Used Omet Vf 670 F1 for sale (3,309)

Operating hours: 1 h, condition: new, functionality: fully functional, Keithley 6517b Electrometer / High Resistance Meter is new, only tried, still with foiled display. With high value accessories (box, cables, adapters, humidity probe, temperature probe, etc.). Ljdpfxjz Akxge Ab Ujrt

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800. Lrjdpfszlcciox Ab Uot

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine Ledpfxez Dum Us Ab Uort With CNC control, HEIDENHAIN / Type: TNC 155 Machine probe / coolant system Enclosure / cabin / control cabinet: 1260 x 500 x 1700 mm Travel ranges 700 x 550 x 550 mm / Clamping area, table surface: 1000 x 490 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 12,300 h, HITACHI Hydraulic Excavator type ZX 670 LCH-3 Year of construction: 2011 Hours: 12 300 hours Engine brand: ISUZU Ledpfx Abezzwb Ej Uert Engine power: 345 KW Excavator weight: 67 300 KG Supplied with a bucket in perfect condition. Operating status OK

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Lrsdpfxozg Tmhs Ab Ust Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Lrodpfxetpwrqs Ab Ust Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: good (used), Year of construction: 1997, Used Lathe DANOBAT TCN-12 CNC, 1500 mm, Fanuc 0-T, Year of Manufacture 1997 Swing over bed 670 mm Swing over carriage 525 mm Distance between centers 1500 mm 12-position tool post CNC control: Fanuc 0-T Ljdszz Rv Nepfx Ab Uort Chip conveyor

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Suction capacity: 5750 m3/h Ledezq Uryopfx Ab Uert No of Filter sleeves: 60

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Ledpfx Abezn I N Hs Uort Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included Lodpjza A Enjfx Ab Ujrt • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: used, Vacuum Filler Handtmann VF 300 3 The Handtmann VF 300 vacuum filler is the ideal solution for precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food production, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touch-button control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. The machine is equipped with a standard container lift for 200 L containers. The filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 10,000 kg/h - Functions: filling, portioning Lsdszwlpiopfx Ab Ujrt Portion size: 5 g – 100,000 g Number of portions: up to 500 portions/min Filling pressure: 35 bar Hopper capacity: 90 / 240 L Voltage: 380 V (3 + N, 50 Hz) Power: 9.5 kW Weight: 1,302 kg Dimensions (W x D x H): 2,000 x 1,350 x 2,060 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, machine/vehicle number: MBR 1000Kg, Demag ELKE overhead crane, bridge crane, industrial crane Crane available in duplicate!!! Year of manufacture 1983 + 1985 Lsdpfx Aezffmdjb Ujrt Load capacity / lifting capacity 1 ton - 1000 kg Gauge 6700 mm, overall dimensions approx. 6800 mm With floor control and fine positioning Demag PLV82NF wire rope hoist 1000 kg Lifting height 4.5 m Overall height from top of crane to hook approx. 650 mm Head beam length with buffer approx. 140 cm Crane is dismantled and immediately available Good used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Year of construction: 2017, condition: used, This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working condition and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Ljdpoxx Ax Rsfx Ab Ujrt Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Biolumi nescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Condition: not inspected (used), functionality: unexamined, KEB frequency inverter with potentiometer KEB F5 15F5A1E-350A Input: AC 3-phase 50/60 Hz 400V 31.2A UL: 480V 27.3A Output: AC 3-phase 0…599Hz 0…Uin 24A UL: 21A 17kVA Lsdpfx Aezkay Aob Uort

Condition: excellent (used), functionality: fully functional, Handtmann VF616 Filling and Portioning Line with Loma Metal Detector and AL Line Complete Handtmann line for filling, portioning, linking, and hanging of meat products, equipped with a Loma metal detector and accessories for use with 200-liter meat trolleys. The set includes: 1. Handtmann vacuum filler with lift for 200 l trolleys Brand: Handtmann Model: VF616 Serial No.: 26190 Year of manufacture: 2009 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 17.3 A Power: 12.0 kW Vacuum pump: Busch, type KC 0016 E Vacuum pump serial no.: V19220646 Performance: 19 m³/h Dimensions: 1900 × 1350 × 2120 mm 2. Stainless steel meat trolley Capacity: 200 liters 3. Loma pipeline metal detector with Handtmann linking attachment Brand: Loma Detector type: IQ² Serial No.: MHPLEU-36885 Date of manufacture: 21.10.2004 Power supply: 230 V, 1 Ph, 50 Hz Current consumption: 0.2 A Throughput diameter: Ø 55 mm Handtmann attachment type: 34-5 No.: 13059 Overall dimensions: 500 × 600 × 500 mm 4. Handtmann mobile linking and hanging line Linking machine: Brand: Handtmann Model: 216-21 No.: 1041 Year of manufacture: 2003 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 3.5 A Lodpfexk T Iysx Ab Uort Power: 2.5 kW Dimensions: 1500 × 700 × 1250 mm Hanging line: Brand: Handtmann Model: 220-16 No.: 1643 Year of manufacture: 2007 Dimensions: 2650 × 550 × 1300 mm The integrated Handtmann system with Loma metal detector is designed for the automatic filling, portioning, linking, and hanging of sausages. The system connects the VF616 vacuum filler with the IQ² metal detector and the linking and hanging module, delivering high efficiency and process precision.

