Used Olympus Ch Microscope for sale (13,120)

Condition: used, mileage: 441 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, municipal new vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper with Meiller and Küpper-Weisser winter service equipment. MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 transfer kilometers 18,000 kg permissible total weight 22,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load in winter service operation up to a maximum of 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, 2-section with quick couplings, Küpper-Weisser Front mounting plate, type F1/C, according to DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for additional lighting on the rear of the vehicle Heated windshield Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external attachments) TGS NN medium cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as an external planetary axle, driven, switchable High configuration Differential lock in front and rear axle Meiller 3-sided tipper approx. 4.80 m x 2.42 m x 0.60 m high Front wall 0.80 m high Side walls M-Jet, steel HB 450, 2.5 mm Hfodpoyv Tt Njfx Al Del Bridge floor made of steel HB 400, 4 mm Tie-down eyes fully retractable in the floor panel Side walls of the tipper body, pivoting and foldable, deep latches Rear wall of the tipper body, pivoting with automatic latch Transfer case MAN G172 with road and off-road gear MAN TipMatic 12.26 OD Gear function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, water, 4 kW Trailer hitch, ring-feder type RF40/G150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung and rear axle air-suspended Front axle AP 9 tons, rear axle AP 13 tons Stabilizer for front and rear axle MAN Comfort Steering Hill start assist MAN EasyStart Full brake assistant Lane departure warning LDW EBS ASR ESP ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, adjustable 390 liter aluminum tank, right Sun visor 2 rotating beacons and 2 work lights Dustbin in the cab Reversing warning, acoustic, can be switched off when reverse gear is engaged Rear view camera Multi-function steering wheel Control panel MAN EasyControl, 2 functions operable from the outside with the door open Electrically adjustable and heated exterior mirrors Electrically operated windows MAN Media System Advanced 7 inch MAN sound system Smartphone integration Driver's comfort seat, air-suspended with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Municipal new vehicle with day registration on 02.12.2025 Archive images Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2517

Condition: used, first registration: 07/2013, Year of construction: 2013, Schmitz Cargobull SCB S3T MEGA curtain-sided semi-trailer, Tautliner, lift axle, elevating roof Hedpezmf Hasfx Al Defl • ABS • EBS • XL – 12642 load securing certificate • EDSCHA – cover • Rear portal doors • Internal dimensions: 13,620 x 2,490 x 2,970 mm (L x W x H) • Mechanical elevating roof • Permissible total weight: 36,000 kg / 39,000 kg technically possible • Unladen weight: 6,904 kg • Disc brakes • Lift axle • 3 x air-suspended SCHMITZ axles • Lifting/lowering system • Tire size: 435/50 R19.5 • Tire tread: 4/4 5/5 5/6 - German semi-trailer! - TÜV/inspection on request and subject to extra charge: new! Errors and prior sale excepted! = Further information = Unladen weight: 6,904 kg

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L Hsdpfezlnb Rjx Al Dsfl - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is a device equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external storage of data and images. This allows for quick and easy acquisition of information about the composition and morphology of specimen surfaces, even down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both the examination of macrostructures and microstructures is possible. Through special attachments, the range of applications can be significantly expanded, enabling, for example, analytical investigations in micro-areas of the surface. The device can be operated using conventional switches or via the keyboard and mouse (optional). The electron optics and vacuum control are conventional. The functions of the image memory are operated using the keyboard or mouse (optional). A separate information display is located centrally on the control panel for displaying the menus. This user manual is intended to serve as a guide for the user to achieve the best possible results with the device. The explanations have been kept as simple as possible in order to provide even a less experienced user with the necessary knowledge. Magnification range: 20x to 300,000x at a 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at a 50 mm working distance Hfjdpfezdthyjx Al Del Resolution: 4 nm - guaranteed with tungsten filament at 30 kV, 6 mm working distance, untilted specimen 25 nm - guaranteed with tungsten filament at 1 kV, 6 mm working distance, untilted specimen 3.5 nm - guaranteed with optimized LaB6 filament at 30 kV, 6 mm working distance, untilted specimen Scope of supply: (DSM 962 with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchasing. We will be happy to answer any further questions you may have by phone.

