Used Orox Fabric Cutting Machine for sale (69,424)

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Hedpfxeydnw Ds Af Ejfh Power requirement : 3 kW

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G Hfedpfx Ajg Eglpef Esh 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: ready for operation (used), Year of construction: 2005, The Wohlenberg 76 (2005 model) is a robust, high-precision industrial paper guillotine designed for cutting paper, cardboard, plastic, foil, and leather. Hfjdpfx Afezavlbs Esh Technical SpecificationsMaximum Cutting Width: 760 mm (29.9 inches)Maximum Feeding Depth: 760 mmMaximum Clamp Opening (Stack Height): 110 mmTable Height: 870 mmBackgauge / Saddle Speed: 30 cm/sTotal Machine Weight: Approximately 1,200 kg to 1,650 kg (depending on specific table configurations)Electrical Requirements: 3-Phase, 380V, 50 HzKey Operational FeaturesControl Interface: Equipped with an LCD color display and an alphanumeric keypad supporting multiple languages.Automation: Features a built-in autoprogrammer capable of storing up to 1,500 custom cutting programs. Data Integration: Table Setup: Chromed central air table complemented by chromed side air tables for easy stock manipulation.Hydraulics: Adjustable hydraulic pressure clamping to match the density of varying materials.Safety EquipmentInfrared Safety Grids: Light beam guarding system protects the operator during the cutting cycle.Two-Hand Control: Requires simultaneous two-handed engagement to activate the knife safety sequence.Mechanical Safety: Includes rear table guarding and a physical pressure bar.

Condition: excellent (used), Year of construction: 2006, Cutting machine ESSEPIGI Hjdpfx Afot Uk N Ns Eefh

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting machine TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Hsdpfxjza Daae Af Esfh Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Operating hours: 59821 hours Laser beam on: 36350 hours Standard equipment: Machine - Enclosed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Working area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the internet Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with certified viewing window door on the right - Sliding roof + Nozzle changer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Overall height: 1350 mm Width with control panel: 850 mm Depth: 1420 mm Motor power: 1.5 / 3.0 kW Hjdpeza Af Ujfx Af Eefh Disc diameter: 200 mm Cutting range up to: 40 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: Hodey Hgrmopfx Af Esfh - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm - Z-axis: motorized Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system - Basic tool box kit - Tool cabinet

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) Hfjdpfowh Sh Nex Af Eeh

Condition: used, Year of construction: 2020, CNC portal plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Hsdpfex Dlwmox Af Eofh Track width: 4,000 mm 1 oxyfuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cut Extraction table Beuting without filter system Software: Omniwin with Bevel ä3626

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Hfodpfx Ajwiatijf Esh Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, MONNIER + ZAHNER M 600 is a Thread whirl cutting machine engineered for precision, high accuracy and reliability. Working capacities: maximum module 1 mm; external threads on diameters from 3 to 13 mm; thread length up to 110 mm; maximum workpiece length 300 mm. Main technical specifications: stepless spindle speeds from 4,000 to 6,000 rpm; voltage 50 Hz, 3x 380 V; spindle motor 1 kW; machine weight approx. 1,500 kg; overall dimensions L 1800 x W 1400 x H 2000 mm. Accessories: lamp and status light. Delivers tight tolerances; typical applications include automotive, watchmaking, machine tools, aerospace and medical. Hedjza Ul Hopfx Af Eofh

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hfedsza Ukispfx Af Esh

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: Hfjdpfju Tg Spex Af Eoh There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, In very good condition Cutting machine Wohlenberg CUT-Tec 92 Schneidmaschine / Cutting machine Wohlenberg CUT-Tec 92 Year 2002 - Serial-No. 3810-001 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Display / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Hedpfx Afjy U U Ske Eefh Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Model: CT Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Hfsdpfog I H Iyjx Af Eeh Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: excellent (used), Year of construction: 2005, Max. glass dimensions: 6000 x 3210 mm The machine is equipped with a shape scanner. Width: 7000 mm Hsdpfx Aezdf Hcjf Ejfh Height: 910 mm (working height) Depth: 3600 mm Condition: very good

