Used Neff Double-Column Presse for sale (24,669)

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Bjdpfx Asyq Tdiomnjli Strokes per minute: 8-24

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Bjdpfx Amjgta Rconeli Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: used, Year of construction: 1964, machine/vehicle number: 64 / 39.9037 / 2, functionality: fully functional, pressing force: 1,200 t, stroke length: 600 mm, table width: 4,500 mm, table length: 2,700 mm, distance table to ram: 1,600 mm, clearance between the columns: 5,200 mm, overall weight: 4,00,000 kg, Equipment: documentation/manual, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 600 mm Strokes: approx. 9 strokes/min Shut height: approx. 1,600 mm Drawing device: Bljdpfx Amsy An H Ronoi Blankholder (drawing cushion) force: approx. 225 t Drawing cushion stroke: approx. 200 mm Pneumatic ejector in ram: Force: approx. 95 t Stroke: approx. 150 mm Heavy-duty mechanical eccentric drawing press in robust double-column design by Schuler, engineered for continuous industrial operation in the automotive sector. The machine features a pressing force of 1,200 t and a fixed ram stroke of 600 mm, with an additional ram adjustment of 600 mm. The stroke rate is approx. 9 strokes per minute. The shut height is around 1,600 mm, enabling the use of large-format dies and components. Particularly noteworthy is the large working area with a table size of approx. 4,500 mm, as well as a retractable/movable press table that significantly facilitates setup and die change, making the machine optimally suited for handling heavy tooling. The integrated drawing device (drawing cushion) provides a holding force of approx. 225 t with a stroke of approx. 200 mm, enabling demanding drawing and forming processes, especially common in bodywork manufacturing. In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated parts removal processes. The press has not been operated in continuous production at its current location since the 1990s and has only been used for testing purposes.

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm Bsdpfsvxwhwex Amnsli ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Bledpfx Amsguvtlsnei Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation Bedpfxodzqpte Amnsli - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) Bjdow A Amropfx Amneli - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, die cushion stroke: 200 mm, The machine still needs to be built. Requirements can be considered where possible. Ejector in ram – approx. 10 t. Table draw cushion approx. 800 x 850 mm. Weight approx. 18 t. Stroke approx. 600 mm. Blsdpfx Aevga H Eomnei

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Bodpfx Aexlh Rfjmnoli Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Bjdpfsx R U Idox Amneli Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Bjdpfxsv Srfwe Amnsli Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available Bsdpevut Dysfx Amnjli

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm Bjdpfxovuuf Eo Amnsli feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressing force: 250 t, table width: 1,200 mm, table length: 2,000 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, ram adjustment: 150 mm, stroke adjustment: 40,200 mm, Raster Punching and Forming Press RSU 2500 - 2000 P Desch Compact Drive Electronic Press Force Measurement System Hydraulic Overload System 3-part Tie Rod, Cast Design Tool Carrier Table and Ram Clamp Raster VWA Hydraulic Roller Feeder, Band Width 500 mm, with Topochrom Roller Coating Ram Surface: 1000 x 2000 mm Strokes per minute: 20 – 150 Stroke Adjustment: 40 – 200 mm Raziol Segment Roller Oiler Optional with Kohler Strip System 20030.400/9-2000.2H Blodexcbbrjpfx Amnoi

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control Bsdpfx Amsfv Awheneli - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: new, pressure 300 t working feed 3-8 mm/sec stroke 500 mm Blodsvxw Hmepfx Amnji return speed 15 mm/sec table-size 3000 x 1500 mm tank capacity 45 l travel x / y 2600 x 1000 mm daylight 500 mm total power requirement 18,5 kW weight of the machine ca. 18 t

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Bjdpfx Amelc N Ryeneli

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Blsdpfxjlc N R Ds Amnsi

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m Blodpfevprv Rex Amnji The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: used, pressure 160 t distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm Bljdpfx Amjtqm Dgonsi no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm total power requirement 11 kW weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m - safe for hand inlay work - Conversion to West - Photoelectric barrier

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm Bjdjfn Apzopfx Amnsli dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side Bedpfx Ajcb T Twomnoli - soundproof cladding

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm Bjdjb U Hw Tepfx Amneli ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec return speed 200 mm/min

Year of construction: 1980, condition: used, pressure 100 t distance between columns - mm stroke 350 mm Bsdjdlxctspfx Amnjli table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m - cutting impact dampening - die cushion - without electrical cabinet

Condition: used, pressure 200 t throat - mm stroke 250 mm Bjdpfx Amogk Rfzonsli Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.