Condition: used, Big-bag emptying station (0.5 m³, injection blower) – Plastcompactor HV 50/110 (600–700 kg/h, 4 m³ silo with feed screw, agitator, discharge screw, DS drive 110 kW, 2 compacting discs Ø 500 mm with kneading bars and water cooling, Siemens S7) – Post-cutting mill SML 45/100-S3-2 (10 mm screen, 3x1 rotor/2 stator knives, shear cut, spray mist cooling, hydraulic opening, 45 kW) – Fine material separation with a zig-zag sifter and return system – Material discharge with a double big-bag holder MFT 45/350, blower 7.5 kW, cyclone. Hsdez Aiuyspfx Al Djfl

Condition: new, TDM - CH / directly driven grinding spindle type TQ 120.001.01 / TQ 120001, unused, as good as new condition Hfjdpjz Ac Sxefx Al Djl

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Hodpfx Aozy Itcjl Defl Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Hjdpfxezvdxao Al Defl Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: good (used), Year of construction: 2002, operating hours: 4,795 h, fuel type: diesel, mast type: duplex, Ausa CH - 150 X4 Rough Terrain Forklift Duplo, with side shift. 4795 hours. ISUZU Diesel, 2002. Hfedpfxjzqyuyj Al Djl A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, mileage: 500 km, power: 213 kW (289.60 HP), overall weight: 13,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,350 mm, loading space length: 4,000 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, municipal new vehicle MAN TGM 13.290 4x4 BL CH all-wheel drive tipper with front mounting plate and Küpper Weisser winter service equipment, MAN PowerMatic 08.13 OD 8-speed automatic transmission, air-sprung rear axle, 2 x differential locks on front and rear axle, heated windshield, automatic climate control, auxiliary heater, reversing camera, premium driver's seat package, MAN manufacturer's warranty from the date of initial registration, and more. MAN manufacturer's warranty from the date of initial registration (expected 10/2026) Equipment: CC short cab with rear window Wheelbase 3,250 mm 6,300 kg front axle, 9,500 kg rear axle permissible front axle load 6,300 kg, permissible rear axle load 9,200 kg all-wheel drive 4x4 differential lock in front and rear axle winter service hydraulics 2-circuit with screw couplings, Küpper-Weisser front mounting plate winter service lighting heated windshield hydraulic pump on the engine, double gear / tandem pump, 16 ccm and 11 ccm diesel engine with 290 hp and 1,150 Nm of torque Euro 6 e Meiller Trigenius D208 3-sided tipper, approx. 4.00 m x 2.35 m x 0.50 m high headboard 0.70 m high load securing with floor and side wall lashing eyes floor made of 4 mm steel HBW 450 swinging and folding rear wall transfer case MAN G102, with road and off-road gears transfer case lock management, electronic (VSM) MAN PowerMatic 08.13 OD 8-speed automatic transmission transmission function MAN Idle Speed Driving air conditioning, Climatronic water auxiliary heater 4 kW trailer coupling, Ringfeder type RF40/G145B with air pressure connections trailer load with continuous braking system 12,000 kg trailer load with continuous braking system 14,000 kg technically permissible trailer load with continuous braking system 15,000 kg technically possible permissible total vehicle weight 20,000 kg permissible technical total vehicle weight 24,000 kg permissible technical possible total vehicle weight 25,000 kg tipping hydraulic connection at the rear for tipping trailer front axle leaf-sprung and rear axle air-sprung axle ratio, i=5.07 stabilizer for front and rear axle shock absorbers for front and rear axle hill start assist MAN EasyStart EBS with ABS, ASR and ESP disc brakes on front and rear axle high-performance engine brake MAN EVBec, adjustable full brake assist tire pressure monitoring system TPM emergency brake assist EBA lane departure warning LDW front detection distance warning traffic sign recognition turning assistant driver attention monitoring system MAN Driver Monitoring System preparation for alcohol interlock cruise control reversing motion system with reversing camera sun visor 24 V battery management system 2 rotating beacons LED on the cab roof Hfsdpfxszp Tcuj Al Djl LED work lights LED daytime running lights high beam assistant cool box in the cab multifunction steering wheel MAN EasyControl control panel, 4 functions, operable from the outside when the door is open electrically adjustable and heated exterior mirrors electric windows MAN Media System Advanced 7 inch instrument cluster Professional 12.3 inch MAN sound system premium driver's seat package with air-sprung driver comfort seat, lumbar support and shoulder adjustment truck has delivery mileage municipal new vehicle with day registration expected in 09/2026 and MAN manufacturer's warranty from the date of initial registration Photos are archive images Vehicle is still in production Expected delivery date 10/2026 Price NET excluding 19% VAT. We would be happy

