Used Nissan Car-Mounted Work Platform for sale (65,925)

Condition: used, Year of construction: 2007, operating hours: 1,632 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Manufactured 09/2007 Maximum working height 11.70 m Nledpfxsz A I R De Ab Usg Maximum platform height 9.70 m Total operating hours 1,632, with 1,514 operating hours on the new Kubota engine New Kubota engine installed in 2021 for €7,000.00 (net), after which it ran for 118 hours and was kept as a backup unit Platform dimensions 1.42 m x 2.49 m Platform extension 1.50 m Permissible gross vehicle weight 3,475 kg Payload 454 kg For 2 people Overall length 2.72 m x width 1.73 m x minimum height, foldable for off-road use 2.51 m Diesel engine, 4x4 Gradeability 40% Travel speed 0.6 - 6.1 km/h Lifting time with rated load 39 sec Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €9,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: new, Year of construction: 2026, total length: 7,790 mm, Articulated telescopic work platform Manitou 180 ATJ Drive Diesel Nedpfszw Rdlsx Ab Uolg Year built 2026 Work height (mm) 18,190

Condition: new, Year of construction: 2026, total length: 6,100 mm, Articulated telescopic work platform Manitou 150 AETJC Nlodpfx Abszw Rc Ij Usg Drive Electric Year built 2026 Work height (mm) 15,000

Condition: used, Year of construction: 2006, empty load weight: 12,000 kg, For sale: 3 scissor lifts Working height: 22m Price is per unit when purchasing all three Trade-in and transport options available Nledpfx Abjz Dukye Ujg For more information, please call or send a message.

Condition: good (used), Year of construction: 2007, empty load weight: 3,600 kg, For sale: well-maintained aerial work platforms. Working height: 8m. Kubota engine. Price is per unit. Trade-ins and transport can be arranged. For more information, please call or send a message. Nedpfx Absz Dukte Uslg

Condition: repair required (used), functionality: fully functional, Year of construction: 2020, operating hours: 371 h, power: 120 kW (163.15 HP), lifting height: 14 mm, overall weight: 5,500 kg, empty load weight: 4,050 kg, next inspection (TÜV): 07/2027, fuel type: diesel, Equipment: ABS, Vehicle Data Vehicle: Mercedes-Benz Sprinter Superstructure: Versalift VTM-41-150-F aerial work platform First registration: 10/07/2020 Aerial work platform, factory number: VTM41K-20001 Aerial work platform, year of manufacture: 2020 Engine: Diesel Displacement: 2,143 cm³ Power: 130 kW / approx. 177 hp Permissible total weight: 5,500 kg Unladen weight: 4,050 kg Number of seats: 2 Tires: 205/75 R16C 113/111R Vehicle type: self-propelled work machine / lift platform Superstructure manufacturer: Versalift Denmark Working height: 14.9 m Platform height: 12.9 m Load capacity: 265 kg Nlsdoz Ariaepfx Ab Ujg Permissible wind speed: 12.5 m/s Hydraulic outriggers: required/present Insulated work unit: Yes Rated voltage: 1 kV Minimum vehicle weight for stability: 3,905 kg The vehicle has prior damage. The prior damage must be taken into account during the inspection. Corresponding photos of the damage are available and can be viewed upon request or as part of the sales documents.

Condition: used, maximum load weight: 29,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2005, loading space length: 13,520 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, 3-Axle Dinkel Drop-Side Semi-Trailer VIN: D17042 Chassis / Attachments: * Air suspension // raising and lowering * 3rd axle forced steering * Jost landing legs * 3 x Daimler-Benz axles with disc brakes * Tyres: 445/40 R22.5 * Remaining tyre tread: Axles 1 & 2: approx. 60%, Axle 3: approx. 70% * 2 x PVC storage boxes * Forklift bracket * 4 x extension boards Body: * Drop-side semi-trailer * Forklift bracket Weights: * Gross weight: 36,000 kg * Unladen weight: 6,900 kg * Payload: 29,100 kg Miscellaneous: * German semi-trailer ---- New main inspections, safety inspections, or upgrades/downgrades of permissible weight are available on request. We are happy to assist you in obtaining export/transfer license plates, and can also provide delivery of your purchased vehicles within Germany. Contact us! --- Nlodpfsy N Hvwjx Ab Ujg We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to changes, prior sale and errors! --- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On a 11,000 m² lot, we offer a wide range of vehicles. Our company philosophy is defined by fairness and integrity. As customer satisfaction is very important to us, we provide an excellent all-inclusive service package, assigning you a dedicated contact person to assist you with purchasing or selling your vehicle. See for yourself! Our services for you: Loading vehicles: We are happy to help you load your purchased vehicles. Organising special transports: We are happy to assist you in organising special transports. Temporary/export license plates: We are happy to assist you in obtaining export or temporary license plates.

