Used Mueller Apparatebau Muller for sale (1,150)

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer Hfsdpfx Asyw Hwdjcbeg On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025. Hfjdpfxst N Ante Acbeg

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Hfedjyr Hk Sepfx Acbsg Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Year: 2025 Description: - Compensating stacker - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Hsdpfx Asyr E Dkjcbefg Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2019, Equipment: ABS, * Müller Mitteltal 3-axle trailer for demountable containers * Model TM 2 24 * For two demountable containers from 7 to 10 m³ * Load securing with only two chains per container * Twin tyres 265/70 R19.5 * Air suspension * BPW axles * Turntable drawbar pneumatically lowerable with pneumatic release * 8 UVV lashing rings (5t) for attaching tensioning elements * 8 adjustable container stops for lateral centering of containers * EBS * Technically permissible gross weight 27,000 kg Hodpfx Asyx R Enjcbjfg

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approx. 1980 Rack with 20 module slots – 12 modules installed Hfedjflrtxspfx Acbeg Installed modules: 1 pc 0.651.406-19.3 UNI Universal Interface 1 pc 0.650.847-56.1 O32 Output Card 2 pcs 0.651.708-57.3 I32 Input Card 1 pc 0.652.138-36.1 APC 1 pc 0.651.928-25.3 LAB Axis Controller 1 pc 0.651.400-22.3 1 pc 0.860.204-59.1 B32 1 pc 0.652.128-35.0 RE4 1 pc 0.651.269-26.0 ITY Serial Interface 1 pc 0.651.974-23.2 ABS Termination Board 1 pc 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Hedpfx Acoi A A Tbebsfg Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine space requirement L x W x H 900 x 600 x 1700 mm Hodpfx Ajik Srwscbofg weight 530 kg very good condition

Condition: good (used), functionality: fully functional, pressing force: 1,500 t, stroke length: 1,320 mm, table width: 2,440 mm, table length: 4,572 mm, clearance between the columns: 4,800 mm, die cushion stroke: 360 mm, Equipment: documentation/manual, Manufacturer Muller Hjdpfxoq Hdz Uj Acbofg Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: ready for operation (used), Built in 1995/2000 Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 400 x 290 mm Size trimmed with lap max 470 x 300 mm min 148 x 75 mm Speed max 12.000 c/h Equipment gathering chain & feeder • 4 station gathering track & chain • 3 feeder 279 • 1 folder feeder 1529 stitching unit Hfedsd Hivmepfx Acbeg • stitching unit 335 • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 trimmer • trimmer 360 • knives • 2 sets of knives

Year of construction: 2005, condition: ready for operation (used), Built in 2005 Fall height 400 mm Size max 450 x 340 mm min 240 x 170 mm Mechanical speed 80.000 c/h Equipment Hedpfx Aod Hr N Dscbjfg • outfeed to the right • belt delivery

Year of construction: 2005, condition: ready for operation (used), Built in 2005 Fall height 400 mm Size max 450 x 340 mm Hfedjd Hr Rnspfx Acbog min 240 x 170 mm Mechanical speed 80.000 c/h Equipment • outfeed to the right • belt delivery

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: Hjdpsd R Sansfx Acbofg max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives • 2 sets of knives

Year of construction: 1997, condition: used, Built in 1997 Hedpfx Acediqh Nsbjfg Size max 450 x 340 mm min 148 x 105 mm Speed max 80.000 c/h

Year of construction: 2004, condition: good (used), Built in 2004 Size: max 510 x 320 x 60 mm min 200 x 72 x 3 mm Equipment Hodpfx Acod Sppaobofg • turnover belt

Year of construction: 1996, condition: good (used), Built in: 1996 Size: max 320 x 510 x 4 mm min 80 x 120 mm Number of stitches: Standard 13 Stitching length: 16,5 mm Mechanical speed: 12.000 c/h Hjdsd Sqclepfx Acbsfg

Year of construction: 1995, condition: good (used), Built in 1995 Size: max 480 x 320 mm Size untrimmed with lap: max 480 x 320 mm Size untrimmed without lap: max 400 x 290 mm Size trimmed with lap: max 470 x 300 mm min 148 x 75 mm Speed: max 12.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: 6 station gathering track & chain 5 feeder 306 1 folder feeder 1528 stitching unit: stitching unit 335 Hfodpfx Acsgmr Nzebjg wire unwind device thickness control/ plus-minus 2 stitching heads HK 75 trimmer: trimmer 360 knives 2 sets of knives

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Hsdpjd Hl N Rsfx Acbjfg Size max 480 x 320 mm min 148 x 105 mm Product thickness max 20 mm min 2 mm Speed max 20.000 c/h

Condition: ready for operation (used), Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment • main product feeder • opening station with sucker and sword • 7 insert feeders Hjdjd Hxrgspfx Acbjfg • belt delivery • compensating stacker

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 440 x 290 mm Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm min 148 x 75 mm Speed max 10.000 c/h Equipment stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 Hfsdpfed Ir Izox Acbjg knives • 2 sets of knives

Condition: ready for operation (used), Size main product max 320 x 400 mm min 148 x 210 mm Hfjdsdyhcxepfx Acbog Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h Working height feeder 1.100 mm Equipment • main product feeder • sword opening • 4 insert feeders • belt delivery

Condition: ready for operation (used), Müller Martini card gluer 315 for 3680 Hfedpodykhhjfx Acbog

Year of construction: 1996, condition: ready for operation (used), Müller Martini card gluer for 3681 Hsdpfxodykhne Acbsfg

Year of construction: 1997, condition: used, Size max 480 x 320 mm Speed max 18.000 c/h Equipment 1 feeder 3681 Hjdpfx Acsc H Sm Hsbsfg

Year of construction: 1999, condition: ready for operation (used), Built in 1999 Size max 480 x 320 mm min 148 x 105 mm Product thickness max 20 mm min 2 mm Hodpfsd Ir N Uox Acbefg Speed max 20.000 c/h