Used Oskar Frech Dak 200 for sale (15,649)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Dsdjy Hkd Hopfx Aa Njcg Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Djdpfxoq H Sqdj Aa Nocg Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Dedpfxey A Exqj Aa Nocg DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Dodpfx Aasw S Dmdj Nocg Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Dcsdpfxsyagide Aa Nog Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Dodpfx Ajy D Ihwja Nscg Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Dsdey Egm Iopfx Aa Nscg

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dsdpjv Sbmqjfx Aa Necg Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Dcedpfxowp Eblj Aa Neg Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Dodpfx Aaoyvgf Ds Nocg Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading Dedpfx Aajycckcj Nocg 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, Year of construction: 2016, machine/vehicle number: 0-250-50-2434, functionality: fully functional, year of last overhaul: 2026, Equipment: documentation/manual, We offer this used Weeke BHX 200 optimat vertical woodworking centre, year of manufacture 2016. Including workpiece return system. Dcjdpfxjy Iy U Rs Aa Nsg If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,300 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Lifting Dough Mixer Diosna mobile mixer Model: D 200 a Dough machine with flour dust cover 2 bowl trolleys Robust engineering 2 speeds Connection: 400V, 32A-CEE plug Refurbished used machine Options: Leasing & rental service Floor anchoring Dcodpfx Aouyrzroa Nsg Delivery service Maintenance contract E-Box Service package Commissioning & instruction More lifting dough mixers in stock!

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Dcsdpfxoyz Tmyj Aa Nsg Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve

Condition: excellent (used), Year of construction: 2023, I sell the throughfeed CNC drilling machine HOMAG Weeke Drillteq V-200 (BHX 055), Year 2023. Configuration: 1pc. milling head with tool change 4 positions HSK63 13 + 4 + 2 pcs. drilling units 1pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Dcodey Hfp Rspfx Aa Neg With full documentation and CE. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Djdpfjwn Hfisx Aa Necg Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools The machine is not fully operational; the right-hand cylinder is leaking; the machine descends unevenly; the hydraulic pump is noisy

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads Dodjy Ixbvepfx Aa Nscg - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Djdey Iw Tdjpfx Aa Necg Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm Dcedpfx Aaey Iw Nfs Neg - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Dodpoy Nfz Eefx Aa Njcg Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 5850 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), functionality: fully functional, DIOSNA SP 200 D Spiral Mixer Capacity: 200 kg dough, 120 kg flour Bowl diameter 90cm Stainless steel bowl 2 timers Dodpfoy A I T Rsx Aa Necg 2 speeds with automatic shift from first to second speed Electrical supply: 400v, 32 A Completely refurbished Assistance with transportation

Condition: like new (used), functionality: fully functional, DIOSNA 200 2G Hubkneter Dsdpfsy A I S Hox Aa Njcg Dough Kneader Capacity: 200 kg dough, 120 kg flour Bowl Diameter: 90 cm 2 speed levels, new timer ty94 Electrical supply: 380v, 32A Completely refurbished Assistance with transportation

Condition: used, Year of construction: 2019, Washing plant by "HIGHTECH", model "LU 200 A" Dsdpfx Aoy I A Adsa Nocg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 05/2028, total width: 950 mm, input frequency: 50 Hz, type of input current: three-phase, power: 13.6 kW (18.49 HP), electrical fuse: 50 A, Spiral Mixer Sinmag Model: SM2-200 T Kneading machine with advanced and robust technology! Digital Easy Panel & 99 programs with reverse button Dough mixer with 3 programmable timers 1 mixing speed and 2 forward speeds Simple and sturdy technology! Flour dust cover with damper Stainless steel bowl and spiral Machine mobile with 4 locking castors DGUV V3-tested exclusively by us Connection: 400V, 32A CEE plug Dimensions: 950 x 1560 x 1600/2200mm (W x D x H) NEW machine, SAB certified 24 months warranty + spare parts service TOP quality and pricing in one machine! Option: Leasing & rental service Delivery service Service package Djdpfovvgfaex Aa Nscg Maintenance contract Spare parts box Instruction & commissioning Many more TOP spiral mixers in stock!

Year of construction: 1971, condition: ready for operation (used), A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible. Dcedpoy Ndd Sefx Aa Njg