Condition: used, Year of construction: 2024, operating hours: 3 h, Genie Z-45/25J DC Electric Telescopic Boom Lift Nlsdpfxezmctqo Ab Uog Genie Z-45/25J DC Electric Telescopic Boom Lift, year of manufacture: 2024, hours: only 3h, working height: 15.9m, max. horizontal reach: 6.75m, lifting capacity: 227kg (2 people), all-wheel drive, weight: 7,482kg, ready for immediate use!, in very good condition. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = More information = Mast: Articulating boom Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2021, operating hours: 1,178 h, Aichi SP 14 DJ Diesel Telescopic Boom Lift Aichi SP 14 DJ Diesel Telescopic Boom Lift, year of manufacture: 2021, hours: 1,178 h, working height: 15.9 m, max. horizontal reach: 12.6 m, lifting capacity: 270 kg (2 people), all-wheel drive, weight: 8,450 kg, ready for immediate use!, very good condition. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Subject to errors and prior sale! Nlodpfxszmctko Ab Ueg For more information, please visit our website. ... Subject to errors and prior sale! = More information = Boom: Articulated boom Please contact Tobias Ebert for more information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,835 h, machine/vehicle number: 2006671, power: 36.5 kW (49.63 HP), load capacity: 450 kg, empty load weight: 13,320 kg, fuel type: diesel, working length: 22,500 mm, Equipment: all wheel drive, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nodpfxszza Arj Ab Uolg Working height: 22,500 mm Load capacity: 450 kg Maximum side load: 400 N Permissible inclination: 5° MACHINE DETAILS Operating hours: 1,835 h Drive: All-wheel drive Engine: Diesel Kubota External reference: SL18426SP

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. Nodez Dmn Depfx Ab Ujlg * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment: Complete equipment available upon request. Chassis * Steel welded structure made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two pockets below the loading platform for one ramp each * With locking plate in the head frame at the rear Under-run protection * Compliant with EC regulations Nljdjz Dmnkopfx Ab Usg Front bolster * Bolsters with single-sided operation * Rear support: Two adjustable drop-down supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Drum brakes approx. 300x200mm * Center-mounted for twin tires, ABS * Total travel of the air suspension approx. 200mm * Of which lifting approx. 140mm and lowering approx. 60mm * Control via hand lever with detent function Tires * 8x, 235/75 R17.5 * Manufacturer of our choice * Mounted on rim 6.75X17.5 with offset Splash guards * Made of PVC in front of and behind the axles, compliant with EC regulations Load securing * One hole for lashing straps in the outer frame approximately every 150 mm * Tensile force approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, tensile force approx. 8 t * Recess pockets for lashing bars 80/50 * 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Air brake system compliant with EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow * Spring brake acting on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor recessed in the outer frame. Lighting system * Lighting system compliant with EC regulations, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar, incl. connection cable with 15-pin and 2 x 7-pin plugs. Painting * Chassis blasted, cleaned and hot-dip galvanized with state-of-the-art technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of choice * Hubs: KTL black * Under-run protection: RAL 9010 Pure White * Rims: RAL 9006 Silver * Attached parts: galvanized / KTL * Black contour marking: acc. to EC, yellow on the side and rear (with ES-GE logo) Incl. accessories * Rear extension by approx. 800 mm incl. under-run protection * Extendable loading platform * Load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * With screwed drawbar eye approx. 50 mm acc. to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locking for 1x20? container, container locking 1 x 20? extendable to approx. 2,820 mm, acc. to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 x stainless steel toolboxes between or behind the axles * 2 wheel chocks with holder * Rotating beacon pluggable at the rear * Delivery of a 40-unit towing device (GG max. 13,500 kg)

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm Nljdpoz Dmndefx Ab Uog * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: used, maximum load weight: 32,050 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2009, next inspection (TÜV): 02/2021, loading space length: 11,840 mm, loading space width: 2,500 mm, loading space height: 400 mm, Equipment: ABS, * Lift axle (high mount) * Air suspension * Disc brake * Unladen weight: 5950 kg * Brakes Nledpfx Ajz Dm Dfsb Ujg * Aluminum rims ----Internal vehicle number: 9786-----Errors and prior sale excepted.