Condition: refurbished (used), functionality: fully functional, total length: 800 mm, total width: 800 mm, total height: 1,500 mm, warranty duration: 12 months, overall weight: 450 kg, power: 4 kW (5.44 HP), pressure: 55 bar, • Designed for automatic dosing, twisting and filling of various mixtures under vacuum • Precise portioning which varies from 5 to 10000 grams • Made of solid stainless steel construction Lrjdpszud A Nsfx Ab Ust • Equipped with microcomputer control • Productivity: 2600 kg. / hour • Pressure: 55 bar • Power: 4 kW • Dimensions: approx. 1200 /800 /800 mm. • Weight: approx. 450 kg. • 1 year warranty

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: Lredpfx Abox D I Stj Ujt • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: used, mileage: 3,243 km, power: 397 kW (539.77 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Digital tachograph R4.1. The ESE 6 RD 8000 is the ideal vehicle for demanding civil engineering and waste disposal work. The combination of high suction power and compact dimensions makes this model a versatile all-rounder for use on construction sites. Features include: entry lighting for driver and passenger, sun visor, driver's air-suspended seat, cooler box, all-round lights on the cab, LED daytime running lights, air horns on the cab, reversing camera, LED work lights, trailer hitch with ball head, articulated hose carrier with swivel joint with swivel motor, swivel range 180°, additional swivel joint as a 3rd link, hydraulic swivel drive, MAN sound system, RIO box, MAN radio with 12.3" screen, navigation with SD card, lane guard system, reversing camera, ESE 32/8DV2-K (ESE 6RD 8000) PTO OMSI, high-performance double fan Qmax 42000 m³/h Pmax 40000 Pa, 8 m³ tipping container, one-sided discharge, tipping height approx. 2000mm, high-pressure water system 200 bar 21l/min, RSP exhaust silencer, emergency stop button, RM Vario suction nozzle, 2x PU suction hose extension each 2 meters, fan and superstructure, rotating module on the suction nozzle, gas detection system, grounding system. Lrjdozc A Arspfx Ab Uet

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Lredjwrfamspfx Ab Ujt

Condition: used, mileage: 5,47,696 km, power: 426 kW (579.20 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 10,620 kg, maximum load weight: 1,09,380 kg, overall weight: 1,20,000 kg, tire size: 315/80 22,5, axle configuration: 6x4, wheelbase: 3,250 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, operating hours: 5,47,696 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, air conditioning, airbag, cabin, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking heater, soot filter, truck registration, Vehicle number for inquiries: 41768 Mercedes-Benz, 2658 * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Refrigerator * Air suspension * Particle filter * Retarder / ZF-Intarder * Service booklet * Sleeper cab * Heated seats * Auxiliary heater * Auxiliary air conditioning * Cruise control * Immobilizer * On-board computer * Differential lock * Long-haul transport > 7.5 tons * Digital tachograph * Fleetboard * Radio/CD player * CB radio * Sound system * OBU preparation * Refrigerator * Airbag * Electric windows and mirrors * Remote central locking * Air horns * 2 bunks * 2 x diesel tanks * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 120,000 kg * Unladen weight: 10,620 kg * Payload: 109,380 kg * Permissible gross vehicle weight: 120,000 kg * Tire condition, 1st axle: -- Tire size: 315/80 R22.5 * Tire condition, 2nd axle: -- Tire size: 315/80 R22.5 * Tire condition, 3rd axle: -- Tire size: 315/80 R22.5 * Wheelbase: 3250 mm * Tire sizes: 315/80 R22.5 * 2658 LS 6x4 F 16 Big Space Heavy-duty 120 tons * Special body behind the cab * Large light bar with all-round lights * Stainless steel boxes and running boards * Heavy-duty fifth wheel coupling 35 * Tires front axle 385/65 R 22.5 - rear axle 315/80 R 22.5 Disclaimer: Subject to changes, prior sale and errors You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents Lrsdpfxoz Efyus Ab Uet * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,580 mm, total width: 3,350 mm, overall weight: 3,200 kg, product length (max.): 1,630 mm, number of axes: 3, This 3-axis AGIE AGIETRON INTEGRAL 2 was manufactured in 2006. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 350 mm in the Z-axis. The machine can accommodate workpieces up to 840 x 670 x 250 mm and has a maximum electrode weight of 100 kg. If you are looking to get high-quality die-sinking capabilities, consider the AGIE AGIETRON INTEGRAL 2 machine we have for sale. Contact us for further details. • Units available: 2 • Workpiece size: 840 x 670 x 250 mm • Weight: 400 kg • Number of electrodes: 28 • Max. electrode weight: 100 kg • Circuit diagram: 625942.8 Lsdoz D Uwaepfx Ab Ujrt • Electrical: 3 × 400 V, 50 Hz, 6.1 kVA, 8.8 A

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Lredjzzbitepfx Ab Uet Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Handtmann VF 622 Vacuum Filling Machine with Grinder Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model: VF 622 Year of manufacture: 2002 Power: 9.0 kW Voltage: 3×400 V / 50 Hz Current: 13 A The Handtmann VF 622 vacuum filling machine is a reliable solution for filling and portioning meat products and other food masses. Equipped with a vacuum system, it ensures high dosing accuracy and excellent de-aeration of stuffing, improving the quality of the final product. The unit features an integrated grinder (meat mincer), which allows meat to be ground directly during the filling process, increasing productivity and reducing processing time. Lodoxq N Agepfx Ab Uort

Condition: excellent (used), Year of construction: 2014, S015901 PROD. BOGE TYPE SLF101-1 S/N 5077884 YEAR 2014 POWER (kW) 90 CAPACITY (m3/min) 4.94-12.25 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Lrodpfoz Eakzex Ab Ujt NEW/USED USED

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun Ledpfx Aozwd Auob Usrt • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50