Used Oce/Canon Plotter for sale (294)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside Lrodpfxjlthguo Ai Hor * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: like new (used), functionality: fully functional, empty load weight: 7,500 kg, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space height: 2,850 mm, total length: 13,700 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385.55 r 22.5, color: red, Year of construction: 2022, Equipment: ABS, Kögel semi-trailer, year 2022, French curtain-sider with adjustable internal height from 2.80 m to 3.0 m, sliding roof, rear doors, wheel well, lateral stanchion slots, EBS, extendable rear posts, 3 SAF disc-braked axles, excellent condition, ready for Italian registration, OVERHAULED – DEALER INTERDRIVE SRL – PARMA Lrjdpfsyizz Hex Ai Her

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Lsdpevupr Tsfx Ai Horr Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Year of construction: 2023, condition: used, DTF plotter + Plotter Epson SureColor SC-F6400H 6 colors with black HD Lredpfxey E Nclo Ai Hsr

Condition: used, mileage: 1,81,711 km, power: 110 kW (149.56 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,006 kg, maximum load weight: 1,194 kg, overall weight: 3,200 kg, wheelbase: 3,400 mm, fuel: diesel, fuel consumption (urban): 8.1 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.7 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 5,304 mm, Year of construction: 2017, construction height: 1,990 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, differential lock, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, trailer coupling, Standard Equipment: - Sliding door rail cover - Passenger airbag with deactivation function - Driver and passenger airbags - Anti-lock braking system (ABS) - Drive type: All-wheel drive - Exterior mirror, aspherical (left) - Exterior mirror, convex (right) - Cab flooring: rubber Ljdswyghuepfx Ai Horr - Electronic stability program (ESP) with brake assist, ASR/ABS, EDS, and hill start assist - Driving assistance system: Brake Assist (HBA) - Driving assistance system: Multi-Collision Brake - Windscreen: tinted laminated safety glass - 6-speed manual transmission - Lockable glove compartment - Cabin air filter: pollen filter - Body/Construction: Van - Roof variant: Standard roof - Fuel tank: 70 litres - Adjustable steering column (steering wheel) - Engine: 2.0 L – 110 kW TDI - Non-smoker package - Wheelbase: 3,400 mm - Tyre repair kit - Diesel particulate filter - Low-emission according to Euro 6 standard - Sliding door, cargo/passenger compartment, right - Power steering - Seat upholstery: fabric - Start/Stop system - Daytime running lights - Front door storage compartment - Load/passenger compartment trim: half-height hardboard panel - Heat-insulating glazing - Electronic immobilizer Special Equipment: - Trailer hitch: fixed ball head - Trailer Stabilization Program - Audio system Composition Audio (radio, SD card slot, MP3 playback) - Exterior mirrors, electrically adjustable and heated - Electrical Package 1 - Electrical interface for external use (CAN bus) with terminal connection - Fixed window, cargo/passenger compartment: front right, rear without window - Power windows - Tailgate with glazing - Heated rear window - Heated rear window with wiper system - Interior mirror with automatic dimming - Climatic air conditioning system (cab) - High load space partition wall with fixed window - Loudspeakers (2) - Truck registration - Mobile phone interface (Bluetooth) - Cabin seats: front double passenger seat with storage compartment - Cabin seats: driver’s seat height adjustable - Cabin seats: driver’s seat with lumbar support - Central locking with remote control - Auxiliary heater - Permissible gross weight: 3.20 t (incl. reinforced 16" steel rims) - Certificate of Conformity (CoC) available Sale exclusively to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: good (used), functionality: fully functional, Station 1: Angle adjustment from 30° - 120° Ledpfxezhgp Ej Ai Herr Cutting length 150 mm Station 2: Notching 100 x 20 mm

