Used Palette Wrapping Machine for sale (66,249)

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Gedpfxjzmyzfe Aatskb

Condition: used, Year of construction: 2005, XYZ Proturn SLX 555-2M CNC/Manual Lathe. S/No. SBLG 00041 (2005) with Proto Trak SLX Control (Control Retrofitted 2019), Chuck Size 310mm Diameter, Gap Bed, Swing Over Bed 660mm Diameter, 2000mm Between Centres, 3 Position QCTP, Spindle Speeds 30 - 1800rpm Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gjdpfjzy N Injx Aatskb

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, Godow U Sf Tepfx Aatskb spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Gkedpfoydvzdex Aatjb Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Gedpfx Ajzuxn Teatokb Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Gsdezg D I Aepfx Aatjkb NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. Gjdpfx Ajzt Ni Ejatskb The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Gjdpozy N Syefx Aatokb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Gedpfx Aajzy N Rcotjkb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Gkjdpeyzf Naofx Aatsb Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Gkodpfeya H Nkjx Aatjb Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Gkodpfx Aozb Ipzeateb 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm Gkjdpfx Aezf Nk Toatob • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Gjdpozrnkrsfx Aatekb Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Godpfjzmtciox Aatjkb Further technical information and detailed photographs can be provided on request.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Gksdpfx Aozmt U Ejateb

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. Gjdpfoza T A Rox Aatjkb The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW Gsdpfx Ajy Nd Sioatekb weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Gkedpfoxftqdox Aateb Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Gjdpfjzy Ukbjx Aatekb Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Gsdpfxszu Ni Uj Aatjkb Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN Godpfey Du N Uox Aatokb MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle Gsdpszw Tzasfx Aatskb – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Gkjdpjzl S T Rjfx Aatjb Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Gkedow Hxiwopfx Aatob Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----