Condition: new, mileage: 500 km, power: 213 kW (289.60 HP), overall weight: 13,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,350 mm, loading space length: 4,000 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, municipal new vehicle MAN TGM 13.290 4x4 BL CH all-wheel drive tipper with front mounting plate and Küpper Weisser winter service equipment, MAN PowerMatic 08.13 OD 8-speed automatic transmission, air-sprung rear axle, 2 x differential locks on front and rear axle, heated windshield, automatic climate control, auxiliary heater, reversing camera, premium driver's seat package, MAN manufacturer's warranty from the date of initial registration, and more. MAN manufacturer's warranty from the date of initial registration (expected 10/2026) Equipment: CC short cab with rear window Wheelbase 3,250 mm 6,300 kg front axle, 9,500 kg rear axle permissible front axle load 6,300 kg, permissible rear axle load 9,200 kg all-wheel drive 4x4 differential lock in front and rear axle winter service hydraulics 2-circuit with screw couplings, Küpper-Weisser front mounting plate winter service lighting heated windshield hydraulic pump on the engine, double gear / tandem pump, 16 ccm and 11 ccm diesel engine with 290 hp and 1,150 Nm of torque Euro 6 e Meiller Trigenius D208 3-sided tipper, approx. 4.00 m x 2.35 m x 0.50 m high headboard 0.70 m high load securing with floor and side wall lashing eyes floor made of 4 mm steel HBW 450 swinging and folding rear wall transfer case MAN G102, with road and off-road gears transfer case lock management, electronic (VSM) MAN PowerMatic 08.13 OD 8-speed automatic transmission transmission function MAN Idle Speed Driving air conditioning, Climatronic water auxiliary heater 4 kW trailer coupling, Ringfeder type RF40/G145B with air pressure connections trailer load with continuous braking system 12,000 kg trailer load with continuous braking system 14,000 kg technically permissible trailer load with continuous braking system 15,000 kg technically possible permissible total vehicle weight 20,000 kg permissible technical total vehicle weight 24,000 kg permissible technical possible total vehicle weight 25,000 kg tipping hydraulic connection at the rear for tipping trailer front axle leaf-sprung and rear axle air-sprung axle ratio, i=5.07 stabilizer for front and rear axle shock absorbers for front and rear axle hill start assist MAN EasyStart EBS with ABS, ASR and ESP disc brakes on front and rear axle high-performance engine brake MAN EVBec, adjustable full brake assist tire pressure monitoring system TPM emergency brake assist EBA lane departure warning LDW front detection distance warning traffic sign recognition turning assistant driver attention monitoring system MAN Driver Monitoring System preparation for alcohol interlock cruise control reversing motion system with reversing camera sun visor 24 V battery management system Hfedpozp Tcnjfx Al Dsl 2 rotating beacons LED on the cab roof LED work lights LED daytime running lights high beam assistant cool box in the cab multifunction steering wheel MAN EasyControl control panel, 4 functions, operable from the outside when the door is open electrically adjustable and heated exterior mirrors electric windows MAN Media System Advanced 7 inch instrument cluster Professional 12.3 inch MAN sound system premium driver's seat package with air-sprung driver comfort seat, lumbar support and shoulder adjustment truck has delivery mileage municipal new vehicle with day registration expected in 09/2026 and MAN manufacturer's warranty from the date of initial registration Photos are archive images Vehicle is still in production Expected delivery date 10/2026 Price NET excluding 19% VAT. We would be happy

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch Hfodpfx Aloyuk S Ss Djl 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CMC 250 turbocode inserter for sale! 2014 the year of made Only 7 Million clics on meter! 16.000 envelopes /hr Hsdszza H Ropfx Al Defl 60.000 A4 sheets/hr 2 rotary feeders with cameras Dual channel Pinless Hunkeler UW6 unwinder Tecnau cutters Tecnau waste exhausting system File based integrity system with Datalogic cams Address printing system Label attaching system See video and pictures!

Condition: used, axle configuration: 2 axles, first registration: 12/2011, suspension: air, Year of construction: 2011, Suspension: Air suspension Unladen weight: 3,050 kg Payload: 14,950 kg GVWR: 18,000 kg Vehicle number: Trailer: 14 Schmitz Cargobull AWF 18 / BDF interchangeable bodies / 2 x SAF axles .: WSK000001263213 2 x SAF axles Unladen weight: 3050 Total weight: 18000 No liability for printing and typographical errors, changes, prior sale and mistakes! Hfodpez Alt Sefx Al Djl = Company Information = No liability for printing and typographical errors, changes, prior sale and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, maximum load weight: 1,315 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 03/2009, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 1,200 mm, Equipment: ABS, Humbaur HKN Sandwich Box Trailer – Special Offer Int. No. for inquiries: 0825638 * Body manufacturer: Humbaur * Type: HKN * Box trailer * ABS * EBS * Sandwich box trailer, exterior silver, interior white * Rear with double doors and external V2A hinges * Twist-latch locking system * Lashing rail * Recessed lashing points with counter plate * Aluminum locking bar, square, with slotted anchor rail Dimensions (cargo space/loading area) Cargo space length: 3,000 mm Cargo space width: 1,800 mm Cargo space height: 1,200 mm ----Price: 3,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Hjdpfx Aljzhp Tms Djfl Typographical errors, errors and prior sale excepted.

