkfea EQUIPMENT - Air consumption: 50 l/min (under standard conditions) - Temperature and floor unevenness must comply with the conditions specified in "1.2.1 Environmental Conditions".

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight Ljdpfsx E U U Hjx Akfjaa - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: good (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that is inspected, tested, and guaranteed to be ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex V776 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 700 x 700 x 600 mm Controller: UC-480 Operating manual: Available Hardware and software configuration: PC/CPU: Demonstration/brand-new device Monitor: Demonstration device Printer: Demonstration device Software: Current Mitutoyo Software MCosmos-1 V4.3 Geopak-WIN Accessories: Lajdpfxjxqnubj Akfoa Probe head mount: Renishaw PH10MQ Probe: Renishaw TP200 Additional accessories: Ceramic calibration sphere Various probe styli and extensions Renishaw change rack 1 x SCR-200 We are happy to provide you with personalized advice as specialists to find the right machine for your measurement needs. Worldwide delivery available upon request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation). Software - MCOSMOS 3 CNC V4 Equipment: PH10MQ probe head (incl. FCR25 quick-change rack). SP25M scanning probe system with 5-piece probe module set. MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box). CAT1000PS V4 (CAD comparison and evaluation). Software upgrade MCOSMOS-1 from V2 to V4. GEO-EDM add-on module for eroded parts. Part-program generator and GEO-EDM assistant. Lasdpfx Akox H Nn Rofoa

Condition: good (used), Mitutoyo Height Master 515-318 Height Micrometer Height Master 515-318 Height Micrometer Measuring range 10-310 mm Reading marks in 0.001 mm increments Quantity: 1 piece For calibrating and adjusting height gauges and marking devices, for example. Mitutoyo supplies a double-block height micrometer with a counter that makes reading faster, easier, and more accurate. The Height Master's gauge block is arranged in two rows, one on the left and one on the right, each with a height interval of 20 mm. Lsdpfx Akju Egyyofeaa Manufacturer price: €4,170 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), functionality: fully functional, Used 3D coordinate measuring machine Mitutoyo Crysta Apex C7106 - Precise scanning technology for large workpieces On our marketplace we offer the used 3D coordinate measuring machine Mitutoyo Crysta Apex C7106, equipped with a scanning probe system and the latest MCOSMOS-3 V5 software. This machine has been tested and calibrated by our technicians to ensure that it delivers precise measurements, even on complex workpieces. The Crysta Apex C7106 offers a generous measuring range and enables high-precision 3D measurements, ideal for quality control on the shop floor. Technical data: Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Ledpjuzu Ecsfx Akfoaa Accuracy: ±1.7 + 0.3L/100 µm Drive: CNC-controlled for fully automated measurements Touch probe: Scanning touch probe, ideal for precise surface inspections and measurements of complex geometries Software: Mitutoyo MCOSMOS-3 V5, the latest version of the powerful measuring software that supports comprehensive 3D inspections and CAD integration Advantages: Precise scanning touch probe: this machine is equipped with a scanning touch probe capable of continuously capturing measurement points across the surface of the workpiece. This makes it ideal for detailed inspections and the precise measurement of free-form surfaces and complex geometries. Latest software: With the latest version of the MCOSMOS-3 V5 software, you can handle complex 3D measurement tasks, import CAD data and create measurement programs that significantly increase the efficiency of your quality control. Large measuring range: With a measuring range of 700 mm x 1000 mm x 600 mm, the C7106 is suitable for medium-sized to large workpieces, making it the perfect solution for industrial inspection processes. Reliability through testing: This used machine has been thoroughly tested and calibrated to ensure it continues to deliver highly accurate measurement results. Despite its age, it is ready for use in production and offers a cost-effective solution for companies. Automation: The CNC control enables fully automated measurements, providing repeatable and consistent results, significantly improving efficiency on the shop floor. The Mitutoyo Crysta Apex C7106 offers an ideal combination of state-of-the-art scanning technology and robust software, making it an outstanding choice for precise inspection tasks on the shop floor. This used machine is an economical option for companies that require reliable and precise measurement technology.