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10,691 h, control type: CNC control, laser type: fiber laser, laser hours: 10,691 h, power: 10 kW (13.60 HP), overall weight: 19,000 kg, total length: 19,900 mm, total width: 4,100 mm, total height: 2,730 mm, Equipment: dust extraction, 2023 Model Prima Power Laser Genius+ 2060 Machine Dimensions: 19,900 x 4,100 x 2,730 mm Machine Weight: 19,000 kg Total Operating Hours: 10,691 hours Regularly serviced and kept in clean working condition Technical Specifications 2000 x 6000 mm Dual Table System 10 kW Fiber Laser Working Area: 2200 mm x 6220 mm IPG Resonator Donaldson Dust Collection Unit Linear Motor System on X and Y Axes Our machine is currently in active operation. You are welcome to visit our facility and inspect the machine in person. Hfedpsy Taakefx Af Ejh Transportation and shipping costs are the responsibility of the buyer.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 20,000 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser power: 4,000 W, AMADA LC 3015 X1 NT – Laser Cutting Machine for Sale For sale: A used CO₂ laser cutting machine, manufacturer Amada, model LC 3015 X1 NT. This reliable, industrial-grade solution from the renowned Japanese manufacturer is ideal for high-precision cutting of steel, stainless steel, and aluminium sheets. General Information Year of manufacture: 2008 Operating hours: approx. 20,000 h Laser power: 4 kW Working Range and Traverse Speeds X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis stroke: 120 mm Max. rapid feed X/Y: 85 m/min Hfodpfoy Hxy Njx Af Eeh Max. rapid feed Z: 60 m/min Max. workpiece weight: 730 kg Cutting Capacities Mild steel: up to 20 mm Stainless steel: up to 15 mm Aluminium: up to 12 mm Included Equipment - Donaldson filtration system - Sheet material storage (without shuttle table) Dimensions and Weight Approx. dimensions: 6,670 × 2,360 × 2,100 mm Total weight: 11,700 kg Why Choose This Machine? The Amada LC 3015 X1 NT is a true workhorse for sheet metal fabrication. The spacious 3 × 1.5 m working area accommodates standard sheet formats in a single setup, and the built-in sheet storage optimizes material flow and reduces manual loading efforts. The robust 4 kW laser source ensures reliable cutting of thicker materials, while the Donaldson filtration system maintains a clean working environment. Delivery and Inquiries The machine is offered as is. Further details, photos, and quotes for dismantling, transport, and potential commissioning are available upon request.

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Hedpfxsyuvcij Af Esfh Translated with (free version) *

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Hsdpou Nu R Iofx Af Eefh Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Hfjdpfoy Iu Rtsx Af Ejh Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Condition: new, functionality: fully functional, Processing range: Diameter - 40-550mm, Length - 6000-12000mm Laser source - MAX Photonics Laser power - 6000W/12000W Hfodownrarspfx Af Eoh Laser head - Boci BLT5 bevel head CNC control - FSCUT5000S EtherCAT-BUS Software - CAD/CAM: Tubest, Tube Pro Loading - 4000-12000 mm Unloading - 0-8000mm Load capacity - max. 3000kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m

Condition: used, functionality: fully functional, Year of construction: 2007, control type: CNC control, For sale: CO₂ Tube Laser BLM Group Adige LT712D The machine is fully operational and in daily use in production. Inspection and testing on site are possible. The laser source ROFIN RF tube DC025 has been replaced with a new one. The new source has only 2386 operating hours. Hedpfx Asy R Tt Ssf Ejfh Specifications: Model: BLM Adige LT712D CO₂ tube laser Year of manufacture: 2007 Laser source: Rofin RF tube DC025 New laser source operating hours: 2386 h Total machine operating hours: 89186 h Automatic tube loading and unloading CNC control Autofocus cutting head Suitable for cutting round, square, and rectangular profiles Automatic profile centering and measurement devices Professional industrial construction Scope of supply: Rofin DC-K laser integration AK-HP 591-LT712 cutting head 5” focusing system 6500 mm tube system Automatic unloading module The machine is suitable for the production of metal constructions, furniture, automotive, tubular structures, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Hodpfswnqwcsx Af Ejfh Machine no: 7411231

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Hjdpfevxtc Dex Af Esfh