Condition: new, Year of construction: 2026, CNC knife, creasing and cutting plotter, cutting plotter, creasing plotter Machine configuration: Drives: Helical hardened ground X, Y ball screw Z axis Linear bearing: Trapezoidal rails Travel speed: 80 m/min Program resolution: 0.005 mm (0.0025 servo motors) Positioning accuracy: 0.01 mm Double-sided gate drive: yes Electrospindle power: 7.5Kw S6 Maximum electrospindle speed: 24000 rpm Electrospindle inverter: yes Brushless electrospindle: yes Cutter shank diameters: from 1 to 20 mm Construction: Steel welded Power supply: 400 V Possible additional options: - tool cooling - positioning bases with control - central lubrication system - Pneumatic extraction foot - Manual manipulator - 10-position linear magazine - 1.50 mm pneumatic oscillating knife - Creasing head - Circular knife - Material height sensor - Tool length and diameter sensor - 24-inch touchscreen monitor - Remote service access - 244 m3 vacuum pump with control system - Gate angle auto-calibration - Intelligent energy recovery - Safety fence Material fixing: Vacuum, pneumatically controlled sections with expansion valve Control Real-time industrial control system steel and soft metals: aluminum, brass, copper, bronze etc. composites: dibond, alucobond, etc. plastics: polycarbonate, PVC, plexiglass, teflon, polyamides, gambit, rubber, etc. solid wood and wood-based panels: plywood, chipboards, MDF, OSB, etc. paper, cardboard, foil, etc. foams, extruded materials, etc. leather, textiles etc. #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminum #aluminum Lsdpot N Stxjfx Ai Hsrr #brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell

Condition: good (used), functionality: fully functional, empty load weight: 7,400 kg, maximum load weight: 30,600 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2001, loading space length: 13,650 mm, loading space width: 2,520 mm, loading space height: 1,110 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 445.45 r 19.5, color: silver, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, Used lowered curtain-sided semi-trailer Krone with sideboards, 3 axles with disc brakes and first axle liftable, aluminium side walls 70 cm high, curtain with lift/lower and sliding roof system, ABS with air suspension, internal usable height 2.85 m, year 2001, DEALER INTERDRIVE SRL-PARMA Ledpfeywhvbox Ai Horr

Condition: excellent (used), mileage: 7,695 km, power: 331 kW (450.03 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler Lrsdpfx Aioxn Sr So Hor - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Rear view camera - Sunshade flap - Stability control - Toolbox - Power take-off (PTO) - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 24,830 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Condition Technical condition: very good Visual condition: very good VOLVO FM 450 8X4 TRIDEM WITH OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED EURO 6 L PACKAGE 450 HP 8X4 TRIDEM DRIVELINE, LAST AXLE LIFTED AND STEERABLE AIR SUSPENSION WHEELBASE 520 CM I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE FM CAB WITH AIR CONDITIONING, NAVIGATION, XENON, CAMERA 3 SEATS IN CABIN TRAILER COUPLING MULTIPLE TOOLBOXES ONLY 7,695 KM!!! OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED Polystyrene volume: 22 m3 Binder volume: 13 m3 Dosing mixer: 400 l Pumping mixer: 800 l Height: 440 cm Water tank: 1,000 l Production of lightweight subfloors with polystyrene: up to 15 m3/h Production of foam concrete: up to 25 m3/h Drive: Vehicle PTO CE Removable BDF system FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Lsdpsvxhwvefx Ai Horr Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Ljdpfxeym Edto Ai Hsrr Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, mileage: 2,17,582 km, power: 118 kW (160.44 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 4,990 kg, maximum load weight: 2,500 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,300 mm, loading space length: 5,498 mm, loading space height: 2,125 mm, Year of construction: 2013, construction height: 3,300 mm, Equipment: ABS, onboard computer, tail-lift, The used Iveco EuroCargo ML 75 E 16 P is a yellow box truck with a first registration date of 15.07.2013. It has a mileage of 217,582 km and complies with the Euro 5 emissions standard, supporting environmental friendliness. The truck is powered by a reliable diesel engine delivering 118 kW (160 hp) and a displacement of 3,920 cc. The vehicle features an automatic transmission for increased driving comfort. The truck offers an internal box length of 5.5 meters, making it ideal for goods transportation. With a vehicle height of 3,300 mm, width of 2,300 mm, length of 7,300 mm, and a wheelbase of 3,690 mm, this truck provides ample space and flexibility. The permissible gross vehicle weight is 7,490 kg. The box body features two seats and two doors, and the previous owner was a single operator. This truck is equipped with a green emissions badge (category 4), allowing access to low-emission zones. Viewings are possible without prior appointment, and delivery within Germany can be arranged for an additional charge. Lodpfswwmxujx Ai Hsrr Sale only to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4020-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months Lsdpfx Aistizays Herr - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Ledetizavopfx Ai Horr Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, mileage: 1,22,500 km, power: 96 kW (130.52 HP), first registration: 12/2016, fuel type: diesel, maximum load weight: 900 kg, overall weight: 3,500 kg, emission class: euro6, For information Ledpfey Dtncox Ai Horr