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 7106 - Precise and reliable measurements On our marketplace you will find the used 3D coordinate measuring machine Mitutoyo Euro C Apex 7106, which still offers outstanding precision despite its older year of manufacture thanks to regular maintenance and comprehensive testing by our experts. This machine has been thoroughly tested to ensure that it still delivers reliable measurements. Ideal for larger workpieces, the Euro C Apex 7106 offers both high measurement accuracy and a stable granite construction that ensures repeatable results. It is an excellent solution for companies looking for a cost-effective, used measuring machine without compromising on measurement quality. Technical data: Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Lodpfjuyiuijx Akfeaa Accuracy: ±2.9 + 0.3 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Tested quality: This machine has been extensively tested and calibrated in our workshop to ensure its reliability and precision. It is ready for immediate use in your production. Large measuring range: With a measuring range of 700 mm x 1000 mm x 600 mm, the Euro C Apex 7106 is ideal for inspecting larger workpieces on the shop floor. Stability and precision: Thanks to the granite base and robust construction, this machine guarantees precise and repeatable measurements even with intensive use. Automated efficiency: The CNC control and Renishaw TP200 system enable fully automated and repeatable measurement processes, increasing throughput on the shop floor. This used Mitutoyo Euro C Apex 7106 has been inspected, tested and prepared for the production environment by our experts. Despite its age, it remains a cost-effective and accurate solution for companies that need reliable measurement technology.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Mitutoyo Crysta Apex S574 – Precision Coordinate Measuring Machine with PH10M & SP25M Year of manufacture: 2012 Condition: Very good, fully functional This Mitutoyo Crysta Apex S574 impresses with first-class precision, stability, and reliability. The machine has been regularly serviced, is in excellent condition, and is immediately ready for use—ideal for companies that value precise measurement results and durable technology. Technical data: • Measuring range: X = 500 mm | Y = 700 mm | Z = 400 mm • Probe system: Renishaw PH10M motorized indexing head • Scanning probe: Renishaw SP25M • Year of manufacture: 2012 • Condition: very good, tested and fully functional • Software: MCosmos V3 Laodpfx Ajxrc E Dekfja Your benefits at a glance: • Highest accuracy – ideal for demanding form and dimensional inspections • Flexible probing thanks to motorized PH10M head • Reliable scanning measurements with the SP25M system • Well-maintained used machine – technically inspected and immediately available Optional: • Delivery, installation, and training by experienced metrologists

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 9166 - precision and durability We offer a used Mitutoyo Euro C Apex 9166 3D coordinate measuring machine on our marketplace, which was developed for large and complex workpieces. Despite its older age, this machine has been extensively tested and calibrated by our technicians to ensure that it continues to deliver accurate and reliable measurements. The Euro C Apex 9166 offers a generous measuring range and robust construction, ideal for companies looking for a tried and tested solution. Technical data: Measuring range: X = 900 mm, Y = 1600 mm, Z = 600 mm Accuracy: ±2.9 + 0.4 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Touch probe: Renishaw TP200 with automatic probe change Software: Mitutoyo MCOSMOS Advantages: Tested and reliable performance: This used Mitutoyo Euro C Apex 9166 has been fully tested and calibrated by our experts. Despite the older year of manufacture, the machine guarantees precise and repeatable measurement results. Large measuring range: With a measuring range of 900 mm x 1600 mm x 600 mm, this machine is ideal for inspecting large workpieces. Robust construction: The granite construction of the base ensures stability and enables precise measurements even during intensive use. Efficient automation: The CNC control and Renishaw TP200 touch probe enable fully automated and repeatable inspection, increasing production efficiency. Cost-effective investment: This machine offers an economical solution for companies looking for a proven and reliable 3D coordinate measuring machine. This used Mitutoyo Euro C Apex 9166 is ideal for companies that need a reliable and powerful 3D coordinate measuring machine for large workpieces. Despite its age, it remains a first-class choice for precise and automated measurements as it has been thoroughly tested by our metrology specialists Ljdpfxjuyiv Tj Akfsaa

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Lajdjuyiu Nepfx Akfea Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: used, This listing is for a Mitutoyo DP-3 Calculator Laedexzhv Hjpfx Akfsa

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Manufacturer: Mitutoyo Ljdpfxow Hqrws Akfoaa Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Lajdpfx Aexv A Rujkfoa Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release Lasdsxv A Rzspfx Akfea This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany Laedpfjx Sylqex Akfoa – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Lasdpfx Aksyyyv Esfsa Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: excellent (used), Catalogue number 7248 Lsdpfx Akjyg Iprjfjaa TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling Laedpoyy Nd Eofx Akfoa – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. Lsdpfjhpuhtsx Akfjaa "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder Ledpsy Any Rofx Akfeaa 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Laedpfxjrt Hurj Akfsa

Condition: ready for operation (used), ASYST CNC Profile Dressing Device Model: APNC 400 Year of manufacture: 2003 Laodpfx Akoy Edc Tjfoa Device is operational; offered as a spare or for parts harvesting.

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: VYDONA WOOD EU78-92 VYDONA Wood-Aluminium 92mm Hole 50mm. Ledpfx Aoy D E S Hokfoaa All complete. Very good condition. Available as a set. Possible to buy also separately.

Condition: good (used), functionality: fully functional, Year of construction: 2016, TauRing ring and profile bending machine DS 60 with accessories Laedpfx Asy Dh Drjkfoa