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Njdpfsy Auhzox Ab Ujlg Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: used, Year of construction: 2022, operating hours: 316 h, Manitou 200 ATJE S1 e-drive Telescopic Boom Lift Manitou 200 ATJE S1 e-drive Telescopic Boom Lift, year of manufacture: 2022, battery manufactured 03/2022, hours: 316, working height: 20 m, max. horizontal reach: 12 m, lifting capacity: 230 kg (2 persons), all-wheel drive, weight: 7,100 kg, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale reserved! Njdpfjy T Uu Ajx Ab Uolg Further information can be found on our website. ... Errors and prior sale reserved!!! = Further information = Mast: Articulating boom Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2018, operating hours: 640 h, load capacity: 200 kg, empty load weight: 2,980 kg, fuel type: electric, ATN Piaf 1000R. Year of manufacture: 2018. Working height: 10 meters. Lateral reach: 3.40 meters. Working weight: 2980 kg. 24-volt battery. Integrated charger: 230 volts. Video available via WhatsApp. Price net + 21% VAT or net export with VAT number. Nlodpfoz Dbwtex Ab Ueg We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, Year of construction: 2001, lifting height: 11,500 mm, TECHNICAL DETAILS Platform height: max. 11.50 m Nedozwpd Rspfx Ab Ujlg Number of people: max. 2 Weight of people: 215 kg Weight of materials: 55 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the item on-site before the end of the auction.

Condition: used, Year of construction: 2021, operating hours: 1,388 h, Magni DTB 28 RT telescopic platform, year of manufacture: 2021, operating hours: 1,388h, 4x4 all-wheel drive, working height: 28.50m, horizontal outreach: 21.80m, load capacity: 3 persons (454kg), engine: Deutz [55.4kW/75HP], weight: 18,400kg, dimensions (LxWxH): 8.75m x 2.50m x 2.89m, fully operational! Leasing or financing options available upon request. Mr. Ebert (Tel.) will be happy to assist you. Further details can be found on our website. Subject to errors and prior sale. Particulate filter, rental available Nsdpfxoyy H S Ho Ab Uolg = Further information = Boom type: Articulated jib Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2008, operating hours: 365 h, Manitou 180ATJ articulating boom lift / work platform, 18m working height, 4x4x4, 2008, 365 hours, diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment free of charge for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Nledpfxsz Dg Uwe Ab Usg Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2008, operating hours: 735 h, Manitou 180ATJ articulated boom lift / working platform, 18m working height, 4x4x4, 2008, 735 hours, diesel. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Njdpfx Absz Dg Uds Ujlg Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, load capacity: 230 kg, platform length: 1,400 mm, platform width: 700 mm, arm reach: 7,500 mm, working height: 16,000 mm, For sale: a like-new tracked aerial work platform with very few operating hours! TECHNICAL DETAILS Working height: 16 m Lateral reach: 7.5 m Outrigger base width: 3 m Platform size: 1,400 × 700 mm Platform load capacity: 230 kg Rotating platform MACHINE DETAILS Weight: 2,450 kg EQUIPMENT Home function Support pads Radio remote control White tracks Nledpezzazbofx Ab Usg Automatic leveling Note: A paint spot is visible on the platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 40 h, lifting height: 12,650 mm, overall weight: 4,900 kg, fuel type: electric, Equipment: UVV, Title: JLG Toucan SL12E+ aerial work platform | Year of manufacture: 2024 | Operating hours: 40 | Working height: 12.65 m | Electric 🚨 For sale: a JLG Toucan SL12E+, manufactured in 2024, with only 40 operating hours. The machine is in very good condition, almost like new, and is ready for immediate use. 🔹 Technical data Max. working height: 12.65 m Max. platform height: 10.65 m Working reach: 6.20 m Platform load capacity: 200 kg Slew range: 345° Machine weight: approx. 4,900 kg Climbing ability: 25% Operating hours: only 40 hours Year of manufacture: 2024 ⚡ Drive & Hydraulics Electrical system: 48 V DC Deep-cycle battery: 48 V / 260 Ah 2 electric AC drive motors Integrated 110/230 V high-frequency battery charger Hydraulic oil capacity: 21.5 l Hydraulic pump motor: 3.5 kW / 48 V DC 🛞 Tires Abrasion-resistant tires 457 × 178 mm Njdpfx Abeztxqrs Uslg 📍 Location: 85250 Altomünster 💰 Price: 35,000 EUR net, negotiable Inspection possible by arrangement. Please contact us if you have any questions or are interested.

Condition: used, Year of construction: 2021, operating hours: 1,174 h, load capacity: 200 kg, empty load weight: 2,850 kg, fuel type: electric, ATN Piaf 10RE. Year of manufacture: 2021. Operating hours: 1174. Working height: 10 meters. Lateral reach: 3.5 meters. Working weight: 2850 kg. Njdpfxoz A If Io Ab Uolg Working width: 100 cm. 24-volt batteries. Integrated charger: 230 volts. Video available via WhatsApp. Minor damage to the side cover; see the last photo. Price: net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad SPR 324 Kotschenreuther 3 axles Nlodpfxjy Dmq Dj Ab Usg