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Hfodpfszry I Aex Al Dsl Empty weight: 500 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 1410A, mileage: 86,487 km, power: 93 kW (126.44 HP), first registration: 07/1994, fuel type: gasoline, fuel consumption (combined): 14 l/100km, color: green, gearing type: automatic, emission class: euro1, Equipment: all wheel drive, trailer coupling, TUV and AU are made NEW and gets a green environmental badge :-) Special army version with long wheelbase, the Mercedes-G is in a super good condition, even the body is in a good condition! unimaginable how the Swiss manage that) The top is super fast from PKw with 8 seats to pick-up with 2 seats to convert, there are about 10 G-models of this export train in stock, the interior isL/W/H 1760/1520/1250, immediately ready for use, directly from the military very well maintained and maintained!!! Equipped with: 2850mm wheelbase, automatic with 4 gears plus off-road reduction, four-wheel drive, 4-cylinder gasoline engine with 2299cm? The fuel consumption on the highway is about 13 liters per 100km and on short distances just under 15 liters (this information I got from my customers), rear axle lock, (truck registration possible then only 2 seats in front), good tires 205R16, and much more. - We also have some accident vehicles in stock at favorable prices! - Ideal as a rally vehicle or hobby vehicle, also as a vehicle for hunting just great, to the G I also have the matching 1-axle off-road trailer with overrun brake on offer, - Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Hfedpfx Alsqx Sybe Dsl

Year of construction: 2007, condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Hfodpfx Alevtqrxs Dol

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 4,418 h, load capacity: 7,000 kg, lifting height: 3,000 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, drive type: Treibgas, LPG forklift Load center: 600 Hsdpowzdv Sefx Al Defl Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good 3rd valve, 4th valve,

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. Hfedpfx Aszyrpnjl Del In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) Hedpfx Aeyvh Nxol Djfl NO CE mark, NO CE declaration of conformity

Condition: good (used), mileage: 4,68,653 km, power: 180 kW (244.73 HP), first registration: 05/2019, fuel type: diesel, tire size: 265/70 R19,5, axle configuration: 4x2, fuel: diesel, color: orange, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 9,460 mm, loading space width: 2,430 mm, loading space height: 2,170 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, spoiler, tail-lift, = Additional Options and Accessories = - Roof spoiler - Speed limiter - Radio - Spare wheel - Rear view camera - Side door - Sun visor = Notes = Rear liftgate Dhollandia DHLM.30, 1500 kg Cargo area length: 225 cm Internal dimensions of the cargo area: L 946 x W 243 x H 217 Rear view camera Cruise control Air conditioning Sun visor Spare wheel = Further Information = General Information Model year: 2026 Registration number: 74-BNJ-6 Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Axle Configuration Tire size: 265/70 R19.5 Axle brand: Anders Brakes: Disc brakes Front axle: Max. axle load: 4480 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 8480 kg; Tire tread depth left (inside): 55%; Tire tread depth left (outside): 55%; Tire tread depth right (inside): 55%; Tire tread depth right (outside): 55%; Suspension: Air suspension Weights Unladen weight: 8,030 kg Payload: 3,960 kg GVWR: 11,990 kg Functional Tail lift: Dhollandia DHLM.30, rear liftgate, 1500 kg Interior Hfjdoznwnrspfx Al Dsl Interior: grey Maintenance APK (Technical Inspection): valid until 06.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, mileage: 81,482 km, power: 316 kW (429.64 HP), first registration: 12/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust with ground outlet, rear axle differential lock, multifunction steering wheel, emergency brake, sun visor, driver's air comfort seat, LED daytime running lights, perimeter/beacon lights, RIO Box, Truck Advanced radio with 7'' display including Europe navigation, Lane Guard, air pressure assist, Luis turning assistant HS Olympus Industrial 23 m³ with HS rear loader tipping system Comfortlift type U-K-KL EuroMax, suitable from 80 l to 5 m³, bulky waste collection with folding chute, comfort gearshift, centralized lubrication system. Tipping system lifts approx. 2 t, Welvaarts scale. Hodpergmm Uofx Al Defl

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump Hodpownb D Tjfx Al Dofl 2 x integrated Turbo Pumps

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns Hjdpfjzzz Naox Al Djfl - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.