Condition: good (used), functionality: fully functional, empty load weight: 8,100 kg, maximum load weight: 28,700 kg, axle configuration: 3 axles, first registration: 11/2002, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, suspension: air, tire size: 385.65 r 22.5, color: green, Year of construction: 2002, operation weight: 36,800 kg, Equipment: ABS, sem tecnokar single box side tipper, 100cm side rails in 4 sections, 3 disc axles with 1st liftable and 3 steerable, electric lift lowering and cover find out , rear doors, year 2002, pallet rack, sliding sheets, ebs, air suspension, overhauled until 31.07.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Lrjdperllhyjfx Ai Hor

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product Lsdpfxjtzmifo Ai Hjrr -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Lodpfx Aswcd Tmoi Herr Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: used, Year of construction: 2022, color: grey-black, empty load weight: 5 kg, first registration: 10/2022, fuel type: gasoline, gearing type: mechanical, TITLE: USED CONTAINER WITH CUSHIONED, NON-HOISTABLE, WITH ALUMINUM SIDES TR1 WITHOUT REAR SIDE REF: 22-U-143 TYPE: curtain-sided NEW: no LID: yes OPENING: from all sides OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 7.20 m EXTERNAL WIDTH OF THE BODY: 2.55 m HEIGHT OF THE CUSHION: 2.50 m FRONT SIDE: 0.80 m SIDE SIDE: 0.80 m BOTTOM: wooden COLOUR: whiteThe prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. Ledpfx Aijv Hifdj Herr For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m Lrsdpfexa Eu Rjx Ai Her - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Lodpsr Iig Sjfx Ai Hjrr Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: used, mileage: 1,10,646 km, power: 118 kW (160.44 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 4,990 kg, maximum load weight: 2,500 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,300 mm, loading space length: 5,498 mm, loading space width: 2,447 mm, loading space height: 2,125 mm, Year of construction: 2013, construction height: 3,300 mm, Equipment: ABS, onboard computer, tail-lift, Transmission damage! The used Iveco EuroCargo ML 75 E 16 P is presented as a reliable transporter with a box body internal length of 5.5 meters. The vehicle is equipped with a 3,920 cc diesel engine delivering 118 kW (160 hp) and complies with the Euro 5 emissions standard. The automatic transmission ensures comfortable driving. With a mileage of 110,646 km and first registration in July 2013, it is in good condition. The vehicle is functionally upgraded with useful features such as a tail lift and air suspension. The transporter measures 7.3 meters in length, 2.3 meters in width, and 3.3 meters in height. Its wheelbase is 3,690 mm, and the permissible gross weight is 7,490 kg, making it ideal for commercial applications. Lrodpexmt Ixefx Ai Hor The transporter was previously owned by a single owner and is currently finished in yellow. The vehicle holds an emissions sticker of class 4 (green), allowing access to low-emission zones. Sale only to businesses (agricultural, freelancers, small or large commercial enterprises) or for export. Subject to prior sale and errors excepted.

Condition: good (used), 50-position filler with crown cap closure. Lrsdpfx Aevq Suiji Her Used in a winery for filling wine into 1L glass bottles

Condition: refurbished (used), Year of construction: 2010, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 2.519, year of last overhaul: 2026, protection type (IP code): IP65, ejection height: 1,100 mm, nominal power: 4 kW (5.44 HP), operating pressure: 6 bar, operating temperature: 80 °C, working range: 950 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 1 rpm, temperature: 80 °C, total height: 700 mm, compressed air connection: 6 bar, BvL cleaning system, Model Ocean RW 900 S. Lsdezf Hm Sopfx Ai Hjrr Optional features such as filter technology, etc., are still available.

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible. Lrsdpfowt Dabjx Ai Hjr